{
  "url": "https://openlegislation.uk/eu-regulation-2015-982/annex",
  "json_url": "https://openlegislation.uk/eu-regulation-2015-982/annex.json",
  "legislation": "eur/2015/982",
  "legislation_title": "Council Regulation (EU) 2015/982 of 23 June 2015 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2015-982",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "The Annexes to Regulation (EU) No 1387/2013 are amended as follows:\n(1) Annex I is amended as follows:\n(a) the note between the title and the table is replaced by the following note:\n‘(*)\nSuspension relating to a product in this Annex with regard to which the CN or TARIC code or the product description or the mandatory review date were amended by Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 192, 1.7.2014, p. 9), by Council Regulation (EU) No 1341/2014 of 15 December 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products or by Council Regulation (EU) 2015/982 of 23 June 2015 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 159, 25.6.2015, p. 5)’;\n(b) the following rows for the products are inserted following the order of the CN codes indicated in the first column of the table:\nSuspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1).\nHowever, the measure is not allowed where processing is carried out by retail or catering undertakings.’\nCN code\nTARIC\nDescription\nRate of autonomous duty\nDate foreseen for mandatory review\n‘*ex 2009 89 73\nex 2009 89 73\n11\n13\nPassion fruit juice and passion fruit juice concentrate, whether or not frozen:\nwith a Brix value of 13,7 or more but not more than 55,\nof a value of more than EUR 30 per 100 kg net weight,\nin immediate packings of a content of 50 litres or more, and\nwith added sugar\nfor use in the manufacture of products of the food or drink industry\n0 %\n31.12.2019\n*ex 2009 89 99\n94\nCoconut water:\nunfermented,\nnot containing added spirit or sugar, and\nin immediate packing of a content of 50 litres or more\n0 %\n31.12.2016\n*ex 2207 20 00\nex 2207 20 00\nex 3820 00 00\n20\n80\n20\nFeedstock consisting of by weight:\n88 % or more but not more than 92 % of ethanol,\n2,2 % or more but not more than 2,7 % of monoethylene glycol,\n1,0 % or more but not more than 1,3 % of methylethylketone,\n0,36 % or more but not more than 0,40 % of anionic surfactant (ca. 30 % active),\n0,0293 % or more but not more than 0,0396 % of methyl isopropylketone,\n0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone,\n10 ppm or more but not more than 12 ppm of denatonium benzoate (Bitrex),\nnot more than 0,01 % of perfumes,\n6,5 % or more but not more than 8,0 % of water,\nfor use in the manufacture of screenwash concentrate and other de-icing preparations\n0 %\n31.12.2018\nex 2710 19 99\n20\nCatalytic de-waxed base oil, produced by synthesis from gaseous hydrocarbons followed by a heavy paraffin conversion process (HPC), containing:\nnot more than 1 mg/kg of sulphur\nmore than 99 % by weight of saturated hydrocarbons\nmore than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and\na kinematic viscosity at 40 °C of more than 6,5 mm2/s, or\na kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more\n0 %\n31.12.2019\n*ex 2818 10 91\n20\nSintered corundum with a microcrystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum and neodymium, with a content by weight (calculated as oxides) of:\n94 % or more, but less than 98,5 % of aluminium oxide,\n2 % (± 1,5 %) of magnesium oxide,\n1 % (± 0,6 %) of yttrium oxide,\nand:\neither 2 % (± 1,2 %) of lanthanum oxide or\n2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,\nwith less than 50 % of the total weight having a particle size of more than 10 mm\n0 %\n31.12.2015\nex 2827 60 00\n10\nSodium iodide (CAS RN 7681-82-5)\n0 %\n31.12.2019\nex 2841 70 00\n30\nHexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)\n0 %\n31.12.2019\nex 2903 39 90\n35\nPentafluoroethane (CAS RN 354-33-6)\n0 %\n31.12.2019\nex 2903 79 19\n10\nTrans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)\n0 %\n31.12.2019\nex 2904 90 95\n80\n1-Chloro-2-nitrobenzene (CAS RN 88-73-3)\n0 %\n31.12.2019\nex 2905 22 00\n10\nLinalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-linalool (CAS RN 126-91-0)\n0 %\n31.12.2019\nex 2907 12 00\n30\np-Cresol (CAS RN 106-44-5)\n0 %\n31.12.2019\nex 2907 29 00\n25\n4-Hydroxybenzyl alcohol (CAS RN 623-05-2)\n0 %\n31.12.2019\nex 2907 29 00\n65\n2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)\n0 %\n31.12.2019\nex 2909 60 00\n30\n3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons\n0 %\n31.12.2019\nex 2914 69 90\n50\nReaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)\n0 %\n31.12.2019\nex 2916 39 90\n18\n2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9)\n0 %\n31.12.2019\nex 2916 39 90\n23\n(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)\n0 %\n31.12.2019\nex 2917 39 95\n50\n1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)\n0 %\n31.12.2019\nex 2917 39 95\n60\nPerylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128-69-8)\n0 %\n31.12.2019\nex 2918 29 00\n70\n3,5-Diiodosalicylic acid (CAS RN 133-91-5)\n0 %\n31.12.2019\nex 2918 30 00\n70\n2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)\n0 %\n31.12.2019\nex 2918 99 90\n55\nStearyl glycyrrhetinate (CAS RN 13832-70-7)\n0 %\n31.12.2019\nex 2918 99 90\n65\nAcetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)\n0 %\n31.12.2019\nex 2918 99 90\n75\n3,4-Dimethoxybenzoic acid (CAS RN 93-07-2)\n0 %\n31.12.2019\nex 2921 42 00\n40\nSodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)\n0 %\n31.12.2019\nex 2922 49 85\n55\n(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7)\n0 %\n31.12.2019\nex 2923 90 00\n20\nTetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)\n0 %\n31.12.2019\nex 2924 19 00\n35\nAcetamide (CAS RN 60-35-5)\n0 %\n31.12.2019\nex 2924 29 98\n23\nBenalaxyl-M (ISO) (CAS RN 98243-83-5)\n0 %\n31.12.2019\nex 2924 29 98\n33\nN-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)\n0 %\n31.12.2019\nex 2924 29 98\n73\nNapropamide (ISO) (CAS RN 15299-99-7)\n0 %\n31.12.2019\n*ex 2927 00 00\n35\nC,C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam\n0 %\n31.12.2019\nex 2928 00 90\n13\nCymoxanil (ISO) (CAS RN 57966-95-7)\n0 %\n31.12.2019\nex 2928 00 90\n18\nAcetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more\n0 %\n31.12.2019\nex 2930 90 99\n16\n3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)\n0 %\n31.12.2019\nex 2930 90 99\n21\n[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)\n0 %\n31.12.2016\nex 2930 90 99\n27\n2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)\n0 %\n31.12.2019\nex 2930 90 99\n33\n2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonic acid (CAS RN 42986-22-1)\n0 %\n31.12.2019\nex 2933 39 99\n11\n2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride (CAS RN 153259-31-5)\n0 %\n31.12.2019\nex 2933 39 99\n21\nBoscalid (ISO) (CAS RN 188425-85-6)\n0 %\n31.12.2019\nex 2933 39 99\n31\n2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride (CAS RN 127337-60-4)\n0 %\n31.12.2019\nex 2933 59 95\n10\n6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)\n0 %\n31.12.2019\nex 2933 69 80\n75\nMetamitron (ISO) (CAS RN 41394-05-2)\n0 %\n31.12.2019\nex 2933 99 80\n11\nFenbuconazole (ISO) (CAS RN 114369-43-6)\n0 %\n31.12.2019\nex 2933 99 80\n12\nMyclobutanil (ISO) (CAS RN 88671-89-0)\n0 %\n31.12.2019\nex 2933 99 80\n19\n2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)\n0 %\n31.12.2019\nex 2934 99 90\n10\nFluralaner (INN) (CAS RN 864731-61-3)\n0 %\n31.12.2019\nex 2934 99 90\n16\nDifenoconazole (ISO) (CAS RN 119446-68-3)\n0 %\n31.12.2019\nex 2934 99 90\n19\n2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3)\n0 %\n31.12.2019\nex 2935 00 90\n10\nFlorasulam (ISO) (CAS RN 145701-23-1)\n0 %\n31.12.2019\nex 3204 12 00\n60\nColourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight\n0 %\n31.12.2019\nex 3204 13 00\n50\nColourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight\n0 %\n31.12.2019\nex 3204 13 00\n60\nColourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight\n0 %\n31.12.2019\nex 3204 14 00\n10\nColourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight\n0 %\n31.12.2019\nex 3204 14 00\n20\nColourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight\n0 %\n31.12.2019\nex 3204 14 00\n30\nC.