# Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods (Text with EEA relevance), Division 1: The information referred to in Article 4(1)(b) shall be provided in the following order:

Extent: E+W+S+N.I.

(a) supplier’s name or trade mark;
(b) supplier’s model identifier, i.e. the model identifier of the specific domestic oven to which the figures quoted below apply;
(c) the energy efficiency class of the model for each cavity as defined in Annex I, Table 1; the declared class shall not be more favourable than the class reported in the technical documentation in Annex V;
(d) the energy consumption per cycle for each cavity if available in conventional mode and in fan-forced convection mode; the measured energy consumption shall be expressed in kWh (electric and gas ovens) and in MJ (gas ovens), rounded to two decimal places; the declared value shall not be lower than the value reported in the technical documentation in Annex V;
(e) the number of cavities; the heat source(s) per cavity; the volume of each cavity.

---
Source: https://www.legislation.gov.uk/eur/2014/65/annex/VI/division/A/division/1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2014-65/annex-VI/division-A/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.