{
  "url": "https://openlegislation.uk/eu-regulation-2014-722/annex-I",
  "json_url": "https://openlegislation.uk/eu-regulation-2014-722/annex-I.json",
  "legislation": "eur/2014/722",
  "legislation_title": "Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2014-722",
  "path": "annex/I",
  "kind": "annex",
  "number": "I",
  "heading": "TARIFF SUSPENSIONS REFERRED TO IN POINT (2) OF ARTICLE 1",
  "text": "Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1).\nCN code\nTARIC\nDescription\nRate of autonomous duty\nDate foreseen for mandatory review\n*ex 1511 90 19\n*ex 1511 90 91\n*ex 1513 11 10\n*ex 1513 19 30\n*ex 1513 21 10\n*ex 1513 29 30\n10\n10\n10\n10\n10\n10\nPalm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:\nindustrial monocarboxylic fatty acids of subheading 3823 19 10,\nmethyl esters of fatty acids of heading 2915 or 2916,\nfatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,\nfatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,\nstearic acid of subheading 3823 11 00\ngoods of heading 3401\nfatty acids with high purity of heading 2915 for the manufacture of chemical products other than products of heading 3826 or\ngoods of heading 1516\n0 %\n31.12.2014\nex 1901 90 99\nex 2106 90 98\n39\n45\nPreparation in powder form containing by weight:\n15 % or more but not more than 35 % of wheat derived Maltodextrin,\n15 % or more but not more than 35 % of whey (milk serum),\n10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,\n10 % or more but not more than 30 % of blended, aged spray dried cheese,\n5 % or more but not more than 15 % of buttermilk and\n0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid\n0 %\n31.12.2018\nex 2106 10 20\n20\nSoya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form\n0 %\n31.12.2018\nex 2207 20 00\nex 2207 20 00\nex 3820 00 00\n20\n80\n20\nFeedstock consisting of by weight:\n88 % or more but not more than 92 % of Ethanol,\n2,2 % or more but not more than 2,7 % of Monoethylene glycol,\n1,0 % but not more than 1,3 % of Methylethylketone,\n0,36 % or more but not more than 0,40 % of anionic surfactant (ca.30 % active),\n0,0293 % or more but not more than 0,0396 % of methyl isopropylketone,\n0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone,\n10 ppm or more but not more than 12 ppm of Denatonium Benzoate (Bitrex),\nNot more than 0,01 of Perfumes,\n6,5 % or more but not more than 8,0 % of water\nfor use in the manufacture of screenwash concentrate and other de-icing preparations\n0 %\n31.12.2018\nex 2707 99 99\n10\nHeavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27\n0 %\n31.12.2018\nex 2710 19 99\n10\nCatalytically hydroisomerized and dewaxed base oil comprising hydrogenated, highly isoparaffinic hydrocarbons, containing:\n90 % or more by weight of saturates, and\nnot more than 0,03 % by weight of sulphur,\nwith a viscosity index of 120 or more.\n0 %\n31.12.2018\n*ex 2823 00 00\n10\nTitanium dioxide (CAS RN 13463-67-7):\nof a purity by weight of 99,9 % or more,\nwith an average grain-size of 0,7 μm or more but not more than 2,1 μm\n0 %\n31.12.2017\nex 2827 39 85\n40\nBarium chloride dihydrate (CAS RN 10326-27-9)\n0 %\n31.12.2018\nex 2835 10 00\n20\nSodium hypophosphite (CAS RN 7681-53-0)\n0 %\n31.12.2018\n*ex 2836 99 17\n20\nZirconium (IV) basic carbonate (CAS RN 57219-64-4)\n0 %\n31.12.2018\nex 2841 70 00\n10\nDiammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)\n0 %\n31.12.2018\nex 2903 39 19\n10\n1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not more than:\n0,25 % of Sec-butyl bromide\n0,06 % of n-butyl bromide\n0,06 % of n-propyl bromide\n0 %\n31.12.2018\nex 2903 39 90\n85\n(Perfluorobutyl) ethylene (CAS RN 19430-93-4)\n0 %\n31.12.2018\nex 2903 39 90\n87\n1H-Perfluorohexane (CAS RN 355-37-3)\n0 %\n31.12.2018\nex 2905 11 00\n10\nMethanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more\n0 %\n31.12.2018\n*ex 2905 19 00\n11\nPotassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN\n0 %\n31.12.2018\nex 2905 19 00\n20\nButyltitanate monohydrate, homopolymer (CAS RN 162303-51-7)\n0 %\n31.12.2018\nex 2905 19 00\n25\nTetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)\n0 %\n31.12.2018\n*ex 2908 19 00\n10\nPentafluorophenol (CAS RN 771-61-9)\n0 %\n31.12.2018\nex 2910 