Division 26.30 Demonstration of complianceF1

F2The CAA shall issue, in accordance with Article 76(3) of Regulation (EU) 2018/1139, certification specifications as standard means to demonstrate compliance with this Annex. The certification specifications shall be sufficiently detailed and specific to indicate the conditions under which compliance with the requirements of this Annex may be demonstrated.

F3Operators and holders of a type certificate, restricted type certificate, supplemental type certificate or a change and repair design approval may demonstrate compliance with the requirements of this Annex by complying with either of the following:

1. (i)

   the specifications issued by the CAA under point (a) of this point or the equivalent certification specifications issued by the CAA under point 21.B.70 of Annex I to Regulation (EU) No 748/2012;

2. (ii)

   technical standards offering an equivalent level of safety to those included in those certification specifications.

F4Holders of a type certificate, restricted type certificate, supplemental type certificate or a change and repair design approval shall make available to each known operator of the aeroplanes any changes to the “Instructions for Continued Airworthiness” (ICA) required to demonstrate compliance with this Annex. For the purposes of this Regulation, the ICA also include damage tolerance inspections (DTIs), repair evaluation guidelines (REGs), a baseline corrosion prevention and control programme (CPCP) and a list of fatigue-critical structures (FCSs) and airworthiness limitation sections (ALSs).