{
  "url": "https://openlegislation.uk/eu-regulation-2014-540/annex-II/division-4/division-4.1/division-4.1.2/division-4.1.2.1/division-4.1.2.1.4/division-4.1.2.1.4.1",
  "json_url": "https://openlegislation.uk/eu-regulation-2014-540/annex-II/division-4/division-4.1/division-4.1.2/division-4.1.2.1/division-4.1.2.1.4/division-4.1.2.1.4.1.json",
  "legislation": "eur/2014/540",
  "legislation_title": "Regulation (EU) No 540/2014 of the European Parliament and of the Council of 16 April 2014 on the sound level of motor vehicles and of replacement silencing systems, and amending Directive 2007/46/EC and repealing Directive 70/157/EEC (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2014-540",
  "path": "annex/II/division/4/division/4.1/division/4.1.2/division/4.1.2.1/division/4.1.2.1.4/division/4.1.2.1.4.1",
  "kind": "division",
  "number": "4.1.2.1.4.1",
  "heading": null,
  "text": "Vehicles with manual transmissions, automatic transmissions, adaptive transmissions or CVTs tested with locked gear ratios\nThe following conditions for selection of gear ratios are possible:\n(a)if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio.\n(b)if none of the gear ratios give the required acceleration, then choose a gear ratio i, with an acceleration higher and a gear ratio i + 1, with an acceleration lower than the reference acceleration. If the acceleration value in gear ratio i does not exceed 2,0 m/s2, use both gear ratios for the test. The weighting ratio in relation to the reference acceleration awot ref is calculated by:\nk = (a wot ref – a wot (i+1))/(a wot (i) – a wot (i+1))\n(c)if the acceleration value of gear ratio i exceeds 2,0 m/s2, the first gear ratio that gives an acceleration below 2,0 m/s2 shall be used unless gear ratio i + 1 provides an acceleration less than aurban. In this case, two gears, i and i + 1 shall be used, including the gear i with the acceleration exceeding 2,0 m/s2. In other cases, no other gear shall be used. The achieved acceleration awot test during the test shall be used for the calculation of the partial power factor kP instead of awot ref.\n(d)if the vehicle has a transmission in which there is only one selection for the gear ratio, the acceleration test shall be carried out in this vehicle gear selection. The achieved acceleration is then used for the calculation of the partial power factor kP instead of awot ref.\n(e)if rated engine speed is exceeded in a gear ratio before the vehicle passes BB' the next higher gear shall be used.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2014/540/annex/II/division/4/division/4.1/division/4.1.2/division/4.1.2.1/division/4.1.2.1.4/division/4.1.2.1.4.1",
    "retrieved_at": "2026-11-01T14:47:38.922483+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}