Chapter II OBLIGATIONS OF MANUFACTURERS

United Kingdom

1. 3Fitting and demonstration requirements related to functional safety
2. 4Application of UNECE regulations
3. 5Technical specifications on functional safety requirements and test procedures
4. 6Requirements applying to audible warning devices
5. 7Requirements applying to braking, including anti-lock and combined braking systems if fitted
6. 8Requirements applying to electrical safety
7. 9Requirements applying to the manufacturers’ declaration regarding endurance testing of functional safety critical systems, parts and equipment
8. 10Requirements applying to front and rear protective structures
9. 11Requirements applying to glazing, windscreen wipers and washers, and defrosting and demisting systems
10. 12Requirements applying to driver-operated controls including identification of controls, tell-tales and indicators
11. 13Requirements applying to the installation of lighting and light signalling devices, including automatic switching of lighting
12. 14Requirements applying to rearward visibility
13. 15Requirements applying to the roll-over protective structure
14. 16Requirements applying to safety belt anchorages and safety belts
15. 17Requirements applying to seating positions (saddles and seats)
16. 18Requirements applying to steer-ability, cornering properties and turn-ability
17. 19Requirements applying to the installation of tyres
18. 20Requirements applying to the maximum vehicle speed limitation plate and its location on the vehicle
19. 21Requirements applying to vehicle occupant protection, including interior fittings and vehicle doors
20. 22Requirements applying to maximum continuous rated and/or net power and/or vehicle speed limitation by design
21. 23Requirements applying to vehicle structure integrity