{
  "url": "https://openlegislation.uk/eu-regulation-2014-540/annex-II/division-4/division-4.1/division-4.1.2/division-4.1.2.2/division-4.1.2.2.1/division-4.1.2.2.1.2",
  "json_url": "https://openlegislation.uk/eu-regulation-2014-540/annex-II/division-4/division-4.1/division-4.1.2/division-4.1.2.2/division-4.1.2.2.1/division-4.1.2.2.1.2.json",
  "legislation": "eur/2014/540",
  "legislation_title": "Regulation (EU) No 540/2014 of the European Parliament and of the Council of 16 April 2014 on the sound level of motor vehicles and of replacement silencing systems, and amending Directive 2007/46/EC and repealing Directive 70/157/EEC (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2014-540",
  "path": "annex/II/division/4/division/4.1/division/4.1.2/division/4.1.2.2/division/4.1.2.2.1/division/4.1.2.2.1.2",
  "kind": "division",
  "number": "4.1.2.2.1.2",
  "heading": "Vehicles with automatic transmissions, adaptive transmissions and CVTs",
  "text": "The gear selector position for full automatic operation shall be used. The test may then include a gear change to a lower range and a higher acceleration. A gear change to a higher range and a lower acceleration shall not be permitted. A gear shifting to a gear ratio which is not used in urban traffic, at the specified test condition, shall be avoided. Therefore, it shall be permitted to establish and use electronic or mechanical devices to prevent a downshift to a gear ratio which is typically not used at the specified test condition in urban traffic.\nIf the vehicle includes a transmission design, which provides only a single gear selection (drive), which limits engine speed during the test, the vehicle shall be tested using only a target vehicle speed. If the vehicle uses an engine and transmission combination that does not comply with the requirements set out in point 4.1.2.2.1.1, the vehicle shall be tested using only the target vehicle speed. The target vehicle speed (vBB') for the test is = 35 km/h ± 5km/h. A gear change to a higher range and a lower acceleration is allowed after the reference point of the vehicle passes line PP'. Two tests shall be performed, one with the end speed of vtest = vBB' + 5 km/h, and one with the end speed of vtest = vBB' – 5 km/h. The reported sound level shall be the result of the test with the highest engine speed obtained during the test from AA' to BB'.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2014/540/annex/II/division/4/division/4.1/division/4.1.2/division/4.1.2.2/division/4.1.2.2.1/division/4.1.2.2.1.2",
    "retrieved_at": "2026-11-01T14:47:38.922483+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}