Division 4.1.2.1.4.2
United Kingdom
Vehicles with automatic transmission, adaptive transmissions and CVTs tested with non-locked gear ratios
The gear selector position for full automatic operation shall be used.
The acceleration value awot test shall be calculated as defined in point 4.1.2.1.2.2.
The test may then include a gear change to a lower range and a higher acceleration. A gear change to a higher range and a lower acceleration is not allowed. A gear shifting to a gear ratio which is not used in urban traffic shall be avoided.
Therefore, it shall be permitted to establish and use electronic or mechanical devices, including alternate gear selector positions, to prevent a downshift to a gear ratio which is typically not used at the specified test condition in urban traffic.
The achieved acceleration awot test shall be greater or equal to aurban.
If possible, the manufacturer shall take measures to avoid an acceleration value awot test greater than 2,0 m/s2.
The achieved acceleration a wot test shall then be used for the calculation of the partial power factor kp (see point 4.1.2.1.3) instead awot ref.