{
  "url": "https://openlegislation.uk/eu-regulation-2016-1825/annex",
  "json_url": "https://openlegislation.uk/eu-regulation-2016-1825/annex.json",
  "legislation": "eur/2016/1825",
  "legislation_title": "Commission Implementing Regulation (EU) 2016/1825 of 6 September 2016 amending Implementing Regulation (EU) No 901/2014 with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2016-1825",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "Implementing Regulation (EU) No 901/2014 is amended as follows:\n(1) Annex I is amended as follows:\n(a) in the list of Appendices, each of the following rows is inserted following their numerical order:\n‘\n5a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system\n8a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system\n9a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system\n9b\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, tell-tales and indicators system\n11a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system\n11b\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system\n13a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system\n20a\nModel information document relating to EU type-approval of a fuel tank as a STU\n’\n(b) in Part B, in point 2.2., in Table 1, in LIST I, the following row is inserted following its numerical order:\n‘\n5a\nSystem: maximum torque and a maximum net power of a propulsion unit\nX\nAppendix 2\n’\n(c) in Part B, in point 2.2., in Table 1, in LIST II, each of the following rows is inserted following their numerical order:\n‘\n8a\nSystem: installation of audible warning devices\nII\n9a\nSystem: installation of glazing, windscreen wipers and defrosting and demisting devices\nVII\n9b\nSystem: identification of controls, tell-tales and indicators\nVIII\n11a\nSystem: safety belt anchorages\nXII\n11b\nSystem: steer-ability, cornering properties and turn ability\nXIV\n13a\nSystem: vehicle occupant protection, including interior fittings, head restraint and vehicle doors\nXVII\n’\n(d) in Part B, in point 2.2., in Table 1, in LIST III, each of the following rows is inserted following their numerical order:\n‘\n20a\nSTU: fuel tank\nIX\n’\n(e) in Part B, in point 2.8., the table relating to information document data entries is amended as follows:\n(i) the following information document data entry 3.3.3.4. is inserted:\n‘\n3.3.3.4.\nL1e — L7e\n15/30(4) minutes power(27): …kW\n’\n(ii) the information document data entry 3.5.4. is replaced by the following:\n‘3.5.4.\nGear ratios\nL1e — L7e\nOverview gear ratios\nGear(24)\nInternal transmission ratios (ratios of engine to transmission output shaft revolutions)\nFinal drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions)\nTotal gear ratios\nRatio (engine speed/vehicle speed) for manual transmission only\n1\n2\n3\n…\nReverse\n’\n(iii) the information document data entry 4.0.1. is replaced by the following:\n‘\n4.0.1.\nL1e — L7e\nEnvironmental step: Euro …(3/4/5) (4)\n’\n(iv) the following information document data entries 4.0.2. to 4.0.5. are inserted:\n‘\n4.0.2.\nL1e — L7e\nFuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km\n4.0.3.\nL1e — L7e\nCO2 emissions(25): …g/km\n4.0.4.\nL1e — L7e\nEnergy consumption(25): …Wh/km\n4.0.5.\nL1e — L7e\nElectric range(25): …km\n’\n(f) Appendix 3 is amended as follows:\n(i) the information document data entry 4.0.1. is replaced by the following:\n‘\n4.0.1.\nL1e — L7e\nEnvironmental step: Euro …(3/4/5) (4)\n’\n(ii) the following information document data entries 4.0.2. to 4.0.5. are inserted:\n‘\n4.0.2.\nL1e — L7e\nFuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km\n4.0.3.\nL1e — L7e\nCO2 emissions(25): …g/km\n4.0.4.\nL1e — L7e\nEnergy consumption(25): …Wh/km\n4.0.5.\nL1e — L7e\nElectric range(25): …km\n’\n(g) Appendix 4 is amended as follows:\n(i) the information document data entries 4.0.2., 4.0.2.1. and 4.0.2.2. are deleted;\n(ii) the following information document data entries 4.0.6. and 4.0.6.1. are inserted:\n‘\n4.0.6.\nSound level\n4.0.6.1.\nL3e\nLimit value for Lurban (16): …dB(A)\n’;\n(h) the following Appendix 5a is inserted:\nAppendix 5a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n1.\nGENERAL CONSTRUCTION CHARACTERISTICS\n1.8.