OpenLegislation

Annex I

United Kingdom

Original text. Later amendments are not shown.

Directive 2007/46/EC is amended as follows:

  1. (1)

    Annex I is amended as follows:

    1. (a)

      the following point 0.2.2 is inserted:

      ‘0.2.2.

      For multi-stage approved vehicles, type-approval information of the base/previous stage vehicle (list the information for each stage. This can be done with a matrix)

      Type:

      Variant(s):

      Version(s):

      Type-approval number, including extension number’

    2. (b)

      the following point 0.5.1 is inserted:

      ‘0.5.1.

      For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle’

  2. (2)

    Annex III is amended as follows:

    1. (a)

      the following point 0.2.2 is inserted:

      ‘0.2.2.

      For multi-stage approved vehicles, type-approval information of the base/previous stage vehicle (list the information for each stage. This can be done with a matrix):

      Type:

      Variant(s):

      Version(s):

      Type-approval number, including extension number’

    2. (b)

      the following point 0.5.1 is inserted:

      ‘0.5.1.

      For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle’

    3. (c)

      the following points 2.17, 2.17.1 and 2.17.2 are inserted:

      ‘2.17.

      Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N1 within the scope of Regulation (EC) No 715/2007: yes/no (1)

      2.17.1.

      Mass of the base vehicle in running order: kg.

      2.17.2.

      Default added mass (DAM), calculated in accordance with Section 5 of Annex XII to Regulation (EC) No 692/2008: kg.’

  3. (3)

    Annex VI is amended as follows:

    1. (a)

      Model A, point 0.5 is amended as follows:

      ‘0.5.

      Company name and address of manufacturer of the complete/completed vehicle (1)’

    2. (b)

      Model A, the following point 0.5.1 is inserted:

      ‘0.5.1.

      For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle’

    3. (c)

      Model A, the Appendix is replaced by the following:

      ‘Appendix

      List of regulatory acts to which the type of vehicle complies

      (to be filled in only in the case of type-approval in accordance with Article 6(3)).

      In accordance with Annex IV to this Directive’
      Subjectf1 Regulatory act reference As amended byApplicable to variants

      1.

      Permissible sound level

      2.

      Emissions

      3.

      Fuel tanks/Rear protective devices

      …
  4. (4)

    Annex IX is amended as follows:

    1. (a)

      Part I, Complete and completed vehicles, is amended as follows:

      1. (i)

        in ‘Model B — Side 1, Completed vehicles, EC certificate of conformity’, point 0.2.2 is replaced by the following:

        ‘0.2.2.

        For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage):

        Type:

        Variant (a):

        Version (a):

        Type-approval number, extension number’

      2. (ii)

        in ‘Model B — Side 1, Completed vehicles, EC certificate of conformity’, point 0.5.1 is replaced by the following:

        ‘0.5.1.

        For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle’

      3. (iii)

        in ‘Side 2 — Vehicle category O3 and O4 (complete and completed vehicles)’, the following point 13.2 is inserted:

        ‘13.2.

        Actual mass of the vehicle: kg’

    2. (b)

      Part II, Incomplete vehicles, is amended as follows:

      1. (i)

        in ‘Model C1 — Side 1, Incomplete vehicles, EC certificate of conformity’, the following point 0.2.2 is inserted:

        ‘0.2.2.

        For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage):

        Type:

        Variant (a):

        Version (a):

        Type-approval number, extension number’

      2. (ii)

        in ‘Model C1 — Side 1, Incomplete vehicles, EC certificate of conformity’, the following point 0.5.1 is inserted:

        ‘0.5.1.

        For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle’

      3. (iii)

        in ‘Side 2 — Vehicle category M1 (incomplete vehicles)’, point 13.2 is deleted

      4. (iv)

        in ‘Side 2 — Vehicle category M1 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      5. (v)

        in ‘Side 2 — Vehicle category M1 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the vehicle of the incomplete vehicle: … kg’

      6. (vi)

        in ‘Side 2 — Vehicle category M2 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      7. (vii)

        in ‘Side 2 — Vehicle category M2 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      8. (viii)

        in ‘Side 2 — Vehicle category M3 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      9. (ix)

        in ‘Side 2 — Vehicle category M3 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      10. (x)

        in ‘Side 2 — Vehicle category N1 (incomplete vehicles)’, point 13 is deleted

      11. (xi)

        in ‘Side 2 — Vehicle category N1 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      12. (xii)

        in ‘Side 2 — Vehicle category N1 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      13. (xiii)

        in ‘Side 2 — Vehicle category N2 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      14. (xiv)

        in ‘Side 2 — Vehicle category N2 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      15. (xv)

        in ‘Side 2 — Vehicle category N3 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      16. (xvi)

        in ‘Side 2 — Vehicle category N3 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      17. (xvii)

        in ‘Side 2 — Vehicle category O1 and O2 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      18. (xviii)

        in ‘Side 2 — Vehicle category O1 and O2 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      19. (xix)

        in ‘Side 2 — Vehicle category O3 and O4 (incomplete vehicles)’, point 14 is replaced by the following:

        ‘14.

        Mass in running order of the incomplete vehicle: … kg’

      20. (xx)

        in ‘Side 2 — Vehicle category O3 and O4 (incomplete vehicles)’, the following point 14.2 is inserted:

        ‘14.2.

        Actual mass of the incomplete vehicle: … kg’

      21. (xxi)

        in the explanatory notes relating to Annex IX, footnote e is replaced by the following:

        ‘(e)

        Entries 4 and 4.1 shall be completed in accordance with definitions 25 (Wheelbase) and 26 (Axle spacing) of Regulation (EU) No 1230/2012 respectively’

  5. (5)

    Annex XI is amended as follows:

    1. (a)

      In appendix 1, entry 38A is amended as follows:

      ‘

      38AHead restraints (headrests), whether or not incorporated in vehicle seats

      Regulation (EC) No 661/2009

      UNECE Regulation No 25

      		DG+D

      ’

    2. (b)

      In appendix 4, entry 38A shall be deleted.

Annotations

Footnotes

f1

In accordance with Annex IV to this Directive’