Annex V Technical documentation

The technical documentation referred to in Article 3(1)(c) shall include at least the following:

1. (a)

   the name and address of the supplier;

2. (b)

   supplier's model identifier i.e. the code, usually alphanumeric, used to distinguish a specific residential ventilation unit model from other models with the same trade mark or supplier's name;

3. (c)

   where appropriate, the references of the F1designated standards applied;

4. (d)

   where appropriate, the other calculation methods, measurement standards and specifications used;

5. (e)

   identification and signature of the person empowered to bind the supplier;

6. (f)

   where appropriate, the technical parameters for measurements, established in accordance with Annex VIII;

7. (g)

   overall dimensions;

8. (h)

   specification of the type of RVU;

9. (i)

   the specific energy consumption class of the model as defined in Annex II;

10. (j)

    the specific energy consumption (SEC) for each applicable climate zone;

11. (k)

    sound power level (L_WA);

12. (l)

    the results of calculations carried out in accordance with Annex VIII.

Suppliers may include additional information at the end of the above list.