Article 2 Definitions

The following definitions shall apply:

1. (1)

   ‘seat reference point (S)’ means the point of intersection in the median longitudinal plane of the seat between the tangential plane at the base of the padded backrest and a horizontal plane. This horizontal plane intersects the lower surface of the seat 150 mm in front of the seat reference point (S) as determined in Appendix 8 to Annex XIV.

2. (2)

   ‘control device’ means any device whose direct actuation enables the state or operation of the tractor or of any equipment linked to it to be altered.

3. (3)

   ‘shield’ means a protective device located immediately in front of a dangerous part and which, either on its own or with other parts of the machine, protects on all sides against contact with the dangerous part.

4. (4)

   ‘guard’ means a protective device which, by means of a rail, grille or similar device, provides the necessary safety distance preventing contact with the dangerous part.

5. (5)

   ‘hood’ means a protective device located in front of the dangerous part and which protects against contact with it on the covered side.

6. (6)

   ‘firmly attached’ means that removal of such devices should be possible only with the aid of tools.

7. (7)

   ‘hot surface’ means any metal surface of the tractor that reaches, during the normal use envisaged by the Manufacturer, a temperature higher than 85 °C or any plastic surface that reaches a temperature higher than 100 °C.