# Commission Regulation (EU) No 283/2013 of 1 March 2013 setting out the data requirements for active substances, in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council concerning the placing of plant protection products on the market (Text with EEA relevance), Division 7.2.2.2: Aerobic mineralisation in surface water

Extent: E+W+S+N.I.

The data and information provided, together with other relevant data and information, shall be sufficient to:
(a)identify individual components present, which at any time account for more than 10 % of the amount of active substance added, including, where possible, non-extractable residues;
(b)identify individual components present, which account for more than 5 % of the amount of active substance added in at least two sequential measurements, where possible;
(c)identify individual components (> 5 %) for which at the end of the study the maximum of formation is not yet reached, where possible;
(d)identify or characterise, where possible, other individual components;
(e)establish, where relevant, the relative proportions of the components (mass balance); and
(f)permit, where relevant, the sediment residue of concern and to which non-target species are or may be exposed, to be defined.

---
Source: https://www.legislation.gov.uk/eur/2013/283/annex/section/7/division/7.2/division/7.2.2/division/7.2.2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2013-283/annex/section-7/division-7.2/division-7.2.2/division-7.2.2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.