{
  "url": "https://openlegislation.uk/eu-regulation-2016-1051/annex-I",
  "json_url": "https://openlegislation.uk/eu-regulation-2016-1051/annex-I.json",
  "legislation": "eur/2016/1051",
  "legislation_title": "Council Regulation (EU) 2016/1051 of 24 June 2016 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2016-1051",
  "path": "annex/I",
  "kind": "annex",
  "number": "I",
  "heading": null,
  "text": "CN code\nTARIC\nDescription\nRate of autonomous duty\nSupplementary Unit\nDate foreseen for mandatory review\nex 1512 19 10\n10\nRefined safflower oil (Safloröl, CAS RN 8001-23-8) for use in the manufacture of\nconjugated linoleic acid of heading 3823 or\nethyl- or methyl esters of linoleic acid of heading 2916 (1)\n0 %\n—\n31.12.2020\n*ex 2008 99 91\n20\nChinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking (1) (2)\n0 % (3)\n—\n31.12.2020\n*ex 2009 89 99\n96\nCoconut water\nunfermented,\nnot containing added spirit or sugar, and\nin immediate packing of a content of 50 litres or more (2)\n0 %\n—\n31.12.2016\n*ex 2106 10 20\n30\nPreparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate\n0 %\n—\n31.12.2018\n*ex 2805 19 90\n20\nLithium metal of a purity by weight of 98,8 % or more (CAS RN 7439-93-2)\n0 %\n—\n31.12.2017\nex 2811 22 00\n70\nAmorphous silicon dioxide (CAS RN 60676-86-0),\nin the form of powder\nof a purity by weight of 99,7 % or more\nwith a median grain size of 0,7 μm or more, but not more than 2,1 μm\nwhere 70 % of the particles have a diameter of not more than 3 μm\n0 %\n—\n31.12.2020\nex 2818 30 00\n20\nAluminium hydroxide (CAS RN 21645-51-2)\nin the form of powder\nwith a purity by weight of 99,5 % or more\nwith a decomposition point of 263o C or more\nwith a particle size of 4 μm (± 1 μm)\nwith a Total-Na2O-content by weight of not more than 0,06 %\n0 %\n—\n31.12.2020\nex 2825 50 00\n30\nCopper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm\n0 %\n—\n31.12.2020\n*ex 2836 99 17\n30\nZirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more\n0 %\n—\n31.12.2018\n*ex 2903 39 29\n10\n1H-Perfluorohexane (CAS RN 355-37-3)\n0 %\n—\n31.12.2018\nex 2906 29 00\n40\n2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)\n0 %\n—\n31.12.2020\nex 2908 19 00\n40\n3,4,5-Trifluorophenol (CAS RN 99627-05-1)\n0 %\n—\n31.12.2020\nex 2908 19 00\n50\n4-Fluorophenol (CAS RN 371-41-5)\n0 %\n—\n31.12.2020\nex 2909 30 90\n50\n1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)\n0 %\n—\n31.12.2020\nex 2909 30 90\n60\n1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)\n0 %\n—\n31.12.2020\nex 2909 49 80\n10\n1-Propoxypropan-2-ol (CAS RN 1569-01-3)\n0 %\n—\n31.12.2020\nex 2911 00 00\n10\nEthoxy-2,2-difluoroethanol (CAS RN 148992-43-2)\n0 %\n—\n31.12.2020\nex 2914 50 00\n75\n7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)\n0 %\n—\n31.12.2020\nex 2915 90 70\n65\n2-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)\n0 %\n—\n31.12.2020\nex 2916 14 00\n30\nAllyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:\n0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),\n0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and\n0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5) (1)\n0 %\n—\n31.12.2020\n*ex 2916 39 90\n20\n3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)\n0 %\n—\n31.12.2018\nex 2916 39 90\n41\n4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)\n0 %\n—\n31.12.2020\nex 2916 39 90\n51\n3-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7)\n0 %\n—\n31.12.2020\nex 2916 39 90\n61\n2-Phenylbutyric Acid (CAS RN 90-27-7)\n0 %\n—\n31.12.2020\nex 2917 39 95\n25\nNaphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)\n0 %\n—\n31.12.2020\nex 2917 39 95\n35\n1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)\n0 %\n—\n31.12.2020\nex 2918 99 90\n13\n3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)\n0 %\n—\n31.12.2020\nex 2918 99 90\n18\nEthyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)\n0 %\n—\n31.12.2020\nex 2921 49 00\n60\n2,6-Diisopropylaniline (CAS RN 24544-04-5)\n0 %\n—\n31.12.2020\nex 2922 19 85\n35\n2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)\n0 %\n—\n31.12.2020\n*ex 2922 29 00\n63\nAclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more\n0 %\n—\n31.12.2020\nex 2922 39 00\n25\n3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)\n0 %\n—\n31.12.2020\nex 2922 39 00\n35\n5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)\n0 %\n—\n31.12.2020\nex 2922 49 85\n30\nAqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)\n0 %\n—\n31.12.2020\nex 2924 29 98\n61\n(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288-8)\n0 %\n—\n31.12.2020\nex 2924 29 98\n62\n2-Chlorobenzamide (CAS RN 