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight\n0 %\n31.12.2019\nex 3204 17 00\n45\nColourant C.I. Pigment Yellow 174 (CAS RN 4118-16-5), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight\n0 %\n31.12.2018\nex 3204 17 00\n67\nColourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight.\n0 %\n31.12.2018\nex 3204 90 00\n10\nColourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight\n0 %\n31.12.2019\nex 3212 10 00\nex 7607 20 90\n10\n30\nMetallised film:\nconsisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,\nwith an optical density of each aluminium layer of not more than 3.0,\nwith each aluminium layer separated by a resin layer,\non a carrier film of PET, and\non rolls of up to 50 000 metres in length\n0 %\n31.12.2019\nex 3808 94 20\n30\nBromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:\n1,3-dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),\n1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),\n1-bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and\n1-chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)\n0 %\n31.12.2019\nex 3811 21 00\n23\nAdditives containing:\npolyisobutene succinimide derived from reaction of polyethylenepropylamide with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),\nmore than 31,9 % but not more than 43,3 % by weight of mineral oils, and\nnot more than 0,05 % by weight chlorine,\nhaving a total base number (TBN) greater than 20,\nfor use in the manufacture of additives blends for lubricating oils\n0 %\n31.12.2019\n*ex 3811 21 00\n53\nAdditives containing:\noverbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and\nby weight more than 40 % but not more than 60 % of mineral oil,\nhaving a total base number (TNB) of 280 or more but not more than 420,\nfor use in the manufacture of lubricating oils\n0 %\n31.12.2019\n*ex 3811 21 00\n73\nAdditives containing:\nborated succinimide compounds (CAS RN 134758-95-5), and\nmineral oils,\nhaving a total base number (TBN) greater than 40,\nfor use in the manufacture of additive mixtures for lubricating oils\n0 %\n31.12.2018\nex 3812 30 29\n10\n4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6)\n0 %\n31.12.2019\nex 3824 90 92\n82\nT-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene\n0 %\n31.12.2019\n*ex 3824 90 92\n83\nPreparation consisting of two or more of the following glycols:\ndipropylene glycol,\ntripropylene glycol,\ntetrapropylene glycol or\npentapropylene glycol\n0 %\n31.12.2017\n*ex 3824 90 93\n46\nSodium hydrogen 3-aminonaphthalene-1,5-disulfonate (CAS RN 4681-22-5) containing by weight:\nnot more than 20 % of disodium sulphate, and\nnot more than 5 % of sodium chloride\n0 %\n31.12.2015\n*ex 3901 10 10\nex 3901 90 90\n20\n50\nHigh-flow linear low-density polyethylene-1-butene (LLDPE) (CAS RN 25087-34-7) in form of powder, with:\na melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min,\na density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, and\na vicat softening temperature of min. 94 °C\n0 %\n31.12.2019\nex 3901 10 10\n30\nLinear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with:\nnot more than 5 % by weight of comonomer,\na melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and\na density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3\n0 %\n31.12.2018\n*ex 3901 90 90\n60\nLinear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with:\nmore than 5 %, but not more than 8 % by weight of comonomer,\na melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and\na density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3\n0 %\n31.12.2018\n*ex 3903 19 00\n40\nCrystalline polystyrene with:\na melting point of 268 °C or more