# Council Regulation (EU) 2015/2448 of 14 December 2015 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

EU Regulation 2015/2448 · adopted 14 December 2015

Council Regulation (EU) 2015/2448 of 14 December 2015 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

## Introductory text

Council Regulation (EU) 2015/2448
of 14 December 2015
amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1)
In order to ensure sufficient and uninterrupted supply of certain goods insufficiently produced in the Union and to avoid any disturbances on the market for certain agricultural and industrial products, autonomous tariff quotas have been opened by Council Regulation (EU) No 1388/2013. Products within those tariff quotas can be imported into the Union at reduced or zero duty rates. For the reasons indicated, it is necessary to open, with effect from 1 January 2016, tariff quotas at zero duty rates for an appropriate volume as regards 10 additional products.
(2)
In certain cases, the existing autonomous tariff quotas of the Union should be adapted. In the case of three products, the TARIC codes should be changed in view of classification changes in the Combined Nomenclature. For two products, it is necessary to amend the product description for clarification purposes and in order to take into account the most recent product developments. In the case of five products, in the interest of economic operators of the Union, the quota volumes should be increased and in one case the quota volume should be decreased. For reasons of clarity, a footnote relating to one product should be deleted.
(3)
In the case of two products, the autonomous tariff quota of the Union should be closed with effect from 1 January 2016 as it is not in the Union's interest to continue granting it as from that date.
(4)
Due to the number of amendments to be made in the Annex to Regulation (EU) No 1388/2013, in the interest of clarity and rationality, that Annex should be replaced.
(5)
Regulation (EU) No 1388/2013 should therefore be amended accordingly.
(6)
Since the amendments pursuant to this Regulation should take effect from 1 January 2016, this Regulation should apply from that date,
HAS ADOPTED THIS REGULATION:

## 1 

The Annex to Regulation (EU) No 1388/2013 is replaced by the text set out in the Annex to this Regulation.

## 2 

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2016.

## Signature

This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 14 December 2015.
For the Council
The President
F. Etgen

