# Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance), Appendix 16

Extent: E+W+S+N.I.

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a driver's exposure to noise level system
A.
GENERAL INFORMATION
2.
GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
2.1.
Make(s) (trade name(s) of manufacturer): …
2.2.
Type ( 6 ): …
2.2.1.
Commercial name(s) (if available): …
2.2.2.
Type-approval number(s) (49) (if available): …
2.2.3.
Type-approval(s) issued on (date, if available): …
2.3.
Company name and address of manufacturer: …
2.3.1.
Name(s) and address(es) of assembly/manufacture plants: …
2.3.2.
Name and address of manufacturer's authorised representative (if any): …
2.4.
For systems and separate technical units, vehicle(s) for which they are intended for (21):
2.4.1.
Type (17): …
2.4.2.
Variant(s) (17): …
2.4.3.
Version(s) (17): …
2.4.4.
Commercial name(s) (if available): …
2.4.5.
Category, subcategory and speed index of the vehicle (2): …
2.5.
Location and method of attachment of the type-approval mark (19): …
6.
ESSENTIAL CHARACTERISTICS OF THE ENGINE
6.1.7.
Category and sub-category of the engine ( 7 ): …
6.2.1.
Combustion Cycle: four stroke cycle/two stroke cycle/rotary/other (specify) ( 4 ): …
6.2.2.
Ignition Type: Compression ignition/spark ignition ( 4 )
6.2.3.1.
Cylinders' number: … and configuration ( 26 ):
6.3.2.1.
Declared rated speed: … rpm
6.3.2.1.2.
Declared rated net power: … kW
6.3.2.2.
Maximum power speed: … rpm
6.3.2.2.2.
Maximum net power: … kW
6.3.6.4.
Engine total swept volume: … cm 3
11.
DRIVE-TRAIN AND CONTROL ( 13 )
11.1.
Brief description and schematic drawing of the vehicle drive-train and its control system (transmission ratio change system, clutch control or any other element of drive-train): …
11.2.
Transmission
11.2.1.
Brief description and schematic drawing of transmission ratio change system(s) and its control: …
11.2.2.
Diagram and or drawing of the power transmission: …
11.2.3.
Type of power transmission: Gear (including planetary gear sets) / belt / hydrostatic / electric / other ( 4 ) (if other, specify: …)
11.2.4.
Brief description of the electrical/electronic components (if any): …
11.2.5.
Location relative to the engine: …
11.2.6.
Method of control: …
11.2.7.
Transfer box: with/without ( 4 )
11.2.8.
Type of transmission ratio change system: Mechanical (gear change) / Double clutch (gear change) / Semi-automatic (gear change) / Automatic (gear change) / Continuously Variable Transmission/ hydrostatic / not applicable / other ( 4 ) (if other, specify: …)
11.3.
Clutch (if any)
11.3.1.
Brief description and schematic drawing of the clutch and its control system:
11.3.2.
Maximum torque conversion:
11.4.
Gear ratios
Continuously variable transmission
Gear
Internal gearbox ratios (ratios of engine to gearbox output shaft revolutions)
Internal transfer box ratios (ratios of engine to transfer box output shaft revolutions)
Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)
Total gear ratios
Ratio (engine speed/vehicle speed) for manual transmission only
Maximum for CVT
1
2
3
…
Minimum for CVT
Reverse
1
…
48.
DRIVER'S EXPOSURE TO NOISE LEVEL
48.1.
T- or C-category (with rubber tracks) vehicles to be tested in accordance with Test method 1, in accordance with point 2 of Annex XIII to Commission Delegated Regulation (EU) No 1322/2014: yes/no/not applicable (4)
48.2.
T- or C-category (with rubber tracks) vehicles to be tested in accordance with Test method 2, in accordance with point 3 of Annex XIII to Commission Delegated Regulation (EU) No 1322/2014: yes/no/not applicable (4)
48.3.
C-category vehicles with steel tracks to be tested on a layer of humid sand as specified by paragraph 5.3.2 of ISO 6395:2008 (Earth-moving machinery — Determination of sound power level — Dynamic test conditions): yes/no/not applicable (4)
48.4
Alternatively to entries 48.1 to 48.3, a complete test report issued on the basis of the OECD standard Code for the official measurement of noise at the driving position(s) on agricultural and forestry tractors, OECD Code 5, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (4)

---
Source: https://www.legislation.gov.uk/eur/2015/504/annex/I/appendix/16 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-504/annex-I/appendix-16
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.