but not more than 272 °C, and\na setting point of 232 °C or more but not more than 247 °C,\nwhether or not containing additives and filling material\n0 %\n31.12.2016\nex 3903 90 90\n45\nPreparation, in form of powder, containing by weight:\n86 % or more but not more than 90 % of styrene-acrylic-copolymer and\n9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)\n0 %\n31.12.2019\nex 3903 90 90\n55\nPreparation, in form of an aqueous suspension, containing by weight:\n25 % or more but not more than 26 % of styrene-acrylic-copolymer and\n5 % or more but not more than 6 % of glycol\n0 %\n31.12.2019\nex 3908 90 00\n70\nCopolymer containing:\n1,3-benzenedimethanamine (CAS RN 1477-55-0) and\nadipic acid (CAS RN 124-04-9),\nwhether or not containing isophthalic acid (CAS RN 121-91-5)\n0 %\n31.12.2019\nex 3911 90 19\n60\nFormaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6)\n0 %\n31.12.2019\nex 3911 90 19\n70\nPreparation containing:\ncyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), and\n1,3-bis(4-cyanophenyl)propane (CAS RN 1156-51-0),\nin a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight\n0 %\n31.12.2019\n*ex 3912 20 19\n10\nNitrocellulose (CAS RN 9004-70-0)\n0 %\n31.12.2016\n*ex 3919 10 80\nex 3919 90 00\nex 3920 61 00\n57\n30\n30\nReflecting sheet:\nof a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern\ncovered on one or both sides with one or more layers of plastic or metallisation, and\nwhether or not covered on one side with a self-adhesive layer and a release sheet\n0 %\n31.12.2018\n*ex 3919 10 80\nex 3919 90 00\n67\n46\nSelf-adhesive reflecting sheet whether or not in segmented pieces:\nshowing a regular pattern,\nwith or without an application tape layer,\nconsisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,\nwhether or not containing an additional layer of polyester and an adhesive with a final release sheet\n0 %\n31.12.2018\n*ex 3919 90 00\n48\nTransparent poly(vinyl chloride) film:\ncoated on one side with an acrylic UV-sensitive adhesive with an adhesive strength of 70 N/m or more, which is reduced upon irradiation,\nwith a polyester liner\nwith a total thickness without release liner of 78 μm or more\n0 %\n31.12.2019\nex 3920 10 28\n30\nPrinted embossed film:\nof polymers of ethylene\nhaving a gravity of 0,94 g/cm3 or more\nof a thickness of 0,019 mm ± 0,003 mm\nwith permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more\n0 %\n31.12.2019\n*ex 3920 62 19\n60\nPoly(ethylene terephtalate) film:\nof a thickness of not more than 20 μm,\ncoated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm\n0 %\n31.12.2017\nex 3920 69 00\n50\nMonolayer, biaxially oriented film:\ncomposed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,\nhaving a thickness of 20 μm or more but not more than 120 μm\nbiodegradable and compostable (as determined by the method EN 13432)\n0 %\n31.12.2019\nex 3920 69 00\n60\nMonolayer, transverse oriented, shrink film:\ncomposed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),\nhaving a thickness of 45 μm or more but not more than 50 μm,\nbiodegradable and compostable (as determined by the method EN 13432)\n0 %\n31.12.2019\nex 3920 79 10\n10\nSheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm\n0 %\n31.12.2019\nex 3920 99 28\n65\nMatt, thermoplastic polyurethane foil in rolls with:\na width of 1 640 mm (± 10 mm),\na gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),\na surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),\na thickness of more than 365 μm but not more than 760 μm,\na hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),\nan elongation to break of 470 % (as determined by the method: EN ISO 527)\n0 %\n31.12.2019\nex 3920 99 28\n75\nThermoplastic polyurethane foil in rolls with:\na width of more than 900 mm but not more than 1 016 mm,\na matt finish,\na thickness of 0,43 mm (± 0,03 mm),\nan elongation to break of 420 % or more but not more than 520 %,\na tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)\na hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),\nwrinkle inside (waves) of 6,35 mm,\na flatness of 0,025 mm\n0 %\n31.12.2019\nex 3921 90 60\n30\nHeat-, infra- and UV insulating poly(vinyl butyral) film:\nlaminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm),\ncontaining by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticizer,\nwith a light transmission of 70 % or more (as determined by the ISO 9050 standard),\nwith an UV transmission of 1 % or less (as determined by the ISO 9050 standard),\nwith a total thickness of 0,43 mm (± 0,043 mm)\n0 %\n31.12.2019\nex 6804 21 00\n10\nDiscs:\nof synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,\nhaving a self-sharpening effect by constant release of the diamonds,\nsuitable for abrasive cutting of wafers,\nwhether or not containing a hole in the centre,\nwhether or not on a support\n0 %\n31.12.2019\nex 7409 11 00\nex 7409 19 00\nex 7410 11 00\n10\n10\n20\nRefined copper foil and strips of a thickness of not more than 400 μm\n0 %\n31.12.2019\n*ex 7606 12 92\nex 7607 11 90\n30\n50\nAluminium and magnesium alloy strip or foil:\nin rolls,\nof a thickness of 0,14 mm or more but not more than 0,40 mm,\na width of 12,5 mm or more but not more than 359 mm,\na tensile strength of 285 N/mm2 or more, and\nan elongation at break of 1 % or more, and\ncontaining by weight:\n93,3 % or more of aluminium,\n0,8 % or more but not more than 5 % of magnesium, and\nnot more than 1,8 % of other elements\n0 %\n31.12.2017\n*ex 7607 11 90\n60\nPlain aluminium foil with the following parameters:\nan aluminium content of 99,98 % or more,\na thickness of 0,070 mm or more but not more than 0,125 mm,\nwith a cubic texture,\nof a kind used for high voltage etching\n0 %\n31.12.2016\nex 7616 99 10\n30\nAluminium engine bracket, with dimensions of:\nheight of more than 10 mm but not more than 200 mm,\nwidth of more than 10 mm but not more than 200 mm,\nlength of more than 10 mm but not more than 200 mm,\nequipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:\ninternal porosity not more than 1 mm,\nouter porosity not more than 2 mm,\nRockwell hardness HRB 10 or more,\nof a kind used in the production of suspensions systems for engines in motor vehicles\n0 %\n31.12.2019\n*ex 8108 90 30\n50\nTitanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 and 4967\n0 %\n31.12.2015\nex 8108 90 50\n80\nPlates, sheets, strips and foil of non-alloyed titanium:\nof a width of more than 750 mm,\nof a thickness of not more than 3 mm\n0 %\n31.12.2019\nex 8108 90 50\n85\nStrip or foil of non-alloyed titanium:\ncontaining more than 0,07 % by weight of oxygen (O2),\nof a thickness of 0,4 mm or more but not more than 2,5 mm,\nconforming to the Vickers hardness HV1 standard of not more than 170,\nof a kind used in the manufacture of welded tubes for nuclear power plant condensers\n0 %\n31.12.2019\nex 8409 99 00\nex 8411 99 00\n30\n70\nSpiral-shaped gas turbine turbocharger component:\nwith a heat-resistance of not more than 1 050 °C,\nwith a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,\nwhether or not with an engine exhaust manifold\n0 %\n31.12.2018\nex 8411 99 00\n60\nWheel-shaped gas turbine component with blades, of a kind used in turbochargers:\nof a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,\nwith a heat-resistance of not more than 1 100 °C,\nwith a diameter of 30 mm or more, but not more than 100 mm,\nwith a height of 20 mm or more, but not more than 70 mm\n0 %\n31.12.2017\nex 8479 89 97\n70\nMachine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy\n0 %\n31.12.2019\nex 8479 89 97\n80\nMachinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries\n0 %\n31.12.2019\n*ex 8483 30 38\n40\nCylindrical bearing housing:\nof precision-cast grey cast iron complying with standard DIN EN 1561,\nwith oil chambers,\nwithout bearings,\nwith a diameter of 50 mm or more, but not more than 250 mm,\nwith a height of 40 mm or more, but not more than 150 mm,\nwhether or not with water chambers and