609-66-5)\n0 %\n—\n31.12.2020\nex 2924 29 98\n64\nN-(3′,4′-dichloro-5-fluoro[1,1′-biphenyl]-2-yl)-acetamide (CAS RN 877179-03-8)\n0 %\n—\n31.12.2020\nex 2926 90 95\n14\nCyanoacetic acid (CAS RN 372-09-8)\n0 %\n—\n31.12.2020\nex 2926 90 95\n17\nCypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more\n0 %\n—\n31.12.2020\nex 2928 00 90\n23\nMetobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more\n0 %\n—\n31.12.2020\nex 2930 90 99\n19\nN-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N′-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)\n0 %\n—\n31.12.2020\nex 2930 90 99\n22\nTembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more\n0 %\n—\n31.12.2020\nex 2930 90 99\n26\nFolpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more\n0 %\n—\n31.12.2020\nex 2931 90 80\n60\n4-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1)\n0 %\n—\n31.12.2020\nex 2931 90 80\n63\nChloroethenyldimethylsilane (CAS RN 1719-58-0)\n0 %\n—\n31.12.2020\nex 2931 90 80\n65\nBis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)\n0 %\n—\n31.12.2020\nex 2931 90 80\n67\nDimethyltin dioleate (CAS RN 3865-34-7)\n0 %\n—\n31.12.2020\nex 2931 90 80\n70\n(4-Propylphenyl)boronic acid (CAS RN 134150-01-9)\n0 %\n—\n31.12.2020\nex 2932 19 00\n20\nTetrahydrofuran-borane (CAS RN 14044-65-6)\n0 %\n—\n31.12.2020\nex 2932 99 00\n65\n4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)\n0 %\n—\n31.12.2020\nex 2933 21 00\n55\n1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)\n0 %\n—\n31.12.2020\nex 2933 29 90\n65\n(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)\n0 %\n—\n31.12.2020\nex 2933 39 99\n13\nMethyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194-96-6)\n0 %\n—\n31.12.2020\nex 2933 39 99\n14\nN,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)\n0 %\n—\n31.12.2020\nex 2933 39 99\n16\nMethyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)\n0 %\n—\n31.12.2020\nex 2933 39 99\n17\n3,5-Dimethylpyridine (CAS RN 591-22-0)\n0 %\n—\n31.12.2020\nex 2933 39 99\n19\nMethyl nicotinate (INNM) (CAS RN 93-60-7)\n0 %\n—\n31.12.2020\nex 2933 39 99\n23\n2-Chloro-3-cyanopyridine (CAS RN 6602-54-6)\n0 %\n—\n31.12.2020\nex 2933 39 99\n26\n2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)\n0 %\n—\n31.12.2020\nex 2933 49 10\n50\n1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)\n0 %\n—\n31.12.2020\nex 2933 59 95\n18\n1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)\n0 %\n—\n31.12.2020\nex 2933 59 95\n21\nN-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)\n0 %\n—\n31.12.2020\nex 2933 69 80\n13\nMetribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more\n0 %\n—\n31.12.2020\nex 2933 69 80\n17\nBenzoguanamine (CAS RN 91-76-9)\n0 %\n—\n31.12.2020\nex 2933 99 80\n16\nPyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more\n0 %\n—\n31.12.2020\nex 2933 99 80\n17\nCarfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more\n0 %\n—\n31.12.2020\nex 2933 99 80\n21\n1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)\n0 %\n—\n31.12.2020\nex 2933 99 80\n26\n(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9)\n0 %\n—\n31.12.2020\nex 2933 99 80\n29\n3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7)\n0 %\n—\n31.12.2020\nex 2933 99 80\n31\nTriadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more\n0 %\n—\n31.12.2020\nex 2934 99 90\n36\nOxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more\n0 %\n—\n31.12.2020\nex 2934 99 90\n38\nClomazone (ISO) (CAS RN 81777-89-1) with a purity by weight of 96 % or more\n0 %\n—\n31.12.2020\nex 2934 99 90\n39\n4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)\n0 %\n—\n31.12.2020\nex 2934 99 90\n41\n11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)\n0 %\n—\n31.12.2020\nex 2934 99 90\n42\n1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)\n0 %\n—\n31.12.2019\nex 2934 99 90\n44\nPropiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more\n0 %\n—\n31.12.2020\nex 2935 00 90\n52\n(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2) (5)\n0 %\n—\n31.12.2020\nex 2935 00 90\n54\nPropoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more\n0 %\n—\n31.12.2020\nex 2935 00 90\n56\nN-(p-Toluenesulphonyl)-N′-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)\n0 %\n—\n31.12.2020\nex 2935 00 90\n57\nN-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)\n0 %\n—\n31.12.2020\nex 2935 00 90\n58\n1-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)\n0 %\n—\n31.12.2020\n*ex 2935 00 90\n59\nFlazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more\n0 %\n—\n31.12.2020\n*ex 3201 90 90\nex 3202 90 00\n40\n10\nReaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)\n0 %\n—\n31.12.2020\nex 3204 17 