OpenLegislation

Division (c) When showing compliance with the requirements of this Section, account shall be taken of the following parameters:

United Kingdom

Original text. Later amendments are not shown.

  1. (1)

    mass of the helicopter;

  2. (2)

    the helicopter configuration;

  3. (3)

    the environmental conditions, in particular:

    1. (i)

      pressure altitude and temperature;

    2. (ii)

      wind:

      1. (A)

        except as provided in (C), for take-off, take-off flight path and landing requirements, accountability for wind shall be no more than 50 % of any reported steady headwind component of 5 kt or more;

      2. (B)

        where take-off and landing with a tailwind component is permitted in the AFM, and in all cases for the take-off flight path, not less than 150 % of any reported tailwind component shall be taken into account; and

      3. (C)

        where precise wind measuring equipment enables accurate measurement of wind velocity over the point of take-off and landing, wind components in excess of 50 % may be established by the operator, provided that the operator demonstrates to the F1CAA that the proximity to the FATO and accuracy enhancements of the wind measuring equipment provide an equivalent level of safety;

  4. (4)

    the operating techniques; and

  5. (5)

    the operation of any systems that have an adverse effect on performance.

Annotations

Textual amendments

F1

Word in Annex 4 point CAT.POL.H.105(c)(3)(ii)(C) substituted (31.12.2020) by The Aviation Safety (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/645), regs. 1, 366(4)(b)(i) (with Sch. 3) (as amended by S.I. 2019/1098, regs. 1(3), 12); 2020 c. 1, Sch. 5 para. 1(1)