connectors\n0 %\n31.12.2017\nex 8501 32 00\nex 8501 33 00\n60\n15\nTraction motor, with:\na torque output of 200 Nm or more but not more than 300 Nm,\na power output of 50 kW or more but not more than 100 kW,\na speed of not more than 12 500 rpm,\nfor use in the manufacture of electric vehicles\n0 %\n31.12.2019\nex 8504 40 88\n30\nDC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles\n0 %\n31.12.2019\nex 8504 40 90\n80\nPower converter containing:\na DC to DC converter,\na charger of a capacity of not more than 7 kW,\nswitching functions,\nfor use in the manufacture of electric vehicles\n0 %\n31.12.2019\nex 8505 90 20\n30\nCoil for an electromagnetic valve, with:\na plunger,\na diameter of 12,9 mm (± 0,1),\na height without plunger of 20,5 mm (± 0,1),\nan electric cable with connector, and\nin a cylindrical metal housing\n0 %\n31.12.2019\n*ex 8507 10 20\n30\nLead-acid accumulators or modules, of a kind used for starting piston engines, with:\na nominal capacity of not more 32 Ah,\na length of not more than 205 mm,\na width of not more than 130 mm and\na height of not more than 190 mm,\nfor use in the manufacture of articles of CN code 8711\n0 %\n31.12.2018\n*ex 8507 60 00\n85\nRectangular modules for incorporation in lithium-ion rechargeable batteries:\nof a length of 312 mm or more, but not more than 350 mm,\nof a width of 79,8 mm or more, but not more than 225 mm,\nof a height of 35 mm or more, but not more than 168 mm,\nof a weight of 3,95 kg or more, but not more than 8,56 kg,\nwith a rating of 66,6 Ah or more, but not more than 129 Ah\n0 %\n31.12.2015\nex 8507 60 00\n87\nLithium-ion rechargeable batteries, with:\na length of 1 475 mm or more, but not more than 2 820 mm,\na width of 935 mm or more, but not more than 1 660 mm,\na height of 260 mm or more, but not more than 600 mm,\na weight of 320 kg or more, but not more than 700 kg,\na nominal capacity of 18,4 Ah or more, but not more than 130 Ah,\nput up in packs of 12 or 16 modules\n0 %\n31.12.2017\n*ex 8511 30 00\n30\nIgniter integrated coil assembly with:\nan igniter,\na coil on plug assembly with an integrated mounting bracket,\na housing,\na length of 90 mm or more but not more than 200 mm (± 5 mm),\nan operating temperature of – 40 °C or more but not more than 130 °C,\na voltage of 10,5 V or more, but not more than 16 V\n0 %\n31.12.2019\nex 8512 20 00\n10\nFog lamps with galvanised inner surface, containing:\nplastic holder with four or more brackets,\none or more, but not more than two 12 V bulbs,\nconnection cable with a connector,\nplastic cover,\nfor use in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8512 20 00\n20\nInformation screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8512 30 90\n10\nHorn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:\ncoil,\nmagnet,\nmetal membrane,\nconnector,\nholder,\nof a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8512 90 90\n10\nUltrasonic parking sensor with:\nprinted circuit board inside the housing and sensor cell on the cover connected through terminal pins,\nan operating voltage of not more than 12 V,\nability to receive and transmit signals processed by the control unit,\nof a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8514 20 80\nex 8516 50 00\nex 8516 60 80\n10\n10\n10\nCavity assembly comprising at least:\na transformer with an input of not more than 240 V and an output of not more than 3 000 W,\nan AC or DC fan motor with an output of not more than 42 watts,\na housing made of stainless steel,\nwith or without a magnetron of a microwave output power of not more than 900 W.