00\n16\nColourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a Colourant C.I. Pigment Red 49:2 content of 60 % or more by weight\n0 %\n—\n31.12.2020\n*ex 3212 10 00\nex 7607 20 90\nex 7616 99 90\n10\n30\n25\nMetallised film:\nconsisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,\nwith an optical density of each aluminium layer of not more than 3,0,\nwith each aluminium layer separated by a resin layer,\non a carrier film of PET, and\non rolls of up to 50 000 metres in length\n0 %\n—\n31.12.2019\nex 3507 90 90\n20\nCreatine amidinohydrolase (CAS RN 37340-58-2)\n0 %\n—\n31.12.2020\n*ex 3701 30 00\n30\nRelief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm\n0 %\n—\n31.12.2018\nex 3802 10 00\n10\nMixture of activated carbon and polyethylene, in form of powder\n0 %\n—\n31.12.2020\nex 3808 92 30\n10\nMancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more (2)\n0 %\n—\n31.12.2020\nex 3811 21 00\n12\nDispersing agent containing:\nesters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),\n35 % or more but not more than 55 % by weight of mineral oils and\nwith a chlorine content of not more than 0,05 % by weight,\nused in the manufacture of blends of additives for lubricating oils (1)\n0 %\n—\n31.12.2020\nex 3811 21 00\n14\nDispersing agent:\ncontaining polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),\ncontaining 35 % or more but not more than 55 % by weight of mineral oils,\nwith a chlorine content by weight of not more than 0,05 %,\nhaving a total base number of less than 15,\nused in the manufacture of blends of additives for lubricating oils (1)\n0 %\n—\n31.12.2020\nex 3811 21 00\n16\nDetergent containing:\nCalcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)\n40 % or more but not more than 60 % by weight of mineral oils and\nhaving a total base number more than 120\nused in the manufacture of blends of additives for lubricating oils (1)\n0 %\n—\n31.12.2020\nex 3811 21 00\n18\nDetergent containing:\nlong chain alkyltoluene calcium sulphonates,\nmore than 30 % but not more than 50 % by weight of mineral oils, and\nhaving a total base number of more than 310 but not more than 340,\nused in the manufacture of blends of additives for lubricating oils (1)\n0 %\n—\n31.12.2020\nex 3824 90 92\n21\nSolution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in Toluene\n0 %\n—\n31.12.2020\nex 3824 90 92\n22\nAqueous solution containing by weight\n38 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),\n21 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and\n1 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)\n0 %\n—\n31.12.2020\nex 3824 90 92\n23\nButylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol\n0 %\n—\n31.12.2020\n*ex 3901 10 10\n40\nLinear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with\nnot more than 5 % by weight of comonomer,\na melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and\na density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3\n0 %\nm3\n31.12.2018\nex 3901 90 90\n53\nCopolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with\nan acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and\na melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more\n0 %\nm3\n31.12.2020\nex 3901 90 90\n57\nOctene linear low-density polyethylene (LLDPE) in the form of pellets used in the co-extrusion processing of films for flexible food packaging with:\n10 % or more but not more than 20 % by weight of octene,\na melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),\na melt index (190 °C/2,16 kg) of 0,4 g/10 min but not more than 0,6 g/10 min,\na density (ASTM D4703) of 0,909 g/cm3 or more, but not more than 0,913 g/cm3,\na gel area per 24,6 cm3 of not more than 20 mm2; and\nan anti-oxidant level not exceeding 240 ppm\n0 %\nm3\n31.12.2020\nex 3901 90 90\n63\nOctene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:\nmore than 10 % but not more than 20 % by weight of copolymer,\na melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and\na density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3\nfor use in the co-extrusion processing of films for flexible food packaging (1)\n0 %\nm3\n31.12.2020\n*ex 3901 90 90\n65\nLinear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with\nmore than 5 %, but not more than 8 % by weight of comonomer,\na melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and\na density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3\n0 %\nm3\n31.12.2018\n*ex 3901 90 90\n67\nCopolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more\n0 %\n—\n31.12.2020\nex 3903 90 90\n46\nCopolymer in the form of granules containing by weight:\n74 % (± 4 %) styrene,\n24 % (± 2 %) n-butylacrylate