90 00\n20\n2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)\n0 %\n31.12.2018\nex 2912 29 00\n70\n4-tert-Butylbenzaldehyde (CAS RN 939-97-9)\n0 %\n31.12.2018\nex 2912 29 00\n80\n4-Isopropylbenzaldehyde (CAS RN 122-03-2)\n0 %\n31.12.2018\nex 2914 50 00\n55\n2,2',4,4'-Tetrahydroxybenzophenone (CAS RN 131-55-5)\n0 %\n31.12.2018\nex 2914 70 00\n80\nTetrachloro-p-benzoquinone (CAS RN 118-75-2)\n0 %\n31.12.2018\nex 2915 39 00\n25\n2-Methylcyclohexyl acetate (CAS RN 5726-19-2)\n0 %\n31.12.2018\nex 2916 14 00\n20\nEthyl methacrylate (CAS RN 97-63-2)\n0 %\n31.12.2018\nex 2916 39 90\n48\n3-Fluorobenzoyl chloride (CAS RN 1711-07-5)\n0 %\n31.12.2018\nex 2917 19 90\n15\nDimethyl but-2-ynedioate (CAS RN 762-42-5)\n0 %\n31.12.2018\nex 2917 19 90\n25\nn-Dodecenyl succinic anhydride (CAS RN 19780-11-1)\n0 %\n31.12.2018\nex 2917 39 95\n40\nDimethyl 2-nitroterephthalate (CAS RN 5292-45-5)\n0 %\n31.12.2018\nex 2918 99 90\n25\nMethyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)\n0 %\n31.12.2018\nex 2919 90 00\n60\nBisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)\n0 %\n31.12.2018\nex 2921 42 00\n30\n4-Nitroaniline (CAS RN 100-01-6)\n0 %\n31.12.2018\n*ex 2921 42 00\n86\n2,5-Dichloroaniline (CAS RN 95-82-9)\n0 %\n31.12.2017\nex 2921 49 00\n50\n3,4-Xylidine (CAS RN 95-64-7)\n0 %\n31.12.2018\nex 2922 49 85\n80\n12-Aminododecanoic acid (CAS RN 693-57-2)\n0 %\n31.12.2018\nex 2924 29 98\n37\nBeflubutamid (ISO) (CAS RN 113614-08-7)\n0 %\n31.12.2018\nex 2924 29 98\n43\nN,N'-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (CAS RN 91-96-3)\n0 %\n31.12.2018\n*ex 2925 29 00\n20\nN-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)\n0 %\n31.12.2018\nex 2926 90 95\n23\nAcrinathrin (ISO) (CAS RN 101007-06-1)\n0 %\n31.12.2018\nex 2926 90 95\n27\nCyhalofop-butyl (ISO) (CAS RN 122008-85-9)\n0 %\n31.12.2018\nex 2927 00 00\n60\n4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0)\n0 %\n31.12.2018\nex 2930 90 99\n37\nEthanethioamide (CAS RN 62-55-5)\n0 %\n31.12.2018\nex 2930 90 99\n43\nTrimethylsulfoxonium iodide (CAS RN 1774-47-6)\n0 %\n31.12.2018\nex 2931 90 90\n33\nDi-tert-butylphosphane (CAS RN 819-19-2)\n0 %\n31.12.2018\nex 2932 20 90\n45\n2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)\n0 %\n31.12.2018\nex 2932 99 00\n53\n1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)\n0 %\n31.12.2018\n*ex 2932 99 00\n80\n1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)\n0 %\n31.12.2016\n*ex 2933 21 00\n50\n1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6)\n0 %\n31.12.2016\nex 2933 39 99\n58\n4-Chloro-1-methylpiperidine (CAS RN 5570-77-4)\n0 %\n31.12.2018\nex 2933 49 90\n80\nEthyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)\n0 %\n31.12.2018\nex 2933 59 95\n13\n2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)\n0 %\n31.12.2018\n*ex 2933 59 95\n15\nSitagliptin phosphate monohydrate (CAS RN 654671-77-9)\n0 %\n31.12.2018\nex 2933 69 80\n65\n1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)\n0 %\n31.12.2018\nex 2933 99 80\n14\n2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)\n0 %\n31.12.2018\n*ex 2935 00 90\n17\n6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1)\n0 %\n31.12.2018\n*ex 2935 00 90\n88\nN-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)\n0 %\n31.12.2018\nex 3204 11 00\n15\nColourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight\n0 %\n31.12.2018\n*ex 3204 11 00\n20\nColourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight\n0 %\n31.12.2015\n*ex 3204 11 00\n40\nColourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight\n0 %\n31.12.2016\n*ex 3204 11 00\n50\nColourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight\n0 %\n31.12.2016\n*ex 3204 11 00\n60\nColourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight\n0 %\n31.12.2016\n*ex 3204 11 00\n70\nColourant C.I. Disperse Red 343 (CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343 content of 95 % or more by weight\n0 %\n31.12.2017\n*ex 3204 12 00\n10\nColourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight\n0 %\n31.12.2016\nex 3204 12 00\n50\nColourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80 content of 99 % or more by weight\n0 %\n31.12.2018\n*ex 3204 13 00\n10\nColourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight\n0 %\n31.12.2016\n*ex 3204 13 00\n30\nColourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight\n0 %\n31.12.2017\n*ex 3204 13 00\n40\nColourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight\n0 %\n31.12.2017\n*ex 3204 15 00\n10\nColourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) (CAS RN 4424-06-0) and preparations based thereon with a colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) content of 20 % or more by weight\n0 %\n31.12.2017\n*ex 3204 15 00\n60\nColourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight\n0 %\n31.12.2018\nex 3204 15 00\n70\nColourant C.I. Vat Red 1 (CAS RN 2379-74-0)\n0 %\n31.12.2018\n*ex 3204 17 00\n10\nColourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight\n0 %\n31.12.2018\nex 3204 17 00\n13\nColourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2)\n0 %\n31.12.2018\n*ex 3204 17 00\n15\nColourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n20\nColourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n25\nColourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n30\nColourant C.I. Pigment Yellow 97 (CAS RN 12225-18-2) and preparations based thereon with a colourant C.I. Pigment Yellow 97 content of 30 % or more by weight\n0 %\n31.12.2017\n*ex 3204 17 00\n35\nColourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n40\nColourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight\n0 %\n31.12.2014\n*ex 3204 17 00\n50\nColourant C.I. Pigment Yellow 180 (CAS RN 77804-81-0) and preparations based thereon with a colourant C.I. Pigment Yellow 180 content of 90 % or more by weight\n0 %\n31.12.2014\n*ex 3204 17 00\n60\nColourant C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1 content of 50 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n65\nColourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n70\nColourant C.I. Pigment Yellow 13 (CAS RN 5102-83-0 or CAS RN 15541-56-7) and preparations based thereon with a colourant C.I. Pigment Yellow 13 content of 60 % or more by weight\n0 %\n31.12.2016\n*ex 3204 17 00\n75\nColourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight\n0 %\n31.12.2017\n*ex 3204 17 00\n80\nColourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight\n0 %\n31.12.2017\n*ex 3204 17 00\n85\nColourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight\n0 %\n31.12.2017\n*ex 3204 17 00\n88\nColourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight\n0 %\n31.12.2017\n*ex 3204 19 00\n70\nColourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight\n0 %\n31.12.2018\n*ex 3204 19 00\n71\nColourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight\n0 %\n31.12.2015\n*ex 3204 19 00\n73\nColourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight\n0 %\n31.12.2015\n*ex 3204 19 00\n77\nColourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight\n0 %\n31.12.2016\n*ex 3204 19 00\n84\nColourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight\n0 %\n31.12.2017\n*ex 3204 19 00\n85\nColourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95 % or more by weight\n0 %\n31.12.2017\n*ex 3204 20 00\n20\nColourant C.I. Fluorescent Brightener 71 (CAS RN 16090-02-1) and preparations based thereon with a colourant C.I. Fluorescent Brightener 71 content of 94 % or more by weight\n0 %\n31.12.2016\n*ex 3204 20 00\n30\nColourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight\n0 %\n31.12.2016\nex 3206 49 70\n10\nNon aqueous dispersion, containing by weight:\n57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1)\n37 % or more but not more than 42 % of titanium dioxide (CAS RN13463-67-7), and\n1 % or more but not more than 2 % of triethoxycaprylyl silane (CAS RN 2943-75)\n0 %\n31.12.2018\n*ex 3208 90 19\n15\nChlorinated polyolefins, in a solution\n0 %\n31.12.2018\nex 3208 90 19\nex 3824 90 97\n45\n61\nPolymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate\n0 %\n31.12.2018\n*ex 3701 99 00\n10\nPlate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 8542\n0 %\n31.12.2018\n*ex 3707 10 00\n40\nSensitising emulsion, containing:\nnot more than 10 % by weight of naphthoquinonediazide esters,\n2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene\nnot more than 7 % by weight of epoxy-containing