\nfor use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 80\n0 %\n31.12.2019\nex 8516 90 00\n80\nDoor assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 80\n0 %\n31.12.2019\nex 8518 90 00\n80\nIntegrated car loudspeaker housing, consisting of:\na speaker frame and magnet system holder with a protective coating and\nan embossed anti-dust cloth\n0 %\n31.12.2019\n*ex 8525 80 19\n60\nImage scanning cameras, using:\na “Dynamic”- or “Static overlay lines” system,\nan output NTSC video signal,\na voltage of 6,5 V or more,\nan illuminance of 0,5 lux or more\n0 %\n31.12.2019\n*ex 8527 91 99\nex 8529 90 65\n20\n85\nAssembly consisting of at least:\nan audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,\na transformer and\na radio broadcast receiver\nfor use in the manufacture of consumer electronic products\n0 %\n31.12.2019\nex 8529 10 80\n70\nCeramic filters:\nwith an applicable frequency range of 10 kHz or more but no more than 100 MHz,\nwith a housing of ceramic plates provided with electrodes,\nof a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment\n0 %\n31.12.2019\nex 8529 90 65\n80\nTuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527\n0 %\n31.12.2019\n*ex 8529 90 92\nex 8548 90 90\n15\n60\nLCD modules:\nsolely consisting of one or more TFT glass or plastic cells,\nnot combined with touch screen facilities,\nwith one or more printed circuits boards with control electronics for pixel addressing only,\nwith or without backlight unit and\nwith or without inverters\n0 %\n31.12.2018\nex 8537 10 99\n40\nElectronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:\na length of 50 mm or more, but not more than 120 mm,\na width of 20 mm or more but not more than 40 mm,\na height of 30 mm or more, but not more than 120 mm,\nof a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8537 10 99\n50\nElectronic control unit BCM (Body Control Module) comprising:\nplastic box with printed circuit board and metal holder,\nwith voltage of 9 V or more, but not more than 16 V,\nable to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,\nof a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8537 10 99\n60\nElectronic assembly consisting of:\na microprocessor,\nlight-emitting diode (LED) or liquid crystal display (LCD) indicators,\nelectronic components mounted on a printed circuit,\nfor use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 80\n0 %\n31.12.2019\nex 8544 49 91\n10\nInsulated copper electrical wires:\nwith individual conductor wires of a diameter exceeding 0,51 mm,\nfor a voltage of not more than 1 000 V,\nfor use in the manufacture of automotive cable harnesses\n0 %\n31.12.2019\n*ex 8548 90 90\n65\nLCD modules:\nsolely consisting of one or more TFT glass or plastic cells,\ncombined with touch screen facilities,\nwith one or more printed circuits boards with control electronics for pixel addressing only,\nwith or without backlight unit and\nwith or without inverters\n0 %\n31.12.2018\nex 8708 30 10\n10\nBrake unit assembly comprising\nelectric control brake,\nstroke sensor,\nVDC (vehicle dynamic control) and\nbackup power source,\nfor use in the manufacture of vehicles\n0 %\n31.12.2019\nex 8708 30 91\n20\nNon-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8708 30 91\n30\nBody of disc type brake in BIR (“Ball in Ramp”) or EPB (“Electronic Parking Brake”) version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8708 91 35\n10\nAluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 8708 94 35\n20\nRack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 9002 11 00\n80\nLens assembly with:\na field of view range of 58,5 deg or more, but not more than 194 deg,\na focal length of 1,16 mm or more, but not more than 3,88 mm,\na relative aperture of F/2.0 or more but not more than 2.6,\na diameter of 17 mm or more but not more than 18,5 mm,\nfor use in the manufacture of CMOS automotive cameras\n0 %\n31.12.2019\nex 9029 10 00\n30\nSpeed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 9029 20 31\nex 9029 90 00\n10\n20\nClustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least:\nspeed,\nengine revolutions,\nengine temperature,\nthe fuel level\ncommunicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 9031 80 34\n50\nProgrammable dual linear Hall sensor:\nconsisting of two non-electrically connected integrated circuits, a top die and a bottom die,\npositioned on the top and bottom of a lead