## 

‘ANNEX
Suspension of duties is subject to end-use customs supervision in accordance with Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1).
However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.
Only the ad valorem duty is suspended. The specific duty shall continue to apply.
A newly introduced measure or a measure with amended conditions.’.
Order number
CN code
TARIC
Description
Quota period
Quota volume
Quota duty
09.2637
ex 0710 40 00
ex 2005 80 00
10
20
Corn from corn cobs (Zea Mays Saccharata) with a diameter of 10 mm or more, but not more than 20 mm, husked, sorted, trimmed, washed, blanched, either cooled and individually quick-frozen, or prepared or preserved otherwise than by vinegar or acetic acid, not frozen for use in the manufacture of products of the food industry for treatment other than simple repacking
1.1.-31.12.
550 tonnes
0 %
09.2849
ex 0710 80 69
10
Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals
1.1.-31.12.
700 tonnes
0 %
09.2664
ex 2008 60 39
30
Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products
1.1.-31.12.
1 000 tonnes
10 %
09.2913
ex 2401 10 35
ex 2401 10 70
ex 2401 10 95
ex 2401 10 95
ex 2401 10 95
ex 2401 20 35
ex 2401 20 70
ex 2401 20 95
ex 2401 20 95
ex 2401 20 95
91
10
11
21
91
91
10
11
21
91
Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than Euro 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
1.1.-31.12.
6 000 tonnes
0 %
09.2928
ex 2811 22 00
40
Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide
1.1.-31.12.
1 700 tonnes
0 %
09.2703
ex 2825 30 00
10
Vanadium oxides and hydroxides exclusively for use in alloys
1.1.-31.12.
13 000 tonnes
0 %
09.2806
ex 2825 90 40
30
Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)
1.1.-31.12.
12 000 tonnes
0 %
09.2929
2903 22 00
Trichloroethylene (CAS RN 79-01-6)
1.1.-31.12.
10 000 tonnes
0 %
09.2837
ex 2903 79 30
20
Bromochloromethane (CAS RN 74-97-5)
1.1.-31.12.
600 tonnes
0 %
09.2933
ex 2903 99 90
30
1,3-Dichlorobenzene (CAS RN 541-73-1)
1.1.-31.12.
2 600 tonnes
0 %
09.2830
ex 2906 19 00
40
Cyclopropylmethanol (CAS RN 2516-33-8)
1.1.-31.12.
20 tonnes
0 %
09.2851
ex 2907 12 00
10
O-Cresol having a purity of not less than 98,5 % by weight (CAS RN 95-48-7)
1.1.-31.12.
20 000 tonnes
0 %
09.2624
2912 42 00
Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4)
1.1.-31.12.
950 tonnes
0 %
09.2683
ex 2914 19 90
50
Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form
1.1.-31.12.
100 tonnes
0 %
09.2852
ex 2914 29 00
60
Cyclopropyl methyl ketone (CAS RN 765-43-5)
1.1.-31.12.
300 tonnes
0 %
09.2638
ex 2915 21 00
10
Acetic acid of a purity by weight of 99 % or more (CAS RN 64-19-7)
1.1.-31.12.
1 000 000 tonnes
0 %
09.2972
2915 24 00
Acetic anhydride (CAS RN 108-24-7)
1.1.-31.12.
50 000 tonnes
0 %
09.2679
2915 32 00
Vinyl acetate (CAS RN 108-05-4)
1.1.-31.12.
200 000 tonnes
0 %
09.2665
ex 2916 19 95
30
Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)
1.1.-31.12.
8 250 tonnes
0 %
09.2684
ex 2916 39 90
28
2,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)
1.1.-31.12.
250 tonnes
0 %
09.2769
ex 2917 13 90
10
Dimethyl sebacate (CAS RN 106-79-6)
1.1.-31.12.
1 000 tonnes
0 %
09.2680
ex 2917 19 80
25
n-Dodecenlylsuccinic acid anhydride (CAS RN 19780-11-1) with:
a Gardner colour index level of not more than 1,
a transmission at 500 nm of 98 % or more for a 10 % solution by weight in toluene,
for use in the manufacture of automotive coatings
1.1.-31.12.
80 tonnes
0 %
09.2634
ex 2917 19 80
40
Dodecanedioic acid, of a purity by weight of more than 98,5 % (CAS RN 693-23-2)
1.1.-31.12.
4 600 tonnes
0 %
09.2808
ex 2918 22 00
10
o-Acetylsalicylic acid (CAS RN 50-78-2)
1.1.-31.12.
120 tonnes
0 %
09.2646
ex 2918 29 00
55
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with:
