# Commission Regulation (EU) No 195/2013 of 7 March 2013 amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as concerns innovative technologies for reducing CO2 emissions from light passenger and commercial vehicles (Text with EEA relevance), Annex II Extent: E+W+S+N.I. ‘ANNEX VIII TEST RESULTS (To be completed by the type-approval authority and attached to the vehicle EC type-approval certificate) In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one result. However, a combination of several results per version indicating the worst case is permissible. In the latter case, a note shall state that for items marked (*) only worst case results are given. 1. Results of the sound level tests Number of the base regulatory act and latest amending regulatory act applicable to the approval. In case of a regulatory act with two or more implementation stages, indicate also the implementation stage: Variant/Version: … … … Moving (dB(A)/E): … … … Stationary (dB(A)/E): … … … at (min– 1): … … … 2. Results of the exhaust emission tests 2.1. Emissions from motor vehicles tested under the test procedure for light-duty vehicles Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Fuel(s) … (diesel, petrol, LPG, NG, Bi-fuel: petrol/NG, LPG, Flex-fuel: petrol/ethanol, NG/H2NG…) 2.1.1. Type 1 test (vehicle emissions in the test cycle after a cold start) Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … 2.1.2. Type 2 test (emissions data required at type-approval for roadworthiness purposes) Type 2, low idle test: Variant/Version: … … … CO (% vol.) … … … Engine speed (min– 1) … … … Engine oil temperature (°C) … … … Type 2, high idle test: Variant/Version: … … … CO (% vol.) … … … Lambda Value … … … Engine speed (min– 1) … … … Engine oil temperature (°C) … … … 2.1.3. Type 3 test (emissions of crankcase gases): … 2.1.4. Type 4 test (evaporative emissions): …g/test 2.1.5. Type 5 test (durability of anti-pollution control devices): Ageing distance covered (km)(e.g. 160 000 km): … Deterioration factor DF: calculated/fixed Values: Variant/Version: … … … CO … … … THC … … … NMHC … … … NOx … … … THC + NOx … … … Mass of particulate matter (PM) … … … Number of particles (P) (1) … … … 2.1.6. Type 6 test (average emissions at low ambient temperatures): Variant/Version: … … … CO (g/km) … … … THC (g/km) … … … 2.1.7. OBD: yes/no 2.2. Emissions from engines tested under the test procedure for heavy-duty vehicles. Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:… Fuel(s) … (diesel, petrol, LPG, NG, ethanol …) 2.2.1. Results of the ESC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … 2.2.2. Result of the ELR test Variant/Version: … … … Smoke value:…m– 1 … … … 2.2.3. Result of the ETC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NMHC (mg/kWh) (1) … … … CH4 (mg/kWh) (1) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … 2.2.4. Idle test Variant/Version: … … … CO (% vol.) … … … Lambda Value (1) … … … Engine speed (min– 1) … … … Engine oil temperature (°C) … … … 2.3. Diesel smoke Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: 2.3.1. Results of the test under free acceleration Variant/Version: … … … Corrected value of the absorption coefficient (m– 1) … … … Normal engine idling speed … … … Maximum engine speed … … … Oil temperature (min./max.) … … … 3. Results of the CO2 emission, fuel/electric energy consumption, and electric range tests Number of the base regulatory act and the latest amending regulatory act applicable to the approval: 3.1. Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) The unit “l/100 km” is replaced by “m3/100 km” for vehicles fuelled with NG and H2NG, and by “kg/100 km” for vehicles fuelled with hydrogen. Variant/Version: … … … CO2 mass emission (urban conditions) (g/km) … … … CO2 mass emission (extra-urban conditions) (g/km) … … … CO2 mass emission (combined) (g/km) … … … Fuel consumption (urban conditions) (l/100 km) … … … Fuel consumption (extra-urban conditions) (l/100 km) … … … Fuel consumption (combined) (l/100 km) … … … 3.2. Externally chargeable hybrid electric vehicles (OVC) Variant/Version: … … … CO2 mass emission (Condition A, combined) (g/km) … … … CO2 mass emission (Condition B, combined) (g/km) … … … CO2 mass emission (weighted, combined) (g/km) … … … Fuel consumption (Condition A, combined) (l/100 km) (g) … … … Fuel consumption (Condition B, combined) (l/100 km) (g) … … … Fuel consumption (weighted, combined) (l/100 km) (g) … … … Electric energy consumption (Condition A, combined) (Wh/km) … … … Electric energy consumption (Condition B, combined) (Wh/km) … … … Electric energy consumption (weighted and combined) (Wh/km) … … … Pure electric range (km) … … … 3.3. Pure electric vehicles Variant/Version: … … … Electric energy consumption (Wh/km) … … … Range (km) … … … 3.4. Hydrogen fuel cell vehicles Variant/Version: … … … Fuel consumption (kg/100 km) … … … 4. Results of the tests for vehicles fitted with eco-innovation(s) (h4) Number of the Commission Decision approving the eco-innovation. (h5) Assigned in the Commission Decision approving the eco-innovation. (h6) If a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology. (h7) Sum of the CO2 emissions savings of each individual eco-innovation. Variant/Version … Decision approving the eco-innovation Code of the eco-innovation 1. CO2 emissions of the baseline vehicle (g/km) 2. CO2 emissions of the eco-innovation vehicle (g/km) 3. CO2 emissions of the baseline vehicle under Type 1 test-cycle 4. CO2 emissions of the eco-innovation vehicle under Type 1 test-cycle (= 3.5.1.3) 5. Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4 *5 xxxx/201x … … … … … … … … … … … … … … … … … … … … … … … Total CO2 emissions savings (g/km) … 4.1. General code of the eco-innovation(s) Explanatory notes (h) Eco-innovations. --- Source: https://www.legislation.gov.uk/eur/2013/195/annex/II (the official version) Page: https://openlegislation.uk/eu-regulation-2013-195/annex-II Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.