and\n0,01 % or more but not more than 2 % methacrylic acid\n0 %\nm3\n31.12.2020\nex 3903 90 90\n70\nCopolymer in the form of granules containing by weight:\n75 % (± 7 %) styrene and\n25 % (± 7 %) methylmethacrylate\n0 %\nm3\n31.12.2020\nex 3907 10 00\n10\nMixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene\n0 %\n—\n31.12.2020\nex 3907 10 00\n20\nPolyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine\n0 %\n—\n31.12.2020\nex 3907 30 00\n15\nEpoxide resin, halogen-free,\ncontaining by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,\nnot containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and\ncontaining solvents\nfor use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits (1)\n0 %\n—\n31.12.2020\nex 3907 30 00\n25\nEpoxide resin\ncontaining by weight 21 % or more of brome,\nnot containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and\ncontaining solvents\n0 %\n—\n31.12.2020\n*ex 3907 40 00\n35\nα-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)\n0 %\n—\n31.12.2018\nex 3910 00 00\n15\nDimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated\n0 %\n—\n31.12.2020\nex 3919 10 80\n63\nReflecting film consisting of\na layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,\na layer of an acrylic resin having embedded glass beads,\na layer of an acrylic resin hardened by a melamine cross-linking agent,\na metal layer,\nan acrylic adhesive, and\na release film\n0 %\n—\n31.12.2020\n*ex 3919 10 80\nex 3919 90 00\n73\n50\nSelf-adhesive reflecting sheet whether or not in segmented pieces,\nwhether or not containing a watermark,\nwith or without an application tape coated on one side with an adhesive;\nthe reflective sheet consists of:\na layer of acrylic or vinyl polymer,\na layer of poly(methyl methacrylate) or polycarbonate containing microprisms,\na layer of metallisation,\nan adhesive layer, and\na release sheet\nwhether or not containing an additional layer of polyester\n0 %\n—\n31.12.2018\nex 3919 90 00\n52\nWhite polyolefin tape consisting of:\nan adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,\na polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, and\na non-silicone release layer with a thickness below 1 μm\n0 %\n—\n31.12.2020\n*ex 3919 90 00\n54\nPoly(vinyl chloride) film, whether or not covered on one side with a layer of polymer, with\nan acrylic adhesive with an adhesive strength of 70 N/m or more whether or not reduced upon irradiation,\na total thickness without release liner of 78 microns or more, and\na release liner, whether or not equipped with oblate spheres and on one side embossed\n0 %\n—\n31.12.2019\n*ex 3920 20 29\n60\nMono-axial oriented film, of a total thickness of not more than 75 μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:\na tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and\na tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa\nas determined by test method ASTM D882/ISO 527-3\n0 %\n—\n31.12.2018\n*ex 3920 20 29\n70\nMono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:\na thickness of 55 μm or more but not more than 97 μm,\na tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and\na tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa\n0 %\n—\n31.12.2019\n*ex 3920 99 59\n65\nFilm of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %\n0 %\n—\n31.12.2018\nex 3921 19 00\n40\nTransparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:\na width of 98 mm or more but not more than 170 mm,\na thickness of 15 μm or more but not more than 36 μm,\nof a kind used for the manufacture of alkaline battery separators\n0 %\n—\n31.12.2020\nex 3921 90 55\n50\nGlass fibre-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems (1)\n0 %\nm2\n31.12.2020\nex 4016 93 00\n20\nGasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle:\nwith a length of 72 mm or more but not more than 825 mm;\nwith a width of 18 mm or more but not more than 155 mm\n0 %\n—\n31.12.2020\nex 4104 41 51\n10\nCrust leather of zebu species or zebu-hybrid species with a unit surface area of more than 2,6 m2 and containing a hump hole of 450 cm2 or more but not more than 2 850 cm2, for use in the manufacture of raw material for seat covers of motor vehicles (1)\n0 %\n—\n31.12.2020\nex 5403 39 00\n10\nBiodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry (1)\n0 %\n—\n31.12.2020\n*ex 6804 21 00\n20\nDiscs\nof synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,\nhaving a self-sharpening effect by constant release of the diamonds,\nsuitable for abrasive cutting of wafers,\nwhether or not containing a hole in the centre,\nwhether or not on a support\nwith a weight of not more than 377 g per piece and\nwith an