{
  "url": "https://openlegislation.uk/eu-regulation-2013-397/annex",
  "json_url": "https://openlegislation.uk/eu-regulation-2013-397/annex.json",
  "legislation": "eur/2013/397",
  "legislation_title": "Commission Regulation (EU) No 397/2013 of 30 April 2013 amending Regulation (EC) No 443/2009 of the European Parliament and of the Council as regards the monitoring of CO2 emissions from new passenger cars (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2013-397",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "Annex II to Regulation (EC) No 443/2009 is replaced by the following:\n‘ANNEX II\nMONITORING AND REPORTING EMISSIONS\nPART A —\nCollection of data on new passenger cars and determination of CO2 monitoring information\n1.\nMember States shall, for each calendar year, record the following detailed data for each new passenger car registered in their territory:\n(a) the manufacturer;\n(b) the type-approval number with its extension;\n(c) the type, variant, and version;\n(d) make and commercial name;\n(e) category of vehicle type-approved;\n(f) total number of new registrations;\n(g) mass;\n(h) the specific emissions of CO2;\n(i) footprint: the wheel base, the track width steering axle and the track width other axle;\n(j) the fuel type and fuel mode;\n(k) engine capacity;\n(l) electric energy consumption;\n(m) code for the innovative technology or group of innovative technologies and the CO2 emissions reduction due to that technology.\n2.\nThe detailed data referred to in point 1 shall be taken from the certificate of conformity of the relevant passenger car or be consistent with the certificate of conformity issued by the manufacturer of the relevant passenger car. Where the certificate of conformity is not used, Member States shall put the necessary measures in place to ensure adequate accuracy in the monitoring procedure. Where both a minimum value and a maximum value are specified for the mass or footprint values referred to in point 1(i) for a passenger car, Member States shall use only the maximum figure for the purposes of this Regulation. In the case of bi-fuelled vehicles (petrol/gas), the certificates of conformity of which bear specific CO2 emissions figures for both types of fuel, Member States shall use only the figure measured for gas.\n3.\nMember States shall, for each calendar year, determine:\n(a) the sources used for the collection of the detailed data referred to in point 1;\n(b) the total number of new registrations of new passenger cars subject to EC type-approval;\n(c) the total number of new registrations of new individually approved passenger cars;\n(d) the total number of new registrations of new passenger cars approved nationally in small series;\n(e) the percentage of all fuel filling stations on their territory providing E85.\nPART B —\nMethodology for determining CO2 monitoring information for new passenger cars\nMonitoring information which Member States are required to determine in accordance with points 1 and 3 of Part A shall be determined in accordance with the methodology in this Part.\n1.\nNumber of new passenger cars registered\nMember States shall determine the number of new passenger cars registered within their territory in the respective monitoring year divided into vehicles subject to EC type-approval, individual approvals and national approvals of small series.\n2.\nThe distribution by version of new passenger cars\nFor each version of each variant of each type of new passenger car, the number of newly registered passenger cars and the detailed data referred to in point 1 of Part A shall be recorded.\n3.\nThe fuel stations in their territory that supply E85 fuel shall be indicated in accordance with Article 6 of Commission Regulation (EU) No 1014/2010.\nPART C —\nFormat for the transmission of data\nFor each year, Member States shall report the information specified in points 1 and 3 of Part A in the following formats:\nAggregated data including general information specified in point 3 of Part A:\nISO 3166 alpha-2 codes with the exception of Greece and the United Kingdom for which the codes are “EL” and “UK” respectively.\nMember State\nYear\nData source\nTotal number of new registrations of new passenger cars subject to EC type-approval\nTotal number of new registrations of new individually approved passenger cars\nTotal number of new registrations of new passenger cars approved nationally in small series\nPercentage of all fuel filling stations providing E85, in accordance with Article 6(1) of Regulation (EU) No 1014/2010\nTotal number of fuel filling stations providing E85 where the proportion of those stations exceeds 30 % of all fuel filling stations, in accordance with Article 6(2) of Regulation (EU) No 1014/2010\nDetailed data specified in point 1 of Part A:\nIn accordance with Article 6.\nIn accordance with Article 12.’\nYear\nManufacturer nameEU standard denomination\nManufacturer nameManufacturer denomination\nManufacturer nameNational Registry denomination\nType-approval number and its extension\nType\nVariant\nVersion\nMake\nCommercial name\nCategory of vehicle type-approved\nTotal number of new registrations\nMass (kg)\nSpecific emissions of CO2 (g/km)\nWheelbase (mm)\nTrack width steering axle (mm)\nTrack width other axle (mm)\nFuel type\nFuel mode\nEngine capacity (cm3)\nElectric energy consumption (Wh/km)\nInnovative technology or group of innovative technologies code\nEmissions reduction through innovative technologies (g/km)\nYear 1\nManuf. 1\nManuf. 1\nManuf. 1\nTAN 1\nType 1\nVariant 1\nVersion 1\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\nYear 1\nManuf. 1\nManuf. 1\nManuf. 1\nTAN 1\nType 1\nVariant 1\nVersion 2\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\nYear 1\nManuf. 1\nManuf. 1\nManuf. 1\nTAN 1\nType 1\nVariant 2\nVersion 1\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\nYear 1\nManuf. 1\nManuf. 1\nManuf. 1\nTAN 1\nType 1\nVariant 2\nVersion 2\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…\n…",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "OJ L 293, 11.11.2010, p. 15."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "ISO 3166 alpha-2 codes with the exception of Greece and the United Kingdom for which the codes are “EL” and “UK” respectively."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "In accordance with Article 6."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "In accordance with Article 12.’"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2013/397/annex",
    "retrieved_at": "2026-11-01T14:48:41.987472+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}