Division 1 In Annex III, point 1.2 (B) the last paragraph is replaced by the following:

‘High pressure sodium lamps with lamp efficacy requirements shall have at least the lamp lumen maintenance factors and lamp survival factors in Table 13:

Table 13

Lamp lumen maintenance factors & lamp survival factors for high pressure sodium lamps — Stage 2

High pressure sodium lamp category and burning hours for measurement		Lamp lumen maintenance factor	Lamp survival factor
P ≤ 75 W LLMF and LSF measured at 12 000 burning hours	Ra ≤ 60	> 0,80	> 0,90
	Ra > 60	> 0,75	> 0,75
	all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast	> 0,75	> 0,80
P > 75 W ≤ 605 W LLMF and LSF measured at 16 000 burning hours	Ra ≤ 60	> 0,85	> 0,90
	Ra > 60	> 0,70	> 0,65
	all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast	> 0,75	> 0,55

The requirements in Table 13 for retrofit lamps designed to operate on high pressure mercury vapour lamp ballast shall be applicable until 6 years after the entry into force of this Regulation.’