frame,\nin a semiconductor housing,\nfor use as a means for measuring angles, positions and currents in cars\n0 %\n31.12.2019\nex 9031 80 38\n50\nGyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising:\na piezoelectric crystal for generating an electrical potential during deformation and\na plastic box with metal holder,\nof a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 9031 80 38\n60\nCongestion sensor, printed circuit board and connector, moulded together in plastic, for monitoring congestion “G” and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87\n0 %\n31.12.2019\nex 9031 80 98\n30\nFunctional Test Machine for calibrating and image quality testing lenses in automotive cameras\n0 %\n31.12.2019\n(c) the rows for the products with the following CN and TARIC codes are deleted:\nCN code\nTARIC\n‘ex 2009 89 73\n11\nex 2009 89 73\n13\nex 2009 89 99\n93\nex 2207 20 00\n20\nex 2207 20 00\n80\nex 2818 10 91\n10\nex 2915 90 70\n40\nex 2921 45 00\n10\nex 2927 00 00\n15\nex 2932 99 00\n35\nex 2934 99 90\n33\nex 3204 20 00\n40\nex 3811 21 00\n43\nex 3811 21 00\n53\nex 3820 00 00\n20\nex 3824 90 92\n52\nex 3901 10 10\n10\nex 3901 10 10\n20\nex 3901 90 90\n30\nex 3901 90 90\n40\nex 3901 90 90\n50\nex 3903 19 00\n30\nex 3912 20 11\n10\nex 3919 10 80\n21\nex 3919 10 80\n65\nex 3919 90 00\n21\nex 3919 90 00\n37\nex 3919 90 00\n57\nex 3920 61 00\n20\nex 3920 62 19\n81\nex 7606 12 92\n20\nex 7607 11 90\n10\nex 7607 11 90\n20\nex 8108 90 30\n30\nex 8411 99 00\n30\nex 8411 99 00\n40\nex 8483 30 38\n30\nex 8504 50 95\n60\nex 8507 10 20\n85\nex 8507 60 00\n35\nex 8507 60 00\n70\nex 8511 30 00\n20\nex 8525 80 19\n35\nex 8527 21 59\n10\nex 8527 29 00\n20\nex 8527 29 00\n30\nex 8527 91 99\n10\nex 8529 90 65\n35\nex 8529 90 92\n44\nex 8543 70 90\n13\nex 8543 70 90\n23\nex 8548 90 90\n47\nex 8548 90 90\n49\nex 8548 90 90\n55\nex 9405 40 39\n50\nex 9405 40 39\n60\nex 9405 40 99\n03\nex 9405 40 99\n06’\n(2) Annex II is amended as follows:\n(a) the following rows for the supplementary units with the CN and TARIC codes are added:\nCN\nTARIC\nSUPPLEMENTARY UNIT\n‘9031 80 34\n50\n1 000 p/st\n8544 49 91\n10\nm\n3901 10 10\n30\nm3\n3901 90 90\n60\nm3\n3920 99 28\n65\nm2\n3920 99 28\n75\nm2\n3921 90 60\n30\nm2\n3903 90 90\n45\nm3\n3920 79 10\n10\np/st\n6804 21 00\n10\np/st\n7616 99 10\n30\np/st\n8409 99 00\n30\np/st\n8411 99 00\n60\np/st\n8411 99 00\n70\np/st\n8479 89 97\n70\np/st\n8479 89 97\n80\np/st\n8483 30 38\n40\np/st\n8504 40 88\n30\np/st\n8504 40 90\n80\np/st\n8505 90 20\n30\np/st\n8511 30 00\n30\np/st\n8512 20 00\n10\np/st\n8512 20 00\n20\np/st\n8512 30 90\n10\np/st\n8512 90 90\n10\np/st\n8514 20 80\n10\np/st\n8516 90 00\n80\np/st\n8518 90 00\n80\np/st\n8529 10 80\n70\np/st\n8529 90 65\n80\np/st\n8529 90 92\n15\np/st\n8537 10 99\n40\np/st\n8537 10 99\n50\np/st\n8537 10 99\n60\np/st\n8548 90 90\n60\np/st\n8548 90 90\n65\np/st\n8708 30 10\n10\np/st\n8708 30 91\n20\np/st\n8708 30 91\n30\np/st\n8708 91 35\n10\np/st\n8708 94 35\n20\np/st\n9029 10 00\n30\np/st\n9029 20 31\n10\np/st\n9029 90 00\n20\np/st\n9031 80 38\n50\np/st\n9031 80 38\n60\np/st\n9031 80 98\n30\np/st’\n(b) the following rows for the supplementary units with the CN and TARIC codes are deleted:\nCN\nTARIC\nSUPPLEMENTARY UNIT\n‘3901 10 10\n10\nm3\n3901 90 90\n30\nm3\n8411 99 00\n30\np/st\n8411 99 00\n40\np/st\n8483 30 38\n30\np/st\n8504 50 95\n60\np/st\n8511 30 00\n20\np/st\n8527 29 00\n30\np/st\n8529 90 92\n44\np/st\n8543 70 90\n13\np/st\n8543 70 90\n23\np/st\n8548 90 90\n47\np/st\n8548 90 90\n49\np/st\n8548 90 90\n55\np/st\n9405 40 39\n50\np/st\n9405 40 99\n03\np/st\n9405 40 99\n06\np/st’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1)."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "However, the measure is not allowed where processing is carried out by retail or catering undertakings.’"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2015/982/annex",
    "retrieved_at": "2026-11-01T14:46:37.763986+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}