a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight and
a melting point of 110 °C or more, but not more than 125 °C,
for use in the manufacture of PVC-processing stabilizer-one packs based on powder mixtures
1.1.-31.12.
80 tonnes
0 %
09.2647
ex 2918 29 00
65
Pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8):
with a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and
a melting point of 49 °C or more, but not more than 54 °C,
for use in the manufacture of PVC-processing stabilizer-one packs based on powder mixtures
1.1.-31.12.
380 tonnes
0 %
09.2975
ex 2918 30 00
10
Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5)
1.1.-31.12.
1 000 tonnes
0 %
09.2648
ex 2920 90 10
70
Dimethyl Sulphate (CAS RN 77-78-1)
1.1.-31.12.
12 000 tonnes
0 %
09.2688
ex 2920 90 85
70
Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)
1.1.-31.12
6 000 tonnes
0 %
09.2649
ex 2921 29 00
60
Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)
1.1.-31.12.
1 700 tonnes
0 %
09.2682
ex 2921 41 00
10
Aniline with a purity by weight of 99 % or more (CAS RN 62-53-3)
1.1.-31.12.
50 000 tonnes
0 %
09.2602
ex 2921 51 19
10
o-Phenylenediamine (CAS RN 95-54-5)
1.1.-31.12.
1 800 tonnes
0 %
09.2854
ex 2924 19 00
85
3-Iodoprop-2-ynyl N-butylcarbamate (CAS RN 55406-53-6)
1.1.-31.12
500 tonnes
0 %
09.2977
2926 10 00
Acrylonitrile (CAS RN 107-13-1)
1.1.-31.12.
35 000 tonnes
0 %
09.2856
ex 2926 90 95
84
2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)
1.1.-31.12.
900 tonnes
0 %
09.2838
ex 2927 00 00
85
C,C'-Azodi(formamide) (CAS RN 123-77-3) with:
a pH of 6,5 or more but not more than 7,5, and
a semicarbazide (CAS RN 57-56-7) content of not more than 1 500 mg/kg as determined by liquid chromatography mass spectrometry (LC-MS),
decomposition temperature range of 195 °C – 205 °C,
specific gravity 1,64-1,66, and
combustion heat 215-220 Kcal/mol
1.1.-31.12.
100 tonnes
0 %
09.2685
ex 2929 90 00
30
Nitroguanidine (CAS RN 556-88-7)
1.1.-31.12
6 500 tonnes
0 %
09.2955
ex 2932 19 00
60
Flurtamone (ISO) (CAS RN 96525-23-4)
1.1.-31.12.
300 tonnes
0 %
09.2812
ex 2932 20 90
77
Hexan-6-olide (CAS RN 502-44-3)
1.1.-31.12.
4 000 tonnes
0 %
09.2858
2932 93 00
Piperonal (CAS RN 120-57-0)
1.1.-31.12.
220 tonnes
0 %
09.2831
ex 2932 99 00
40
1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)
1.1.-31.12.
500 tonnes
0 %
09.2673
ex 2933 39 99
43
2,2,6,6-tetramethylpiperidin-4-ol (CAS RN 2403-88-5)
1.1.-31.12.
1 000 tonnes
0 %
09.2674
ex 2933 39 99
44
Chlorpyrifos (ISO) (CAS RN 2921-88-2)
1.1.-31.12.
9 000 tonnes
0 %
09.2860
ex 2933 69 80
30
1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)
1.1.-31.12.
400 tonnes
0 %
09.2658
ex 2933 99 80
73
5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)
1.1.-31.12.
200 tonnes
0 %
09.2675
ex 2935 00 90
79
4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)
1.1.-31.12.
1 000 tonnes
0 %
09.2945
ex 2940 00 00
20
D-Xylose (CAS RN 58-86-6)
1.1.-31.12.
400 tonnes
0 %
09.2686
ex 3204 11 00
75
Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight
1.1.-31.12
2 500 kg
0 %
09.2676
ex 3204 17 00
14
Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more by weight
1.1.-31.12.
50 tonnes
0 %
09.2666
ex 3204 17 00
55
Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight
1.1.-31.12.
40 tonnes
0 %
09.2659
ex 3802 90 00
19
Soda flux calcinated diatomaceous earth
1.1.-31.12.
30 000 tonnes
0 %
09.2908
ex 3804 00 00
10
Sodium lignosulphonate
1.1.-31.12.
40 000 tonnes
0 %
09.2889
3805 10 90
Sulphate turpentine
1.1.-31.12.
25 000 tonnes
0 %
09.2935
ex 3806 10 00
10
Rosin and resin acids obtained from fresh oleoresins
1.1.-31.12.
280 000 tonnes
0 %
09.2832
ex 3808 92 90
40
Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion
1.1.-31.12.
500 tonnes
0 %
09.2681
ex 3812 10 00
ex 3824 90 92
20
85
Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)
1.1.-31.12.
9 000 tonnes
0 %
09.2814
ex 3815 90 90
76
Catalyst consisting of titanium dioxide and tungsten trioxide
1.1.-31.12.
3 000 tonnes
0 %
09.2644
ex 3824 90 92
77
Preparation containing by weight:
55 % or more but not more than 78 % of dimethyl glutarate,
10 % or more but not more than 30 % of dimethyl adipate, and
not more than 35 % of dimethyl succinate
1.1.-31.12.
10 000 tonnes
0 %
09.2140
ex 3824 90 92
79
Mixture of tertiary amines containing by weight:
2,0-4,0 % of N,N-dimethyl-1-octanamine
94 % minimum of N,N-dimethyl-1-decanamine
2 % maximum of N,N-dimethyl-1-dodecanamine
1.1.-31.12.
4 500 tonnes
0 %
09.2650
ex 3824 90 92
87
Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 %
1.1.-31.12.
2 000 tonnes
0 %
09.2829
ex 3824 90 93
43
Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics:
a resin acid content not exceeding 30 % by weight,
an acid number not exceeding 110,
and
a melting point of 100 °C or more
1.1.-31.12.
1 600 tonnes
0 %
09.2907
ex 3824 90 93
67
Mixture of phytosterols, in the form of powder, containing by weight:
75 % or more of sterols,
not more than 25 % of stanols,
for use in the manufacture of stanols/sterols or stanol/sterol esters
1.1.-31.12.
2 500 tonnes
0 %
09.2660
ex 3902 30 00
98
Amorphous polyalpha olefin adhesive for the manufacture of hygiene products
1.1.-31.12.
500 tonnes
0 %
09.2639
3905 30 00
Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
1.1.-31.12.
15 000 tonnes
0 %
09.2671
ex 3905 99 90
81
Poly(vinyl butyral)(CAS RN 63148-65-2):
containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and
with a median particle size (D50) of more than 0,6 mm
1.1.-31.12.
12 000 tonnes
0 %
09.2687
ex 3907 40 00
25
Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)
1.1.-31.12
400 tonnes
0 %
09.2616
ex 3910 00 00
30
Polydimethylsiloxane with a degree of polymerisation of 2 800 monomer units (± 100)
1.1.-31.12.
1 300 tonnes
0 %
09.2816
ex 3912 11 00
20
Cellulose acetate flakes
1.1.-31.12.
75 000 tonnes
0 %
09.2864
ex 3913 10 00
10
Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3)
1.1.-31.12.
1 000 tonnes
0 %
09.2641
ex 3913 90 00
87
Sodium hyaluronate, non sterile, with:
a weight average molecular weight (Mw) of not more than 900 000,
an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,
an ethanol content of not more than 1 % by weight,
an isopropanol content of not more than 0,5 % by weight
1.1.-31.12.
200 kg
0 %
09.2661
ex 3920 51 00
50
Sheets of polymethylmethacrylate conforming to standards:
EN 4364 (MIL-P-5425E) and DTD5592A, or
EN 4365 (MIL-P-8184) and DTD5592A
1.1.-31.12.
100 tonnes
0 %
09.2645
ex 3921 14 00
20
Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)
1.1.-31.12.
1 700 tonnes
0 %
09.2818
ex 6902 90 00
10
Refractory bricks with:
an edge length of more than 300 mm, and
a TiO2 content of not more than 1 % by weight, and
a Al2O3 content of not more than 0,4 % by weight, and
a change in volume of less than 9 % at 1 700 °C
1.1.-31.12.
225 tonnes
0 %
09.2628
ex 7019 52 00
10
Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames
1.1.-31.12.
3 000 000 m2
0 %
09.2799
ex 7202 49 90
10
Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium
1.1.-31.12.
50 000 tonnes
0 %
09.2652
ex 7409 11 00
ex 7410 11 00
20
30
Refined copper foil and strips, electrolytically coated
1.1.-31.12.
1 020 tonnes
0 %
09.2662
ex 7410 21 00
55
Plates:
consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,
with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
with a comparative tracking index (CTI) of 600 or more
1.1.-31.12.
45 000 m2
0 %
09.2834
ex 7604 29 10
20