external diameter of not more than 206 mm\n0 %\np/st\n31.12.2019\n*ex 6813 89 00\n20\nFriction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components (1)\n0 %\n—\n31.12.2018\nex 7009 10 00\n40\nElectrochromic self-dimming inside rear-view mirror, consisting of:\na mirror support\na plastic casing and\nan integrated circuit\nfor use in the manufacture of motor vehicles of Chapter 87 (1)\n0 %\n—\n31.12.2020\n*ex 7616 99 10\nex 8708 99 97\n30\n50\nAluminium engine bracket, with dimensions of:\nheight of more than 10 mm but not more than 200 mm\nwidth of more than 10 mm but not more than 200 mm\nlength of more than 10 mm but not more than 200 mm\nequipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:\ninternal porosity not more than 1 mm;\nouter porosity not more than 2 mm;\nRockwell hardness HRB 10 or more\nof a kind used in the production of suspensions systems for engines in motor vehicles\n0 %\np/st\n31.12.2019\nex 8108 20 00\n40\nTitanium alloy ingot,\nwith a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,\na weight of 680 kg or more,\ncontaining alloy elements by weight of:\n3 % or more but not more than 6 % of aluminium\n2,5 % or more but not more than 5 % of tin\n2,5 % or more but not more than 4,5 % of zirconium\n0,2 % or more but not more than 1 % of niobium\n0,1 % or more but not more than 1 % of molybdenum\n0,1 % or more but not more than 0,5 % of silicon\n0 %\n—\n31.12.2020\nex 8108 20 00\n50\nTitanium alloy ingot,\nwith a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,\na weight of 680 kg or more,\ncontaining alloy elements by weight of:\n3 % or more but not more than 7 % of aluminium\n1 % or more but not more than 5 % of tin\n3 % or more but not more than 5 % of zinc\n4 % or more but not more than 8 % of molybdenum\n0 %\n—\n31.12.2020\nex 8108 20 00\n60\nTitanium alloy ingot,\nwith a diameter of 63,5 cm or more and a length of 450 cm or more,\na weight of 6 350 kg or more,\ncontaining alloy elements by weight of:\n5,5 % or more but not more than 6,7 % of aluminium,\n3,7 % of more but not more than 4,9 % of vanadium\n0 %\n—\n31.12.2020\nex 8113 00 90\n20\nCuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules\n0 %\n—\n31.12.2020\nex 8302 20 00\n20\nCastors, with\nan external diameter of 21 mm or more but not more than 23 mm,\na width with screw of 19 mm or more but not more than 23 mm,\na U-shaped plastic outer ring,\nan assembly screw fitted to the internal diameter and used as an inner ring\n0 %\np/st\n31.12.2020\n*ex 8407 90 10\n10\nFour-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508 (1)\n0 %\n—\n31.12.2016\n*ex 8408 90 43\nex 8408 90 45\nex 8408 90 47\n40\n30\n50\n4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:\na capacity of not more than 3 850 cm3, and\na rated output of 15 kW or more but not more than 85 kW,\nfor use in the manufacture of vehicles of heading 8427 (1)\n0 %\n—\n31.12.2017\nex 8415 90 00\n30\nAluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with:\na length of 166 mm (+/– 1 mm),\na diameter of 70 mm (+/– 1 mm),\nan internal capacity of 280 cm3 or more,\na water absorption rate of 17 g or more, and\nan internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2\nof a kind used in car air-conditioning systems\n0 %\np/st\n31.12.2020\nex 8415 90 00\n40\nFlame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems\n0 %\np/st\n31.12.2020\nex 8415 90 00\n50\nAluminium arc-welded removable receiver dryer with polyamide and ceramic elements with:\na length of 291 mm (+/– 1 mm),\na diameter of 32 mm (+/– 1 mm),\na spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm,\na solid particle diameter of not more than 0,06 mm\nof a kind used in car air-conditioning systems\n0 %\np/st\n31.12.2020\nex 8436 99 00\n10\nPart containing:\na single-phase AC motor,\nan epicyclic gearing,\na cutter blade\nand whether or not containing:\na capacitor,\na part fitted with a threaded bolt\nfor use in the manufacture of garden shredders (1)\n0 %\np/st\n31.12.2020\n*ex 8479 89 97\n15\nBioreactor for biopharmaceutical cell culture\nhaving interior surfaces of type 316L austenitic stainless steel\nwith a process capacity of 50 litres, 500 litres, 3 000 litres, 5 000 litres, 10 000 litres or 15 000 litres\nwhether or not combined with a ‘clean-in-process’ system and/or a dedicated paired media hold vessel\n0 %\np/st\n31.12.2019\n*ex 8482 10 10\nex 8482 10 90\n30\n20\nBall bearings:\nwith an internal diameter of 3 mm or more,\nwith an external diameter of not more than 100 mm,\nwith a width of not more than 40 mm,\nwhether or not equipped with a duster,\nfor use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears (1)\n0 %\np/st\n31.12.2019\nex 