OpenLegislation

Division (a) The operator shall establish mass and balance data and produce mass and balance documentation prior to each flight specifying the load and its distribution. The mass and balance documentation shall enable the commander to determine that the load and its distribution is such that the mass and balance limits of the aircraft are not exceeded. The mass and balance documentation shall contain the following information:

United Kingdom

Original text. Later amendments are not shown.

  1. (1)

    Aircraft registration and type;

  2. (2)

    Flight identification, number and date;

  3. (3)

    Name of the commander;

  4. (4)

    Name of the person who prepared the document;

  5. (5)

    Dry operating mass and the corresponding CG of the aircraft:

    1. (i)

      for performance class B aeroplanes and for helicopters the CG position may not need to be on the mass and balance documentation if, for example, the load distribution is in accordance with a pre-calculated balance table or if it can be shown that for the planned operations a correct balance can be ensured, whatever the real load is;

  6. (6)

    Mass of the fuel at take-off and the mass of trip fuel;

  7. (7)

    Mass of consumables other than fuel, if applicable;

  8. (8)

    Load components including passengers, baggage, freight and ballast;

  9. (9)

    Take-off mass, landing mass and zero fuel mass;

  10. (10)

    Applicable aircraft CG positions; and

  11. (11)

    The limiting mass and CG values.

The information above shall be available in flight planning documents or mass and balance systems. Some of this information may be contained in other documents readily available for use.