derivatives\ndissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate\n0 %\n31.12.2016\n*ex 3808 91 90\n30\nPreparation containing endospores or spores and protein crystals derived from either:\nBacillus thuringiensis Berliner subsp. aizawai and kurstaki or,\nBacillus thuringiensis subsp. kurstaki or,\nBacillus thuringiensis subsp. israelensis or,\nBacillus thuringiensis subsp. aizawai or,\nBacillus thuringiensis subsp. tenebrionis\n0 %\n31.12.2014\nex 3811 21 00\n13\nAdditives containing:\nborated magnesium (C16-C24) alkylbenzene sulphonates and\nmineral oils,\nhaving a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n15\nAdditives, consisting of:\nzinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7),\ntriphenyl thiophosphate (CAS RN 597-82-0),\ntriphenyl phosphite (CAS RN 101-02-0), and\nmineral oils,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n17\nAdditives containing:\nmainly sulphurized diisobutylene,\ncalcium sulphonate,\ndialkylaminoalkyl polyisobutylene succinate, and\nmineral oils,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n25\nAdditives containing:\na (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000 but not more than 20,000, and\nmore than 15 %, but not more than 30 % by weight of mineral oils,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n27\nAdditives containing:\n20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and\nmineral oils,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n33\nAdditives containing:\ncalcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and\nmineral oils,\nhaving a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n35\nAdditives containing:\no-amino polyisobutylenephenol (CAS RN 78330-13-9),\npolyisobutylene succinimide (CAS RN 84605-20-9),\nalkenylimidazoline (CAS RN 68784-17-8),\nnonylated diphenylamine derivatives (CAS RN 36878-20-3 and CAS RN 27177-41-9), and\nmore than 30 %, but not more than 45 % by weight of mineral oils,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n37\nAdditives containing:\na styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and\nmore than 50 % but not more than 75 % by weight of mineral oils,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n43\nAdditives containing:\nborated succinimide compounds (CAS RN 134758-95-5), and\nmineral oils,\nhaving a total base number (TBN) greater than 40, for use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 21 00\n45\nAdditives containing:\nan (C8-18) alkyl methacrylate and N-[3-(dimethylamino)propyl]methacrylamide copolymer,\nan ethylene-propylene copolymer,\nan ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, and\nmore than 15 % but not more than 30 % by weight of mineral oils,\nwhether or not containing a methacrylic pour point depressant polymer, for use in the manufacture of lubricating oils\n0 %\n31.12.2018\n*ex 3811 29 00\n20\nAdditives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils\n0 %\n31.12.2017\n*ex 3811 29 00\n40\nAdditives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils\n0 %\n31.12.2017\nex 3811 29 00\n60\nAdditives containing:\nmainly sulphurized diisobutylene,\ncalcium sulphonate, and\ndialkylaminoalkyl polyisobutylene succinate\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 29 00\n70\nAdditives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 29 00\n80\nAdditives containing:\nmore than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and\nmore than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2018\nex 3811 29 00\n85\nAdditives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils\n0 %\n31.12.2018\n*ex 3823 19 30\n*ex 3823 19 30\n20\n30\nPalm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:\nindustrial monocarboxylic fatty acids of heading 3823,\nstearic acid of heading 3823,\nstearic acid of heading 2915,\npalmitic acid of heading 2915, or\nanimal feed preparations of heading 2309\n0 %\n31.12.2018\n*ex 3823 19 90\n*ex 3823 19 90\n20\n30\nPalm acid oils from refining for use in the manufacture of:\nindustrial monocarboxylic fatty acids of heading 3823,\nstearic acid of heading 3823,\nstearic acid of heading 2915,\npalmitic acid of heading 2915, or\nanimal feed preparations of heading 2309\n0 %\n31.12.2018\n*ex 3824 90 97\n18\nPoly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)\n0 %\n31.12.2014\nex 3824 90 97\n25\nPreparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene\n0 %\n31.12.2018\n*ex 3824 90 97\n33\nPreparation, containing:\ntrioctylphosphine oxide (CAS RN 78-50-2),\ndioctylhexylphosphine oxide (CAS RN 31160-66-4),\noctyldihexylphosphine oxide (CAS RN 31160-64-2) and\ntrihexylphosphine oxide (CAS RN 3084-48-8)\n0 %\n31.12.2016\n*ex 3824 90 97\n34\nZinc Dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder\n0 %\n31.12.2018\nex 3824 90 97\n46\nAdditives for paints and coatings, containing:\na mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and\n30 % or more but not more than 35 % by weight of isobutyl alcohol\n0 %\n31.12.2018\nex 3824 90 97\n57\nCarrier in powder form, consisting of:\nFerrite (Iron oxide) (CAS RN 1309-37-1)\nManganese oxide (CAS RN 1344-43-0)\nMagnesium oxide (CAS RN 1309-48-4)\nStyrene acrylate copolymer\nto be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers\n0 %\n31.12.2018\nex 3824 90 97\n63\nCatalyst containing by weight of\n52 % (± 10 %) of Cuprous Oxide (CAS RN 1317-39-1),\n38 % (± 10 %) of Cupric Oxide (CAS RN 1317-38-0) and\n10 % (± 5 %) of Metallic Copper (CAS RN 7440-50-8)\n0 %\n31.12.2018\nex 3824 90 97\n80\nPreparation consisting of:\n80 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and\n10 % or more but not more than 20 % by weight of toluene (CAS RN 108-88-3)\n0 %\n31.12.2018\nex 3824 90 97\n81\nN-(2-phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)\n0 %\n31.12.2018\nex 3824 90 97\n83\nC6-24 and C16-18-unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5)\n0 %\n31.12.2018\nex 3824 90 97\nex 3906 90 90\n85\n87\nAqueous solution of polymers and ammonia consisting of:\n0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6) and\n0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid)\n0 %\n31.12.2018\nex 3901 10 10\n10\nLinear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with\n5 % or less by weight of comonomer,\na melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and\na density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3\n0 %\n31.12.2018\nex 3901 90 90\n30\nLinear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with\nmore than 5 %, but not more than 8 % by weight of comonomer,\na melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and\na density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3\n0 %\n31.12.2018\nex 3901 90 90\n40\nCopolymer of ethylene and 1-hexene only (CAS RN 25213-02-9):\ncontaining more than 5 % but not more than 20 % by weight of 1-hexene,\nof a specific gravity of not more than 0,93,\nmanufactured using a metallocene catalyst\n0 %\n31.12.2018\n*ex 3902 90 90\n94\nChlorinated polyolefins, whether or not in a solution or dispersion\n0 %\n31.12.2018\n*ex 3907 30 00\n60\nPolyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)\n0 %\n31.12.2017\n*ex 3907 40 00\n30\nPolycarbonate pellets or granules with a specific gravity of 1,18 or more but not more than 1,25, containing by weight:\n77 % or more but not more than 90 % of polycarbonate,\n8 % or more but not more than 20 % of phosphoric acid ester,\n0,1 % or more but not more than 1 % of antioxidant, and\nwhether or not containing 1 % or more but not more than 5 % of flame retardant\n0 %\n31.12.2016\nex 3907 60 80\n60\nOxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups\n0 %\n31.12.2018\n*ex 3910 00 00\n40\nSilicones of a kind used in the manufacture of long term surgical implants\n0 %\n31.12.2016\n*ex 3913 90 00\n85\nSterile sodium hyaluronate (CAS RN 9067-32-7)\n0 %\n31.12.2018\nex 3919 90 00\n67\nSelf-adhesive plastic film consisting of:\na poly(olefin) layer with a thickness of more than 95 but not more than 110 microns\nan adhesive layer with a thickness of more than 5 but not more than 15 microns\na layer based on epoxy resin, with a thickness of more than 4 but not more than 100 microns\na liner consisting of poly(ethylene terephthalate) with a thickness of more than 35 but not more than 40 microns\n0 %\n31.12.2018\nex 3921 90 10\n30\nMultilayer film consisting of:\na poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,\na primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,\nan adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,\nand