OpenLegislation

Annex III

United Kingdom

Original text. Later amendments are not shown.

ANNEX VIIB

Graphite and raw, fabricated semi-finished metals referred to in Article 15a

HS Codes and descriptions

  1. 1..

    Raw or semi-fabricated graphite

    2504Natural graphite
    3801Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures
  2. 2..

    Corrosion-resistant high-grade steel (Chromium-content > 12 %) in form of sheet, plate, tube or bar

    ex 72 19Flat-rolled products of stainless steel, of a width of 600 mm or more
    ex 72 20Flat-rolled products of stainless steel, of a width of less than 600 mm
    ex 72 21Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
    ex 72 22Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
    ex 72 25Flat-rolled products of other alloy steel, of a width of 600 mm or more
    ex 72 26Flat-rolled products of other alloy steel, of a width of less than 600 mm
    ex 72 27Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
    ex 72 28Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
    ex 73 04Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
    ex 73 05Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel
    ex 73 06Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
    ex 73 07Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
  3. 3..

    Aluminium and alloys in form of sheet, plate, tube or bar

    ex 76 04Aluminium bars, rods and profiles
    ex 7604 10 10

    –

    Of aluminium, not alloyed

    – –

    Bars and rods

    ex 7604 29 10

    –

    Of aluminium alloys

    – –

    Hollow profiles

    – – –

    Bars and rods

    7606Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
    7608Aluminium tubes and pipes
    7609Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)
  4. 4..

    Titanium and alloys in form of sheet, plate, tube or bar

    ex 8108 90Titanium and articles thereof, including waste and scrap

    –

    Other
  5. 5..

    Nickel and alloys in form of sheet, plate, tube or bar

    ex 75 05Nickel bars, rods, profiles and wire
    ex 7505 11Bar and Rods
    ex 7505 12
    7506Nickel plates, sheets, strip and foil
    ex 75 07Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)
    7507 11

    –

    Tubes and pipes

    – –

    Of nickel, not alloyed

    7507 12

    –

    Tubes and pipes

    – –

    Of nickel alloys

    7507 20

    –

    Tube or pipe fittings

Explanatory note: the metal alloys in points 2, 3, 4 and 5 are those containing a higher percentage by weight of the stated metal than of any other element.