# Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device (Text with EEA relevance), Division 1.1.1: Conventional water heaters in water heating energy efficiency classes A to G

Extent: E+W+S+N.I.

(a)The following information shall be included in the label:
I..supplier’s name or trade mark;
II..supplier’s model identifier;
III..the water heating function, including the declared load profile expressed as the appropriate letter in accordance with Table 3 of Annex VII;
IV..the water heating energy efficiency class, determined in accordance with point 1 of Annex II; the head of the arrow containing the water heating energy efficiency class of the water heater shall be placed at the same height as the head of the relevant energy efficiency class;
V..the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;
VI..the sound power level LWA , indoors, in dB, rounded to the nearest integer;
VII..for conventional water heaters able to work only during off-peak hours, the pictogram referred to in point 4(d)(10) of this Annex may be added.
(b)The design aspects of the label for conventional water heaters shall be in accordance with point 4 of this Annex.

---
Source: https://www.legislation.gov.uk/eur/2013/812/annex/III/division/1/division/1.1/division/1.1.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2013-812/annex-III/division-1/division-1.1/division-1.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.