# Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance), Appendix 12

Extent: E+W+S+N.I.

Model information document relating to EU type-approval of a lateral and/or rear protective structure as a component/STU
A.
GENERAL INFORMATION
2.
GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
2.1.
Make(s) (trade name(s) of manufacturer): …
2.2.
Type ( 6 ): …
2.2.1.
Commercial name(s) (if available): …
2.2.2.
Type-approval number(s) (49) (if available): …
2.2.3.
Type-approval(s) issued on (date, if available): …
2.2.4.
For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) ( 19 ): …
2.3.
Company name and address of manufacturer: …
2.3.1.
Name(s) and address(es) of assembly/manufacture plants: …
2.3.2.
Name and address of manufacturer's authorised representative (if any): …
2.4.
For systems and separate technical units, vehicle(s) for which they are intended for (21):
2.4.1.
Type (17): …
2.4.2.
Variant(s) (17): …
2.4.3.
Version(s) (17): …
2.4.4.
Commercial name(s) (if available): …
2.4.5.
Category, subcategory and speed index of the vehicle (2): …
32.
LATERAL AND REAR PROTECTION
32.1.
Lateral protection
32.1.5.
In the case of lateral protection device(s), full description and/or drawing of such device(s) (including mountings and fittings): …
32.1.5.1.
Materials used: …
32.1.5.2.
Complete details of fittings required and full instructions, including torque requirements, for fitting: …
32.1.6.
Requirements under points 2 and 3 and Parts I, II and III of UNECE Regulation No 73 (OJ L 122, 8.5.2012, p. 1) are met with relevant documentation included in the information document: yes/no (4)
32.2.
Rear protective structure
32.2.4.
In case of a special device, full description and/or drawing of the rear protective structure (including mountings and fittings), or, if approved as separate technical unit, type-approval number: …
32.2.4.1.
Materials used: …
32.2.4.2.
Complete details of fittings required and full instructions, including torque requirements, for fitting: …

---
Source: https://www.legislation.gov.uk/eur/2015/504/annex/I/appendix/12 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-504/annex-I/appendix-12
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.