Aluminium alloy rods with a diameter of 200 mm or more, but not exceeding 300 mm
1.1.-31.12.
2 000 tonnes
0 %
09.2835
ex 7604 29 10
30
Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm
1.1.-31.12.
1 000 tonnes
0 %
09.2689
ex 7606 12 92
ex 7607 11 90
50
70
Aluminium and magnesium alloy strip or foil:
in rolls,
of a thickness of 0,14 mm or more but not more than 0,27 mm,
a width of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50 mm or 356 mm,
a tensile strength of 285 N/mm2 or more,
and
an elongation at break of 1 % or more, and
containing by weight:
93,3 % or more of aluminium,
0,8 % or more but not more than 5 % of magnesium, and
not more than 1,8 % of other elements
1.1.-30.6
500 tonnes
0 %
09.2840
ex 8104 30 00
20
Magnesium powder:
of purity by weight of 98 % or more, but not more than 99,5 %
with a particle size of 0,2 mm or more but not more than 0,8 mm
1.1.-31.12.
2 000 tonnes
0 %
09.2629
ex 8302 49 00
91
Aluminium telescopic handle for use in the manufacture of luggage
1.1.-31.12.
1 000 000 pieces
0 %
09.2690
ex 8483 30 80
20
Wave slide bearing for axial applications, of FeP01 steel (according to EN 10130-1991) with a sliding layer of porous sinter bronze and poly(tetrafluoroethylene), suitable for installation into motor bike suspension units
1.1.-31.12.
1 500 000 pieces
0 %
09.2642
ex 8501 40 20
ex 8501 40 80
30
40
Assembly, consisting of:
a single-phase electric AC commutator motor, with an output of 480 W or more, but not more than 1 400 W, an input power of more than 900 W but not more than 1 600 W, an external diameter of more than 119,8 mm but not more than 135,2 mm and a rated speed of more than 30 000 rpm but not more than 50 000 rpm, and
an air-inducting ventilator,
for use in the manufacture of vacuum cleaners
1.1.-31.12.
120 000 pieces
0 %
09.2763
ex 8501 40 20
ex 8501 40 80
40
30
Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners
1.1.-31.12.
2 000 000 pieces
0 %
09.2633
ex 8504 40 82
20
Electric rectifier, with a capacity of not more than 1 kVA, for use in the manufacture of appliances falling within subheading 8509 80 and heading 8510
1.1.-31.12.
4 500 000 pieces
0 %
09.2643
ex 8504 40 82
30
Power supply boards for use in the manufacture of goods falling under heading 8521 and 8528
1.1.-31.12.
1 038 000 pieces
0 %
09.2620
ex 8526 91 20
20
Assembly for GPS system having a position determination function, without display, and a weight of not more than 2 500 g
1.1.-31.12.
3 000 000 pieces
0 %
09.2672
ex 8529 90 92
ex 9405 40 39
75
70
Printed circuit board with LED diodes:
whether or not equipped with prisms/lens, and
whether or not fitted with connector(s)
for the manufacture of backlight units for goods of heading 8528
1.1.-31.12.
115 000 000 pieces
0 %
09.2003
ex 8543 70 90
63
Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm x 30 mm
1.1.-31.12.
1 400 000 pieces
0 %
09.2668
ex 8714 91 10
ex 8714 91 10
21
31
Bicycle frame, constructed from carbon fibres and artificial resin, painted, lacquered and/or polished, for use in the manufacture of bicycles
1.1.-31.12.
304 000 pieces
0 %
09.2669
ex 8714 91 30
ex 8714 91 30
21
31
Bicycle front fork, constructed from carbon fibres and artificial resin, painted, lacquered and/or polished, for use in the manufacture of bicycles
1.1.-31.12.
257 000 pieces
0 %
09.2631
ex 9001 90 00
80
Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 9013 10 and 9015
1.1.-31.12.
5 000 000 pieces
0 %
09.2836
ex 9003 11 00
ex 9003 19 00
10
20
Spectacle frames of plastic or base metal for use in the manufacture of corrective glasses
1.1.-31.12.
5 800 000 pieces
0 %

---
Source: https://www.legislation.gov.uk/eur/2015/2448 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-2448
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.