OpenLegislation

Division 1 The information referred to in Article 4(2)(b) shall be provided in the following order:

United Kingdom

Original text. Later amendments are not shown.

  1. (a)

    supplier’s name or trade mark;

  2. (b)

    supplier’s model identifier, i.e. the model identifier of the specific range hood to which the figures quoted below apply;

  3. (c)

    the energy efficiency class of the model as defined in Table 2 of Annex I; the declared class shall not be more favourable than the class reported in the technical documentation in Annex V;

  4. (d)

    the annual energy consumption of the model in kWh, as defined in point 2.1 of Annex II; the declared value shall not be lower than the value reported in the technical documentation in Annex V;

  5. (e)

    the fluid dynamic efficiency class of the model as defined in Table 3 of Annex I; the declared class shall not be more favourable than the class reported in the technical documentation in Annex V;

  6. (f)

    the lighting efficiency class of the model as defined in Table 4 of Annex I; the declared class shall not be more favourable than the class reported in the technical documentation in Annex V;

  7. (g)

    the grease filtering efficiency class of the model as defined in Table 5 of Annex I; the declared class shall not be more favourable than the class reported in the technical documentation in Annex V;

  8. (h)

    the airborne acoustical A-weighted sound power emissions (weighted average value – LWA) of a domestic range hood at minimum and maximum speed available in normal use, in dB rounded to the nearest integer; the declared value shall not be lower than the value reported in the technical documentation in Annex V.