Appendix Addendum to GB type-approval certificate No …F1
United Kingdom
1.
Additional information
1.1.
Power plant
1.1.1.
Manufacturer of the engine:
1.1.2.
Manufacturer's engine code:
1.1.3.
Maximum net power (g): … kW at … min -1 or maximum continuous rated power (electric motor) … kWf1
1.1.4.
Pressure charger(s), make and type:
1.1.5.
Air filter, make and type:
1.1.6.
Intake silencer(s), make and type:
1.1.7.
Exhaust silencer(s), make and type:
1.1.8.
Catalyst(s), make and type:
1.1.9.
Particulate trap(s), make and type:
1.2.
Transmission
1.2.1.
Type (mechanical, hydraulic, electric, etc.):
1.3.
Non-engine devices designed to reduce noise:
2.
Test results
2.1.
Sound level of moving vehicle: … dB(A)
2.2.
Sound level of stationary vehicle: … dB(A) at … min-1
2.2.1.
Sound level of compressed air, service brake: … dB(A)
2.2.1.
Sound level of compressed air, parking brake: … dB(A)
2.2.1.
Sound level of compressed air, during the pressure regulator actuation: … dB(A)
2.3.
Data to facilitate in-use compliance test of hybrid electric vehicles, where an internal combustion engine cannot operate when the vehicle is stationary
2.3.1.
Gear (i) or position of the gear selector chosen for the test:
2.3.2.
Position of the operating switch during measurement Lwot,(i) (if switch is fitted)
2.3.3.
Pre-acceleration length lPA … m
2.3.4.
Vehicle speed at the beginning of the acceleration … km/h
2.3.5.
Sound pressure level Lwot,(i) … dB(A)
F23.
AVAS fitted: yes/no ( 1 )
F34.
Remarks…
Annotations
Textual amendments
- F1
Word in Annex 1 Appendix 2 Addendum heading substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(l)
- F2
- F3
Footnotes
- f1
-
Delete where not applicable.
Notes on Annex I
Textual amendments
- F1
Words in Annex 1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(a)
Notes on Appendix 2
Textual amendments
- F1
Annex 1 Appendix 2: By The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(k)(i), it is provided that (31.12.2022 at 11.00 p.m.) in the notes following Appendix 2, in note 1, the words “point 2.1 of Part A of Annex I to Regulation (EU) 2018/858” are substituted for “point 4 of Part A of Annex II to Directive 2007/46/EC”
- F2
Word in Annex 1 Appendix 2 heading substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(j)(i)
- F3
Words in Annex 1 Appendix 2 inserted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(j)(ii)
Marginal citations
- M1
As defined in [Article 4 of Regulation (EU) 2018/858]. [Editorial note: words in Annex 1 Appendix 2 footnote substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 76(2)(k)(ii)]
Footnotes
- f1
-
Delete where not applicable.
- f2
-
If the means of identification of type contains characters not relevant to describe the vehicle types covered by the type-approval certificate such characters shall be represented in the documentation by the symbol:‘?’ (e.g. ABC??123??).