8501 10 10\n20\nSynchronous motor for a dishwasher with a water flow control mechanism with\na length without axle of 24 mm (+/– 0,3),\na diameter of 49,3 mm (+/– 0,3),\na rated voltage of 220 V AC or more but not more than 240 V AC,\na rated frequency of 50 Hz or more but not more than 60 Hz,\nan input power of not more than 4 W,\na rotation speed of 4 rpm or more but not more than 4,8 rpm,\nan output torque of not more than 10 kgf/cm\n0 %\n—\n31.12.2020\nex 8501 10 99\n55\nElectric turbocharger actuator, with:\na DC motor with an output of 10 W or more but not more than 15 W,\nan integrated gear mechanism,\na (pulling)force of 250 N or more at 160 °C elevated ambient temperature,\na (pulling) force of 250 N or more in each position of its stroke,\nan effective stroke of 15 mm or more but not more than 20 mm,\nwith or without an on-board diagnostics interface\n0 %\n—\n31.12.2020\nex 8501 10 99\n57\nDC motor:\nwith a rotor speed of not more than 6 500 rpm when not loaded;\nwith a rated voltage of 12,0 V (+/– 0,1);\nof a specified temperature range of – 40 °C or more, but not more than + 165 °C;\nwith or without a connecting pinion;\nwith or without an engine connector\n0 %\n—\n31.12.2020\nex 8501 31 00\nex 8501 32 00\n35\n70\nAutomotive-ready, brushless and permanently excited direct current motor with:\na specified speed of not more than 4 000 rpm,\na minimum output of 400 W, but not more than 1,3 kW (at 12 V),\na flange diameter of 90 mm or more, but not more than 150 mm,\na maximum length of 190 mm, measured from the beginning of the shaft to the outer ending,\na housing length of not more than 150 mm, measured from the flange to the outer ending,\na two-piece (basic housing including electric components and flange with minimum 2 and maximum 6 bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease),\na stator with single T-tooth design and single coil windings in 12/8 topology and\nsurface magnets\n0 %\n—\n31.12.2020\n*ex 8501 32 00\nex 8501 33 00\n60\n15\nTraction motor, with:\na torque output of 200 Nm or more but not more than 300 Nm\na power output of 50 kW or more but not more than 100 kW\na rated speed of not more than 12 500 rpm\nfor use in the manufacture of electric vehicles (1)\n0 %\n—\n31.12.2019\nex 8505 11 00\nex 8505 19 90\n55\n40\nFlat bars of an alloy of samarium and cobalt with\na length of 30,4 mm (± 0,05 mm);\na width of 12,5 mm (± 0,15 mm);\na thickness of 6,9 mm (± 0,05 mm), or composed of ferrites in the shape of a quarter sleeves with:\na length of 46 mm (± 0,75 mm);\na width of 29,7 mm (± 0,2 mm),\nintended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars\n0 %\np/st\n31.12.2020\nex 8506 50 10\n10\nLithium cylindrical primary cells with:\na diameter of 14,0 mm or more but not more than 26,0 mm;\na length of 25 mm or more but not more than 51 mm;\na voltage of 1,5 V or more, but not more than 3,6 V;\na capacity of 0,80 Ah or more, but not more than 5,00 Ah\nfor use in the manufacture of telemetry and medical devices, electronic meters or remote controls (1)\n0 %\n—\n31.12.2020\n*ex 8507 10 20\n30\nLead-acid accumulators or modules, with\na nominal capacity of not more 32 Ah,\na length of not more than 205 mm,\na width of not more than 130 mm and\na height of not more than 190 mm\nfor use in the manufacture of articles of heading 8711 (1)\n0 %\n—\n31.12.2018\n*ex 8507 60 00\n71\nLithium-ion rechargeable batteries, with:\na length of 700 mm or more, but not more than 2 820 mm\na width of 935 mm or more, but not more than 1 660 mm\na height of 85 mm or more, but not more than 700 mm\na weight of 280 kg or more, but not more than 700 kg\na power of not more than 130 kWh\n0 %\n—\n31.12.2017\n*ex 8508 70 00\nex 8537 10 99\n10\n96\nPrinted circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W\n0 %\np/st\n31.12.2020\nex 8512 20 00\n30\nLighting module, containing at least:\ntwo LEDs,\nglass or plastic lenses, focusing/scattering the light emitted by the LEDs,\nreflectors redirecting the light emitted by the LEDs,\nin an aluminium housing with a radiator, mounted at a bracket with an actuator\n0 %\np/st\n31.12.2020\n*ex 8512 20 00\n40\nFog lamp with a galvanised inner surface, containing:\na plastic holder with three or more brackets,\none or more 12 V bulbs,\na connector,\na plastic cover,\nwhether or not with a connection cable\nfor use in the manufacture of goods of Chapter 87 (1)\n0 %\np/st\n31.12.2019\nex 8512 30 90\n20\nWarning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:\na printed circuit board,\na connector,\nwhether or not a metal holder\nof a kind used in the manufacture of goods of chapter 87\n0 %\np/st\n31.12.2020\nex 8518 90 