Division 1.1.3 Heat pump water heaters in water heating energy efficiency classes A to G

The following information shall be included in the label:

1. I..

   supplier’s name or trade mark;

2. II..

   supplier’s model identifier;

3. III..

   the water heating function, including the declared load profile expressed as the appropriate letter in accordance with Table 3 of Annex VII;

4. IV..

   the water heating energy efficiency class under average climate conditions, determined in accordance with point 1 of Annex II; the head of the arrow containing the water heating energy efficiency class of the water heater shall be placed at the same height as the head of the relevant energy efficiency class;

5. V..

   the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, under average, colder and warmer climate conditions, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;

6. VI..

   European temperature map displaying three indicative temperature zones;

7. VII..

   the sound power level L_WA , indoors (if applicable) and outdoors, in dB, rounded to the nearest integer;

8. VIII..

   for heat pump water heaters able to work only during off-peak hours, the pictogram referred to in point 6(d)(11) of this Annex may be added.

The design aspects of the label for heat pump water heaters shall be in accordance with point 6 of this Annex. By way of exception, where a model has been granted an ‘EU Ecolabel’ F1before IP completion day under Regulation (EC) No 66/2010 of the European Parliament and of the Council^f1, a copy of the EU Ecolabel may be added.