a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm\n0 %\n31.12.2018\n*ex 3921 90 55\n*ex 7019 40 00\n*ex 7019 40 00\n25\n21\n29\nPrepreg sheets or rolls containing polyimide resin\n0 %\n31.12.2014\nex 3926 90 97\n50\nKnob of car radio front panel, made of Bisphenol A-based polycarbonate\n0 %\n31.12.2018\nex 4408 39 30\n10\nOkoumé veneer sheets of a thickness not exceeding 6 mm, unsanded, unplaned, of a kind used in plywood manufacture\n0 %\n31.12.2018\n*ex 5603 12 90\n*ex 5603 13 90\n60\n60\nNon-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)\n0 %\n31.12.2018\nex 5603 93 90\n60\nNonwovens made of polyester fibres,\nwith a weight of 85 g/m2,\nwith a constant thickness of 95 μm (± 5 μm),\nneither coated nor covered,\nin 1 m wide rolls of 2 000m to 5 000 m length,\nsuitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters\n0 %\n31.12.2018\nex 6909 19 00\n25\nCeramic proppants, containing aluminium oxide, silicon oxide and iron oxide\n0 %\n31.12.2018\n*ex 6909 19 00\n80\nCeramic heat sinks, containing by weight:\n66 % or more of silicon carbide,\n10 % or more of aluminium oxide\nfor maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 or 8528\n0 %\n31.12.2016\n*ex 7019 40 00\n*ex 7019 40 00\n11\n19\nWoven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:\n10ppm per°C or more but not more than 12ppm per°C in the length and width, and\n20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)\n0 %\n31.12.2018\n*ex 7020 00 10\n*ex 7616 99 90\n10\n77\nTelevision pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body\n0 %\n31.12.2016\nex 7608 20 89\n30\nSeamless aluminium alloyed extruded tubes with:\nan outer diameter of 60 mm or more but not more than 420 mm, and\na wall thickness of 10 mm or more but not more than 80 mm\n0 %\n31.12.2018\n*ex 8309 90 90\n10\nAluminium can ends:\nwith a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm),\nwhether or not with a ‘ring-pull’ aperture\n0 %\n31.12.2018\nex 8414 30 81\nex 8414 80 73\n60\n30\nHermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:\ndriven by ‘on-off' single phase alternate current’ (AC) or ‘brushless direct current’ (BLDC) variable speed motors\nwith a nominal power rating of not more than 1,5 kW\nof a kind used in the production of household heat pump laundry tumble dryers\n0 %\n31.12.2018\nex 8431 20 00\n40\nAluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427\n0 %\n31.12.2018\nex 8475 29 00\nex 8514 10 80\n10\n10\nGlass Filament Melter with heater basket/bushing assembly:\nelectrically heated,\nwith opening\nwith a multiplicity of tips (holes) of platinum/rhodium alloy\nused to melt glass batches and condition molten glass\nfor drawing into continuous fibres\n0 %\n31.12.2018\nex 8501 10 99\n70\nDC stepping motor, with\nan angle of step of 7,5° (± 0,5°)\na two-phase winding,\na rated voltage of 9 V or more, but not more than 16,0 V\nof a specified temperature range covering at least – 40 °C to + 105 °C\nwith or without connecting pinion\nwith or without motor drive connector\n0 %\n31.12.2018\n*ex 8501 10 99\n80\nDC stepping motor, with:\nan angle of step of 7,5° (± 0,5°),\na pull-out torque at 25 °C of 25 mNm or more,\na pull-out pulse rate of 1 500 pps or more,\na two-phase winding, and\na rated voltage of 10,5 V or more, but not more than 16,0 V\n0 %\n31.12.2018\nex 8503 00 99\n50\nStator for brushless motor, with:\nan internal diameter of 206,6 mm (± 0,5)\nan external diameter of 265,0 mm (± 0,2) and\na width of 41,00 mm (± 0,3)\nof a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums\n0 %\n31.12.2018\nex 8504 40 90\n70\nModule for converting alternating current into direct current and direct current into direct current with\na rated power of not more than 100 W\nan input voltage of 80 V or more, but not more than 305 V\nan certified input frequency of 47 Hz or more, but not more than 440 Hz\none or more constant voltage output(s)\nan operating temperature range of – 40 °C or more, but not more than + 85 °C,\npins for mounting to a printed circuit\n0 %\n31.12.2018\n*ex 8505 11 00\n70\nDisc consisting of an alloy of neodymium, iron and boron, covered with nickel, that after magnetisation is intended to become permanent magnet\nwhether or not containing a