00\n60\nUpper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers\n0 %\n—\n31.12.2020\nex 8523 51 99\n10\nSD memory card with non-upgradable set of uploaded maps for incorporation into car navigation units (1)\n0 %\n—\n31.12.2020\n*ex 8525 80 19\n70\nLong wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:\na sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,\na resolution of up to 640 × 512 pixels,\na weight of not more than 400 g,\nmeasurements of not more than 70 mm × 86 mm × 82 mm,\nwhether or not in a housing\nwith automotive- qualified plug and\na deviation of the output signal over the entire work temperature range of not more than 20 %\n0 %\n—\n31.12.2019\n*ex 8529 90 92\n35\nLCD modules with:\na diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,\na LED backlight,\na printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components,\nan 8 pin plug for power supply and 4- pin LVDS interface,\nwhether or not in a housing,\nfor permanent incorporation or permanent mounting into motor vehicles of chapter 87 (1)\n0 %\n—\n31.12.2020\n*ex 8529 90 92\n36\nLCD module with:\na diagonal measurement of the screen of 14,5 cm or more but not more than 20,3 cm,\nor without a touch screen,\nan LED backlight,\na printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,\na 12 pin plug for power supply and CAN and LVDS interfaces,\nin a housing with monitor and other control functions,\nfor installation in motor vehicles of chapter 87 (1)\n0 %\n—\n31.12.2020\n*ex 8529 90 92\n55\nOLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors (1)\n0 %\np/st\n31.12.2019\nex 8529 90 92\n85\nColour LCD module in a housing:\nwith a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,\nwithout touch screen,\nwith a backlight and micro-controller,\nwith a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,\nwithout a signal processing module,\nwith control electronics for pixel addressing only,\nwith a motorised mechanism for moving the display screen,\nfor permanent installation in vehicles of Chapter 87 (1)\n0 %\np/st\n31.12.2020\n*ex 8535 90 00\n20\nPrinted circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back-light units for LCD modules (1)\n0 %\np/st\n31.12.2018\nex 8536 69 90\n60\nElectrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors (1)\n0 %\np/st\n31.12.2020\nex 8536 90 85\n20\nSemiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1 000 V\n0 %\np/st\n31.12.2020\nex 8536 90 85\n30\nRivet contacts\nof copper\nplated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken together\nwith a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)\n0 %\np/st\n31.12.2020\nex 8537 10 91\n50\nFuse control module in a plastic housing with mounting brackets comprising:\nsockets with or without fuses,\nconnecting ports,\na printed circuit board with embedded microprocessor, micro switch and relay\nof a kind used in the manufacture of goods of chapter 87\n0 %\np/st\n31.12.2020\n*ex 8537 10 91\nex 8537 10 99\n60\n45\nElectronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:\nan AC power input of 208 V or more but not more than 400 V,\na logic power input of 24 V DC,\nan automatic circuit breaker,\na main power switch,\ninternal or external electrical connectors and cables,\nin a housing with dimension of 281 mm × 180 mm × 75 mm or more, but not more than 630 mm × 420 mm × 230 mm,\nof a kind used for manufacturing recycling or sorting machines\n0 %\np/st\n31.12.2018\nex 8537 10 99\n35\nElectronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:\n2 rotary knobs\n27 or more pushbuttons\nLED lights\n2 integrated circuits for receiving and sending of control signals via the LIN-bus\n0 %\np/st\n31.12.2020\nex 8538 90 91\nex 8538 90 99\n20\n50\nInterior antenna for a car door locking system, comprising:\nan antenna module in a plastic housing,\na connection cable with a plug,\nat least two mounting brackets\nwhether or not PCB including integrated circuits, diodes and transistors\nof a kind used in the manufacture of goods of CN heading 8703\n0 %\np/st\n31.12.2020\nex 8544 30 00\nex 8544 42 90\n80\n60\nExtension two-core cable with two connectors, containing at least:\na rubber grommet,\na plastic conduit,\na metal attachment bracket\nof a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87\n0 %\np/st\n31.12.2020\nex 8544 42 90\n70\nElectric conductors:\nof a voltage of not more than 80 V,\nwith a length of not more than 120 cm,\nfitted with connectors,\nfor use in the manufacture of hearing aids, accessory kits and speech processors (1)\n0 %\np/st\n31.12.2020\nex 8544 49 93\n30\nElectric conductors:\nof a voltage of not more than 80 V,\nof a platinum-iridium-alloy,\ncoated with