# Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance), Division 3.2

Extent: E+W+S+N.I.

Test reports issued under Directive 2003/37/EC, Regulation (EU) 2016/1628, Regulation (EC) No 595/2009, Directive 2007/46/EC or international regulations referred to in Chapter XIII of Regulation (EU) No 167/2013 and the delegated and implementing acts adopted pursuant to that Regulation shall be accepted for the purposes of type-approval under Regulation (EU) No 167/2013 for the following components and separate technical units under the conditions indicated in Table 8-1:
Table 8-1
Test reports of components and separate units that can be presented when applying for type-approvals under Regulation (EU) No 167/2013
Directive 2009/64/EC of the European Parliament and of the Council of 13 July 2009 on the suppression of radio interference produced by agricultural or forestry tractors (electromagnetic compatibility) (OJ L 216, 20.8.2009, p. 1).
Directive 2009/63/EC of the European Parliament and of the Council of 13 July 2009 on certain parts and characteristics of wheeled agricultural or forestry tractors (OJ L 241, 19.8.2009, p. 23).
Council Directive 89/297/EEC of 13 April 1989 on the approximation of the laws of the Member States relating to the lateral protection (side guards) of certain motor vehicles and their trailers (OJ L 124, 13.4.1989, p. 1).
Council Directive 70/221/EEC of 20 March 1970 on the approximation of the laws of the Member States relating to liquid fuel tanks and rear protective devices for motor vehicles and their trailers (OJ L 76, 6.4.1970, p. 23).
Commission Directive 2006/20/EC of 17 February 2006 amending, for the purposes of its adaptation to technical progress, Council Directive 70/221/EEC concerning fuel tanks and rear underrun protection of motor vehicles and their trailers (OJ L 48, 18.2.2006, p. 16).
Directive 2009/144/EC of the European Parliament and of the Council of 30 November 2009 on certain components and characteristics of wheeled agricultural or forestry tractors (OJ L 27, 30.1.2010, p. 33).
Commission Directive 2010/52/EU of 11 August 2010 amending, for the purposes of adaptation of their technical provisions, Council Directive 76/763/EEC relating to passenger seats for wheeled agricultural or forestry tractors and Directive 2009/144/EC of the European Parliament and of the Council on certain components and characteristics of wheeled agricultural or forestry tractors (OJ L 213, 13.8.2010, p. 37).
Council Directive 78/764/EEC of 25 July 1978 on the approximation of the laws of the Member States relating to the driver's seat on wheeled agricultural or forestry tractors (OJ L 255, 18.9.1978, p. 1).
Commission Directive 1999/57/EC of 7 June 1999 adapting to technical progress Council Directive 78/764/EEC relating to the driver's seat on wheeled agricultural or forestry tractors (OJ L 148, 15.6.1999, p. 35).
Component/STU
Conditions of acceptance
Component/STU: engine/engine family
Test report issued under Directive 2000/25 as last amended by Commission Directive 2014/43/EU;
Test report issued under Regulation EU 2016/1628; and
Test report issued under Regulation (EC) No 595/2009
Component / STU: electro-magnetic compatibility of electrical / electronic sub-assemblies
Test report issued under Directive 2009/64/EC of the European Parliament and of the Council , as far as the testing equipment has been updated in:
Radiated broadband and narrowband electromagnetic emissions from vehicles
Radiated broadband and narrowband electromagnetic emissions from electronic sub-assemblies
The measuring equipment and test site shall comply with the requirements of publication No 16-1 series of the International Special Committee on Radio Interference (CISPR):
Radiated broadband and narrowband electromagnetic emissions from vehicles
Antenna calibration may be according to the method described in CISPR publication No 12, Edition 6, Annex C, and
Test report issued under UNECE Regulation 10, 04 series of amendments, Corrigendum 1 to the Revision 4, supplement 1 to the 04 series of amendments ( OJ L 254, 20.9.2012, p. 1 .)
Component/STU: ballast masses
Test report issued under Directive 2009/63/EC
Component/STU: lateral and/or rear protective structure
Test report issued under Directive 89/297/EC (O3- and O4-category vehicles),
Test report issued under UNECE R73, 01 series of amendments (O3- and O4-category vehicles) (OJ L 122, 8.5.2012, p. 1), and
Test report issued under Directive 70/221/EEC, as amended by Commission Directive 2006/20/EC (O-category vehicles)
Component/STU: mechanical coupling
Test report issued under Directive 2009/144/EC:
Dynamic or Static test method only accepted for vehicles with ‘a’ speed index: maximum design speed not exceeding 40 km/h.
Dynamic test method accepted for vehicles with ‘b’ speed index: maximum design speed exceeding 40 km/h)
STU: roll-over protective structure (ROPS) (dynamic testing)
Test report issued under the OECD standard code for the official testing of protective structures on agricultural and forestry tractors (dynamic test), OECD Code 3, Edition 2012 of Fe2012
STU: roll-over protective structure (ROPS) (track-laying tractors)
Test reports issued under the OECD standard code for the official testing of protective structures on agricultural and forestry track-laying tractors, OECD Code 8, Edition 2012 of February 2012
STU: roll-over protective structure (ROPS) (static testing)
Test reports issued under the OECD standard Code for the official testing of protective structures on agricultural and forestry tractors (static test), OECD Code 4, Edition 2012 of February 2012
STU: roll-over protective structure (ROPS) (front mounted roll-over protective structures on narrow-track tractors)
Test reports in conformity with the OECD standard code for the official testing of front mounted roll-over protective structures on narrow-track wheeled agricultural and forestry tractors, OECD Code 6, Edition 2012 of February 2012
STU: roll-over protective structure (ROPS) (rear mounted roll-over protective structures on narrow-track tractors)
Test reports in conformity with the OECD standard code for the official testing of rear mounted roll-over protective structures on narrow-track wheeled agricultural and forestry tractors, OECD Code 7, Edition 2012 of February 2012
STU: falling objects protective structure (FOPS)
Test report issued under Directive 2009/144/EC as amended by Commission Directive 2010/52/EU or OECD standard code for the official testing of falling object protective structures on agricultural and forestry tractors Code 10 — Edition 2009 of February 2009
Component/STU: driver's seat
Test report issued under Council Directive 78/764/EEC as amended by Commission Directive 1999/57/EC
Component/STU: safety belts
Test report issued under UNECE Regulation No 16 Supplement 1 to the 06 series of amendments (OJ L 233, 9.9.2011, p. 1)
STU: protection against penetrating objects (OPS)
Test report issued under Directive 2009/144/EC as amended by Commission Directive 2010/52/EU, and
Test report issued under UNECE Regulation No 43 Supplement 12 to the 00 series of amendments, Annex 14 (OJ L 230, 31.8.2010, p. 119)

---
Source: https://www.legislation.gov.uk/eur/2015/504/annex/VIII/division/3/division/3.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-504/annex-VIII/division-3/division-3.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.