# Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance), Appendix 6

Extent: E+W+S+N.I.

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an electro-magnetic compatibility system
A.
GENERAL INFORMATION
2.
GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
2.1.
Make(s) (trade name(s) of manufacturer): …
2.2.
Type ( 6 ): …
2.2.1.
Commercial name(s) (if available): …
2.2.2.
Type-approval number(s) (49) (if available): …
2.2.3.
Type-approval(s) issued on (date, if available): …
2.2.4.
For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (19): …
2.3.
Company name and address of manufacturer: …
2.3.1.
Name(s) and address(es) of assembly/manufacture plants: …
2.3.2.
Name and address of manufacturer's authorised representative (if any): …
2.4.
For systems and separate technical units, vehicle(s) for which they are intended for (21):
2.4.1.
Type (17): …
2.4.2.
Variant(s) (17): …
2.4.3.
Version(s) (17): …
2.4.4.
Commercial name(s) (if available): …
2.4.5.
Category, subcategory and speed index of the vehicle (2): …
24.
ELECTRO-MAGNETIC COMPATIBILITY (EMC)
24.1.
Schedule describing all projected combinations of relevant vehicle electrical/electronic systems or ESAs, body styles (60), variations in body material, general wiring arrangements, engine variations, left-hand/right-hand drive versions and wheelbase versions: …
24.2.
Requirements under UNECE Regulation No 10 (OJ L 254, 20.9.2012, p. 1) are met with the relevant documentation included in the information document: yes/no (4)
24.3.
Requirements under ISO 14982:1998 (Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria) are met with relevant documentation included in the information document: yes/no (4)
24.4.
Alternatively to entry 24.2 or entry 24.3, provide the following information:
24.4.1. Description and drawings/photographs of the shapes and constituent materials of the part of the body forming the engine compartment and adjacent parts of the passenger compartment: …
24.4.2. Drawings or photographs of the position of the metal components housed in the engine compartment (e.g. heating appliances, spare wheel, air filter, steering mechanism, etc.): …
24.4.3. Table or drawing of radio-interference control equipment: …
24.4.4. Particulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: …

---
Source: https://www.legislation.gov.uk/eur/2015/504/annex/I/appendix/6 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-504/annex-I/appendix-6
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.