Appendix 1 Information document No … pursuant to Annex I to Commission Implementing Regulation (EU) 2020/683 relating to GB type-approval of a vehicle with respect to the permissible sound levelF1F2
United Kingdom
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.3.
Means of identification of type, if marked on the vehicle (b):
0.3.1.
Location of that marking:
0.4.
Category of vehicle (c):
0.5.
Company name and address of manufacturer:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer's representative (if any):
1.
GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1.
Photographs and/or drawings of a representative vehicle:
1.3.
Number of axles and wheels (4):
1.3.3.
Powered axles (number, position, interconnection):
1.6.
Position and arrangement of the engine:
2.
MASSES AND DIMENSIONS (f) (g) (7) (IN KG AND MM) (REFER TO DRAWING WHERE APPLICABLE)
2.4.
Range of vehicle dimensions (overall):
2.4.1.
For chassis without bodywork:
2.4.1.1.
Length (g5):
2.4.1.2.
Width (g7):
2.4.2.
For chassis with bodywork:
2.4.2.1.
Length (g5):
2.4.2.2.
Width (g7):
2.6.
Mass in running order (h)
- (a)
minimum and maximum for each variant:
- (b)
mass of each version (a matrix shall be provided):
2.8.
Technically permissible maximum laden mass stated by the manufacturer (i) (3):
3.
POWER PLANT (q)
3.1.
Manufacturer of the engine:
3.1.1.
Manufacturer's engine code (as marked on the engine, or other means of identification):
3.2.
Internal combustion engine
3.2.1.1.
Working principle: positive ignition/compression ignition, cycle four-stroke/two-stroke/rotary (1)
3.2.1.2.
Number and arrangement of cylinders:
3.2.1.2.3.
Firing order:
3.2.1.3.
Engine capacity (m): … cm3
3.2.1.8.
Maximum net power (n): … kW at … min–1 (manufacturer's declared value)
3.2.4.
Fuel feed
3.2.4.2.
By fuel injection (compression ignition only): yes/no (1)
3.2.4.2.2.
Working principle: Direct injection/pre-chamber/swirl chamber (1)
3.2.4.2.4.
Governor
3.2.4.2.4.1.
Type:
3.2.4.2.4.2.1.
Speed at which cut-off starts under load: … min–1
3.2.4.3.
By fuel injection (positive ignition only): yes/no (1)
3.2.4.3.1.
Working principle: Intake manifold (single-/multi-point (1))/direct injection/other (specify) (1)
3.2.8.
Intake system
3.2.8.1.
Pressure charger: yes/no (1)
3.2.8.4.2.
Air filter, drawings: or
3.2.8.4.2.1.
Make(s):
3.2.8.4.2.2.
Type(s):
3.2.8.4.3.
Intake silencer, drawings: or
3.2.8.4.3.1.
Make(s):
3.2.8.4.3.2.
Type(s):
3.2.9.
Silencing system
3.2.9.2.
Description and/or drawing of the silencing system:
3.2.9.4.
Exhaust silencer(s):
Type, marking of exhaust silencer(s):
Where relevant for exterior noise, reducing measures in the engine compartment and on the engine:
3.2.9.5.
Location of the exhaust outlet:
3.2.9.6.
Exhaust silencer containing fibrous materials:
3.2.12.2.1.
Catalytic convertor: yes/no (1)
3.2.12.2.1.1.
Number of catalytic convertors and elements (provide the information below for each separate unit):
3.2.12.2.6.
Particulate trap: yes/no (1)
3.3.
Electric motor
3.3.1.
Type (winding, excitation):
3.3.1.1.
Maximum hourly output: … kW
3.3.1.2.
Operating voltage: … V
3.4.
Engines or motors or combinations thereof
3.4.1.
Hybrid electric vehicle: yes/no (1)
3.4.2.
Category of hybrid electric vehicle: off-vehicle charging/non off-vehicle charging (1)
3.4.3
Operating mode switch: with/without (1)
3.4.3.1.
Selectable modes
3.4.3.1.1.
Pure electric: yes/no (1)
3.4.3.1.2.
Pure fuel consuming: yes/no (1)
3.4.3.1.3.
Hybrid modes: yes/no (1) (if yes, short description):
3.4.5.
Electric motor (describe each type of electric motor separately)
3.4.5.1.
Make:
3.4.5.2.
Type:
3.4.5.4.
Maximum power: … kW
4.
TRANSMISSION (P)
4.2.
Type (mechanical, hydraulic, electric, etc.):
4.6.
Gear ratios
Continuously variable transmission | |||
| Gear | Internal gearbox ratios(ratios of engine to gearbox output shaft revolutions) | Final drive ratio(s)(ratio of gearbox output shaft to driven wheel revolutions) | Total gear ratios |
|---|---|---|---|
Maximum for CVTf1 1 2 3 … Minimum for CVT Reverse | |||
4.7.
Maximum vehicle design speed (in km/h) (q):
6.
SUSPENSION
6.6.
Tyres and wheels
6.6.1.
Tyre/wheel combination(s)
- (a)
for tyres indicate size designation, load-capacity index and speed category symbol,
- (b)
for wheels indicate rim size(s) and off-set(s).
6.6.2.
Upper and lower limits of rolling radii
6.6.2.1.
Axle 1:
6.6.2.2.
Axle 2:
6.6.2.3.
Axle 3:
6.6.2.4.
Axle 4:
etc.
9.
BODYWORK
9.1.
Type of bodywork using the codes defined in Part C of F3Annex I to Regulation (EU) 2018/858:
9.2.
Materials used and method of construction:
12.
MISCELLANEOUS
12.5.
Details of any non-engine devices designed to reduce noise (if not covered by other items):
F412.8.
AVAS
12.8.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.8.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F512.9.
AVAS
12.9.1.
Approval number of a type of vehicle with regard to its sound emission pursuant to UNECE Regulation No 138 ( 1 )
or
12.9.2.
Complete reference to the test results of AVAS sound emission levels, measured in accordance with Regulation (EU) No 540/2014 ( 1 ).
Date:
Signed:
Position in company:
Annotations
Textual amendments
- F1
Words in Annex 1 Appendix 1 heading substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(i)(i)
- F2
Words in Annex 1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(a)
- F3
Words in Annex 1 Appendix 1 point 9.1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(i)(ii)
- F4
- F5
Footnotes
- f1
Continuously variable transmission