Division 1 From 1 January 2016, the following product information shall be provided:

manufacturer's name or trade mark;

manufacturer's model identifier, i.e. the code, usually alphanumeric, used to distinguish a specific non-residential ventilation unit model from other models with the same trade mark or supplier's name;

declared typology in accordance with Article 2 (RVU or NRVU, UVU or BVU);

type of drive installed or intended to be installed (multi-speed drive or variable speed drive);

type of HRS (run-around, other, none);

thermal efficiency of heat recovery (in % or ‘not applicable’ if the product has no heat recovery system);

nominal NRVU flow rate in m³/s;

effective electric power input (kW);

SFP_int in W/(m³/s);

face velocity in m/s at design flow rate;

nominal external pressure (Δp_{s, ext}) in Pa;

internal pressure drop of ventilation components (Δp_s,int) in Pa;

optional: internal pressure drop of non-ventilation components (Δp_s,add) in Pa;

static efficiency of fans used in accordance with Regulation (EU) No 327/2011;

declared maximum external leakage rate (%) of the casing of ventilation units; and declared maximum internal leakage rate (%) of bidirectional ventilation units or carry over (for regenerative heat exchangers only); both measured or calculated according to the pressurisation test method or tracer gas test method at declared system pressure;

energy performance, preferably energy classification, of the filters (declared information about the calculated annual energy consumption);

description of visual filter warning for NRVUs intended for use with filters, including text pointing out the importance of regular filter changes for performance and energy efficiency of the unit;

in the case of NRVUs specified for use indoors, the casing sound power level (L_WA), rounded to the nearest integer;

internet address for disassembly instructions as referred to in point 3.