poly(tetrafluoroethylene),\nwithout connectors,\nfor use in the manufacture of hearing aids, implants and speech processors (1)\n0 %\nm\n31.12.2020\n*ex 8708 30 10\n20\nMotor powered brake actuation unit\nwith a rating of 13,5 V (± 0,5 V) and\na ball screw mechanism to control brake fluid pressure in the master cylinder\nfor use in the manufacture of electric motor vehicles (1)\n0 %\np/st\n31.12.2019\nex 8708 40 50\n10\nAutomatic hydrodynamic gearbox with a hydraulic torque converter without transfer box, cardan shaft and front differential for use in the manufacture of motor vehicles of Chapter 87 (1)\n0 %\np/st\n31.12.2020\nex 8708 50 55\n10\nCar axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703\n0 %\np/st\n31.12.2020\nex 8708 91 99\n30\nAluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:\nan insulating area flatness of not more than 0,1 mm,\na permissible particle quantity of 0,3 mg per tank,\na distance between pores of 2 mm or more,\npore sizes of not more than 0,4 mm, and\nnot more than 3 pores larger than 0,2 mm\nof a kind used in heat exchangers for car cooling systems\n0 %\np/st\n31.12.2020\nex 8714 10 90\n20\nRadiators of a kind used in motor bikes for fitting of attachments (1)\n0 %\np/st\n31.12.2020\n*ex 8714 91 30\nex 8714 91 30\nex 8714 91 30\n24\n34\n71\nFront forks with aluminium legs, for use in the manufacture of bicycles (1)\n0 %\n—\n31.12.2018\nex 8714 96 10\n10\nPedals, for use in the manufacture of bicycles (1)\n0 %\n—\n31.12.2020\nex 8714 99 90\n30\nSeat posts, for use in the manufacture of bicycles (1)\n0 %\np/st\n31.12.2020\n*ex 9001 50 41\nex 9001 50 49\n30\n30\nRound organic uncut corrective eyeglass lens, finished on both sides:\nof a diameter of 4,9 cm or more but not more than 8,2 cm,\nof a height of 0,5 cm or more but not more than 1,8 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre\nof a kind used to be processed in order to be adapted to a pair of glasses\n1,45 %\n—\n31.12.2019\n*ex 9001 50 80\n30\nRound organic uncut corrective eyeglass lens blanks, finished on one side:\nof a diameter of 5,9 cm or more but not more than 8,5 cm\nof a height of 1,2 cm or more but not more than 3,5 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre\nof a kind used to be processed in order to be adapted to a pair of glasses\n0 %\n—\n31.12.2019\nex 9002 11 00\nex 9002 19 00\n15\n10\nInfrared lens with motorised focus adjustment,\nusing wavelengths of 3 μm or more but not more than 5 μm,\nproviding a clear picture from 50 m to infinity,\nwith fields of vision sizes of 3° × 2,25° and 9° × 6,75°,\nwith a weight of not more than 230 g,\nwith a length of not more than 88 mm,\nwith a diameter of not more than 46 mm,\nathermalised,\nfor use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes (1)\n0 %\n—\n31.12.2020\n*ex 9025 80 40\n50\nElectronic semiconductor sensor for measuring at least two of the following quantities:\nAtmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,\nin a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:\none or more monolithic application-specific integrated circuits (ASIC),\none or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,\nof a kind used for incorporation into products of Chapters 84-90 and 95\n0 %\np/st\n31.12.2019\n*ex 9031 80 38\n15\nDevice for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of:\na monolithic integrated circuit in a housing, and\none or more discrete SMD capacitors connected in parallel to the integrated circuit\nwhether or not with integrated permanent magnets\nfor detecting the movement of a pulse generator\n0 %\np/st\n31.12.2018\n*ex 9031 80 38\n25\nElectronic semiconductor sensor for measuring acceleration and/or angular rate:\nwhether or not in combination with a magnetic field sensor;\nin a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:\none or more monolithic application-specific integrated circuits (ASIC),\none or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,\nwhether or not with an integrated microcontroller\nof a kind used for incorporation into products of Chapters 84-90 and 95\n0 %\np/st\n31.12.2019\n*ex 9401 90 80\n20\nSidemember with a thickness of 0,8 mm or more but not more than 3,0 mm, used in the manufacture of reclining car seats (1)\n0 %\np/st\n31.12.2018\nex 9607 20 10\n10\nSliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers (1)\n0 %\n—\n31.12.2020\nex 9607 20 90\n10\nNarrow strips mounted with plastic chain scoops for use in the manufacture of zippers (1)\n0 %\n—\n31.12.2020",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2016/1051/annex/I",
    "retrieved_at": "2026-11-01T14:45:44.084734+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}