# Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance), Appendix 2

Extent: E+W+S+N.I.

Examples of an EU type-approval mark for a separate technical unit or component
Figure 1
Example of EU type-approval mark of a roll-over protective structure (ROPS) (dynamic testing)
Explanatory note relating to figure 1:
The above EU type-approval mark was issued by Portugal under number 00024 for a roll-over protective structure (ROPS) (dynamic testing).
Explanatory notes relating to Annex IV
(Footnote markers, footnotes and explanatory notes not to be stated on the manufacturer's certificates):
(1)
Classified according to Article 4 of Regulation (EU) No 167/2013, the coding shall be indicated, e.g. ‘T4.3a’ for a low-clearance tractor with a maximum design speed below or equal to 40 km/h.
(2)
For R- and S-category vehicles fitted with a rear mechanical coupling, indicate the maximum permissible load(s) on the rear coupling point for towing a second R- or S-category vehicle for each chassis/braking configuration of the mentioned second vehicle.

---
Source: https://www.legislation.gov.uk/eur/2015/504/annex/IV/appendix/2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-504/annex-IV/appendix-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.