hole in the centre,\nwith a diameter of not more than 90 mm,\nof a kind used in car loudspeakers\n0 %\n31.12.2018\nex 8507 10 20\n85\nLead-acid accumulators or -modules, of a kind used for starting piston engines with\na nominal capacity of 32 Ah,\na length of not more than 205 mm,\na width of not more than 130 mm and\na height of not more than 190 mm\nfor use in the manufacture of articles of CN-code 8711\n0 %\n31.12.2018\n*ex 8507 30 20\n30\nCylindrical nickel-cadmium accumulator or module, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries\n0 %\n31.12.2018\n*ex 8507 50 00\n*ex 8507 60 00\n20\n20\nRectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries\n0 %\n31.12.2018\n*ex 8507 50 00\n30\nCylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries\n0 %\n31.12.2018\n*ex 8507 60 00\n30\nCylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries\n0 %\n31.12.2014\n*ex 8507 60 00\n40\nBatteries of ion-lithium electric accumulators or module rechargeable with:\na length of 1 203 mm or more, but not more than 1 297 mm,\na width of 282 mm or more, but not more than 772 mm,\na height of 792 mm or more, but not more than 839 mm,\na weight of 260 kg or more, but not more than 293 kg,\npower of 22 kWh or 26 kWh, and\nconstituted of 24 or 48 modules\n0 %\n31.12.2017\n*ex 8507 60 00\n50\nModules for the assembly of batteries of ion lithium electric accumulators with:\na length of 298 mm or more, but not more than 408 mm,\na width of 33,5 mm or more, but not more than 209 mm,\na height of 138 mm or more, but not more than 228 mm,\na weight of 3,6 kg or more, but not more than 17 kg, and\na power of 458 Wh or more, but not more than 2 158 Wh\n0 %\n31.12.2018\n*ex 8507 60 00\n55\nLithium-ion accumulator or module in cylindrical form, with:\na base similar to an ellipse squeezed in the middle,\na length of 49 mm or more (not including terminals),\na width of 33,5 mm or more,\na thickness of 9,9 mm or more,\na rated capacity of 1,75 Ah or more, and\na rated voltage of 3,7 V,\nfor the manufacture of rechargeable batteries\n0 %\n31.12.2017\n*ex 8507 60 00\n57\nLithium-ion accumulator or module, cuboid in shape, with:\nsome of the corners rounded off,\na length of 76 mm or more (not including terminals),\na width of 54,5 mm or more,\na thickness of 5,2 mm or more,\na rated capacity of 3 100 mAh or more, and\na rated voltage of 3,7 V,\nfor the manufacture of rechargeable batteries\n0 %\n31.12.2017\n*ex 8507 60 00\n80\nRectangular lithium-ion-accumulator or module, with\na metal casing,\na length of 171 mm (± 3 mm),\na width of 45,5 mm (± 1 mm),\na height of 115 mm (± 1 mm),\na nominal voltage of 3,75 V and\na nominal capacity of 50 Ah\nfor use in the manufacture of rechargeable batteries for motor vehicles\n0 %\n31.12.2015\n*ex 8518 29 95\n30\nLoudspeakers of:\nan impedance of 3 Ohm or more, but not more than 16 Ohm,\na nominal power of 2 W or more, but not more than 20 W,\nwith or without plastic bracket, and\nwith or without electric cable fitted with connectors,\nof a kind used for TV sets and video monitors manufacture as well as home entertainment systems\n0 %\n31.12.2017\n*ex 8522 90 80\n97\nTuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521\n0 %\n31.12.2016\n*ex 8525 80 19\n*ex 8525 80 91\n31\n10\nClosed circuit television (CCTV) camera:\nof a weight of not more than 5,9 kg,\nwithout a housing,\nof dimensions of not more than 405 mm × 315 mm,\nwith a single Charge-Couple-Device (CCD) or Complementary Metal–Oxide–Semiconductor (CMOS) sensor,\nwith effective pixels of not more than 5 megapixels,\nfor use in CCTV surveillance systems\n0 %\n31.12.2018\nex 8525 80 19\n50\nRemote camera head, whether or not contained in a housing\nwith dimensions (without cable socket) of not more than 27 × 30 × 38,5 mm (widthxheightxlength),\nwith three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors,\nwith a C-Mount lens mount,\nwith a weight of not more than 70 g,\nwith an LVDS digital video output,\nwith a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensation\nof a kind used in the manufacture of miniaturised industrial camera systems\n0 %\n31.12.2018\nex 8525 80 19\n55\nCamera module with a resolution of 1 920 × 1 080 P HD with two microphones for use in the manufacture