# Commission Delegated Regulation (EU) 2015/68 of 15 October 2014 supplementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to vehicle braking requirements for the approval of agricultural and forestry vehicles (Text with EEA relevance), Division 6.2.2

Extent: E+W+S+N.I.

In the case when an overload protector is fitted or intended to be fitted within the inertia braking system, the wheel brake shall be tested with the following test forces or pressures:
6.2.2.1. The minimum design values for an overload protector shall be specified by the manufacturer and shall not be less than
Pop = 1,2 P* or pop = 1,2 p*
6.2.2.2. The ranges of minimum test force PTop or minimum test pressure pTop and the minimum test torque MTop are:
PTop = 1,1 to 1,2 P* or pTop = 1,1 to 1,2 p*
and
MTop = 1,1 to 1,2 M*
6.2.2.3. The maximum values (Pop_max or pop_max) for the overload protector shall be specified by the manufacturer and shall not be more than PT or pT respectively.

---
Source: https://www.legislation.gov.uk/eur/2015/68/annex/VIII/division/6/division/6.2/division/6.2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2015-68/annex-VIII/division-6/division-6.2/division-6.2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.