# Commission Regulation (EU) No 143/2013 of 19 February 2013 amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards the determination of CO2 emissions from vehicles submitted to multi-stage type-approval (Text with EEA relevance), Annex II

Extent: E+W+S+N.I.

Annexes I and XII to Regulation (EC) No 692/2008 are amended as follows:
(1) in Appendix 3 of Annex I, the following points 2.17, 2.17.1 and 2.17.2 are inserted:
‘2.17.
Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N1 within the scope of Regulation (EC) No 715/2007): yes/no (1)
2.17.1.
Mass of the base vehicle in running order: … kg
2.17.2.
Default added mass, calculated in accordance with Section 5 of Annex XII to Regulation (EC) No 692/2008: … kg’
(2) in Annex XII, the following Section 5 is added:
‘5.
DETERMINATION OF CO2 EMISSIONS AND FUEL CONSUMPTION FROM N1 VEHICLES SUBMITTED TO MULTI-STAGE TYPE-APPROVAL
5.1.
For the purpose of determining the CO2 emissions and fuel consumption of a vehicle submitted to multi-stage type-approval, as defined in Article 3(7) of Directive 2007/46/EC, the base vehicle, as defined in Article 3(18) of that Directive, shall be tested in accordance with points 2 and 3 of this Annex.
5.2.
The reference mass to be used for the testing shall be the one resulting from the following formula:
RM = RM Base_Vehicle + DAM
In this formula:
RM reference mass to be used for the testing in kg
RM Base_Vehicle reference mass of the base vehicle, as defined in Article 3(3) of Regulation (EC) No 715/2007, in kg
DAM default added mass, calculated in accordance with the formula set out in point 5.3, corresponding to the estimated weight of the bodywork fitted to the base vehicle, in kg.
5.3.
The default added mass shall be calculated according to the following formula:
DAM: a × TPMLM – RM Base_Vehicle
In this formula:
DAM default added mass in kg
a multiplying factor, calculated in accordance with the formula set out in point 5.4
TPMLM technically permissible maximum laden mass, stated by the manufacturer of the base vehicle, in kg
RM Base_Vehicle reference mass of the base vehicle, as defined in Article 3(3) of Regulation (EC) No 715/2007, in kg.
5.4.
The multiplying factor shall be calculated according to the following formula:
a = 3,162.·10 – 7 RM 2 Base_vehicle – 5,823396·10 – 4 RM Base_vehicle + 0,4284491516
In this formula:
a multiplying factor
RM Base_Vehicle reference mass of the base vehicle, as defined in Article 3(3) of Regulation (EC) No 715/2007, in kg.
5.5.
The manufacturer of the base vehicle is responsible for the correct application of the requirements laid down in points 5.1 to 5.4.
5.6.
The manufacturer of the completed vehicle shall include, in the certificate of conformity, the information concerning the base vehicle, in accordance with Annex IX to Directive 2007/46/EC.
5.7.
In the case of vehicles submitted to individual vehicle approval, the individual approval certificate shall include the following information:
(a) the CO2 emissions measured according to the methodology set out in points 5.1 to 5.4;
(b) the mass of the completed vehicle in running order;
(c) the identification code corresponding to the type, variant and version of the base vehicle;
(d) the type-approval number of the base vehicle, including the extension number;
(e) the name and address of the manufacturer of the base vehicle;
(f) the mass of the base vehicle in running order.
5.8.
The procedure set out in points 5.1 to 5.7 shall apply to base vehicles of category N1, as defined in point 1.2.1 of Part A of Annex II to Directive 2007/46/EC, included in the scope of Regulation (EC) No 715/2007.’.

---
Source: https://www.legislation.gov.uk/eur/2013/143/annex/II (the official version)
Page: https://openlegislation.uk/eu-regulation-2013-143/annex-II
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.