of products falling within heading 8528\n0 %\n31.12.2018\n*ex 8528 59 70\n10\nLiquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,\nwithout a housing, with back cover and mounting frame,\nor with a housing,\nused for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94\n0 %\n31.12.2018\n*ex 8529 90 65\n50\nTuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528\n0 %\n31.12.2016\n*ex 8529 90 92\n42\nAluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528\n0 %\n31.12.2018\n*ex 8529 90 92\n*ex 8548 90 90\n44\n55\nLCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only\n0 %\n31.12.2018\nex 8536 41 90\n30\nA cubic-shape power relay with:\nan electromechanical switching function,\nan electrification current of 3 amperes or more but not more than 16 amperes,\na driver voltage 5 volts or more but not more than 24 volts,\na distance between switching pins not more than 12,5 mm\n0 %\n31.12.2018\n*ex 8536 70 00\n10\nOptical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528\n0 %\n31.12.2016\nex 8537 10 91\n40\nElectronic control units, manufactured according to class 2 of IPC-A-610E standard, with a main power input of 400 V AC, a logic power input of 24 V DC, equipped at least with:\na PCBA board(s) with logic and programmable circuits and other electronic parts as connectors, capacitors, coils or resistors,\ncontactors,\nan automatic circuit breaker,\na fuse,\ninternal connecting cables,\na main power switch,\nelectrical connectors or cables for connecting external devices,\na metal casing with dimension of 370 × 300 × 80 mm or more, but not more than 570 × 420 × 125 mm,\nused for controlling and powering machines of a kind used for recycling or sorting of plastic, metal or glass packaging\n0 %\n31.12.2018\nex 8537 10 99\n30\nMotor bridge ICs without programmable memory consisting of:\none or more integrated circuits, not interconnected, on separate lead frames,\nalso with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars\nmounted in a plastic housing\n0 %\n31.12.2018\n*ex 8538 90 99\n95\nCopper base plate, of a kind used as a heatsink [in the manufacture] of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1 200 V\n0 %\n31.12.2018\nex 8544 30 00\n30\nMulti-measurement wire harness of a voltage of 5 V or more but not more than 90 V capable of measuring some or all of the following;\na travel speed of not more than 24 km/h\na motor speed of not more than 4 500 rpm\nhydraulic pressure of not more than 25 Mpa\nmass of not more than 50 metric tonnes\nfor use in the manufacture of vehicles of heading 8427\n0 %\n31.12.2018\nex 8714 91 10\nex 8714 91 10\nex 8714 91 10\n23\n33\n70\nFrame, constructed from aluminium or aluminium and carbon, for the use in the manufacture of bicycles\n0 %\n31.12.2018\nex 8714 91 30\nex 8714 91 30\nex 8714 91 30\n23\n33\n70\nFront forks, suspended, constructed from aluminium, for use in the manufacture of bicycles\n0 %\n31.12.2018\n*ex 9002 11 00\n50\nLens unit:\nhaving a focal length of 25 mm or more but not more than 150 mm,\nconsisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm\n0 %\n31.12.2018\nex 9014 10 00\n30\nElectronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly, with the following main components:\na combination of one or more application-specific integrated circuits (ASIC), and\none or more micro-electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,\nof a kind used in the manufacture of products falling in chapters 84-90 and 94\n0 %\n31.12.2018\n*ex 9022 90 00\n10\nPanels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, or coated with a layer of amorphous selenium\n0 %\n31.12.2018\n*ex 9405 40 39\n*ex 9405 40 99\n80\n07\nAmbient light LED board to be incorporated in goods of heading 8528\n0 %\n31.12.2015",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "X",
      "label": "X1",
      "text": "Substituted by Corrigendum to Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (Official Journal of the European Union L 192 of 1 July 2014)."
    },
    {
      "type": "footnote",
      "label": "f1",
      "text": "Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2014/722/annex/I",
    "retrieved_at": "2026-11-01T14:47:28.901909+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}