# Regulation (EU) No 540/2014 of the European Parliament and of the Council of 16 April 2014 on the sound level of motor vehicles and of replacement silencing systems, and amending Directive 2007/46/EC and repealing Directive 70/157/EEC (Text with EEA relevance), Appendix 1: Information document No … relating to GB type-approval as separate technical unit of replacement silencing systems for motor vehicles (Regulation (EU) No 540/2014)

Extent: E+W+S+N.I.

The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.
0.
General
0.1.
Make (trade name of manufacturer):
0.2.
Type and general commercial description(s):
0.3
Means of identification of type, if marked on the separate technical unit:
0.3.1.
Location of that marking:
0.5.
Company name and address of manufacturer:
0.7.
In the case of components and separate technical units, location and method of affixing of the GB type-approval mark:
0.8.
Address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer's representative (if any):
1.
Description of the vehicle for which the device is intended (if the device is intended to be fitted to more than one vehicle type, the information requested under this point shall be supplied for each type concerned)
1.1.
Make (trade name of manufacturer):
1.2.
Type and general commercial description(s):
1.3.
Means of identification of type, if marked on the vehicle:
1.4.
Category of vehicle:
1.5.
GB whole-vehicle type-approval number:
1.6
Power plant:
1.6.1.
Manufacturer of the engine:
1.6.2.
Manufacturer's engine code:
1.6.3.
Maximum net power (g): … kW at … min–1 or maximum continuous rated power (electric motor): … kW
1.6.4.
Pressure charger(s): original part or make and marking:
1.6.5.
Air filter: original part or make and marking:
1.6.6.
Intake silencer(s): original part or make and marking:
1.6.7.
Exhaust silencer(s)): original part or make and marking:
1.6.8.
Catalyst: original part or make and marking:
1.6.9.
Particulate Trap(s): original part or make and marking:
1.7.
Transmission
1.7.1.
Type (mechanical, hydraulic, electric, etc.):
1.8.
Non-engine devices designed to reduce noise: original part or description:
1.9.
Sound-level values:
moving vehicle: … dB(A), speed stabilised before acceleration at … km/h;
stationary vehicle dB(A), at … min–1
1.10.
Value of the back pressure: … Pa
1.11.
Any restrictions in respect of use and mounting requirements:
2.
Remarks:
3.
Description of the device
3.1.
A description of the replacement silencing system indicating the relative position of each system component, together with mounting instructions
3.2.
Detailed drawings of each component, so that they can be easily located and identified, and reference to the materials used. These drawings shall indicate the place provided for the compulsory affixing of the GB type-approval mark
Date:
Signed:
Position in company:

---
Source: https://www.legislation.gov.uk/eur/2014/540/annex/IX/appendix/1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2014-540/annex-IX/appendix-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.