\nPropulsion unit performance\n1.8.1.\nL3e, L4e, L5e, L7e-A, L7e-B2\nDeclared maximum vehicle speed: …km/h\n1.8.2.\nL1e, L2e, L6e, L7e-B1, L7e-C\nMaximum design vehicle speed(22): …km/h and gear in which it is reached: …\n1.8.3.\nL1e — L7e\nMaximum net power combustion engine: …kW at …min-1 at A/F ratio: …\n1.8.4.\nL1e — L7e\nMaximum net torque combustion engine: …Nm at …min-1 at A/F ratio: …\n1.8.5.\nL1e — L7e\nMaximum continuous-rated power electric motor (15/30(4) minutes power(27)): …kW at …min-1\n1.8.6.\nL1e — L7e\nMaximum continuous-rated torque electric motor: …Nm at …min-1\n1.8.7.\nL1e — L7e\nMaximum continuous total power for propulsion(s): …kW at …min-1 at A/F ratio: …\n1.8.8.\nL1e — L7e\nMaximum continuous total torque for propulsion(s): …Nm at …min-1 at A/F ratio: …\n1.8.9.\nL1e — L7e\nMaximum peak power for propulsion(s): …kW at …min-1 at A/F ratio: …\n3.\nGENERAL POWERTRAIN CHARACTERISTICS\n3.2.\nCombustion engine\n3.2.1.\nSpecific engine information\n3.2.1.1.\nL1e — L7e\nNumber of combustion engines: …\n3.2.1.2.\nL1e — L7e\nWorking principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): …\n3.2.1.3.\nL1e — L7e\nCycle: four-stroke/two-stroke/rotary/other(4):\n3.2.1.4.\nL1e — L7e\nCylinders\n3.2.1.4.1.\nL1e — L7e\nNumber: …\n3.2.1.4.2.\nL1e — L7e\nArrangement(26): …\n3.2.1.4.3.\nL1e — L7e\nBore(12): …mm\n3.2.1.4.4.\nL1e — L7e\nStroke(12): …mm\n3.2.1.4.5.\nL1e — L7e\nNumber and configuration of stators in the case of rotary-piston engine: …\n3.2.1.4.6.\nL1e — L7e\nVolume of combustion chambers in the case of rotary-piston engine: …cm3\n3.2.1.4.7.\nL1e — L7e\nFiring order: …\n3.2.1.5.\nL1e — L7e\nEngine capacity(6): …cm3\n3.2.1.6.\nL1e — L7e\nVolumetric compression ratio(7): …\n3.3.\nPure electric and hybrid electric propulsion and control\n3.3.3.4.\nL1e — L7e\n15/30(4) minutes power(27): …kW\n(i) Appendix 6 is amended as follows:\n(i) the information document data entry 4.0.1. is replaced by the following:\n‘\n4.0.1.\nL1e — L7e\nEnvironmental step: Euro …(3/4/5) (4)\n’\n(ii) the following information document data entries 4.0.2. to 4.0.5. are inserted:\n‘\n4.0.2.\nL1e — L7e\nFuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km\n4.0.3.\nL1e — L7e\nCO2 emissions(25): …g/km\n4.0.4.\nL1e — L7e\nEnergy consumption(25): …Wh/km\n4.0.5.\nL1e — L7e\nElectric range(25): …km\n’\n(j) Appendix 7 is amended as follows:\n(i) the information document data entries 4.0.1. and 4.0.2. are replaced by the following:\n‘\n4.0.1.\nL1e — L7e\nEnvironmental step: Euro …(3/4/5) (4)\n4.0.2.\nL1e — L7e\nFuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km\n’\n(ii) the information document data entries 4.0.2.1. and 4.0.2.2. are deleted;\n(iii) the following information document data entries 4.0.3. to 4.0.6.1. are inserted:\n‘\n4.0.3.\nL1e — L7e\nCO2 emissions(25): …g/km\n4.0.4.\nL1e — L7e\nEnergy consumption(25): …Wh/km\n4.0.5.\nL1e — L7e\nElectric range(25): …km\n4.0.6.\nSound level\n4.0.6.1.\nL3e\nLimit value for Lurban (16): …dB(A)\n’\n(k) Appendix 8 is amended as follows:\n(i) the information document data entries 4.0.1. and 4.0.2. are replaced by the following:\n‘\n4.0.1.\nL1e — L7e\nEnvironmental step: Euro …(3/4/5) (4)\n4.0.2.\nL1e — L7e\nFuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km\n’\n(ii) the information document data entries 4.0.2.1. and 4.0.2.2. are deleted;\n(iii) the following information document data entries 4.0.3. to 4.0.6.1. are inserted:\n‘\n4.0.3.\nL1e — L7e\nCO2 emissions(25): …g/km\n4.0.4.\nL1e — L7e\nEnergy consumption(25): …Wh/km\n4.0.5.\nL1e — L7e\nElectric range(25): …km\n4.0.6.\nSound level\n4.0.6.1.\nL3e\nLimit value for Lurban (16): …dB(A)\n’;\n(l) the following Appendix 8a is inserted:\n‘Appendix 8a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n6.\nINFORMATION ON FUNCTIONAL SAFETY\n6.1.\nAudible warning devices\n6.1.1.\nL1e — L7e\nSummary description of device(s) used and their purpose: …\n6.1.2.\nL1e — L7e\nDrawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: …\n6.1.3.\nL1e — L7e\nDetails of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: …\n6.1.4.\nL1e — L7e\nElectrical/pneumatic circuit diagram: …\n6.1.4.1.\nL1e — L7e\nVoltage: AC/DC(4)\n6.1.4.2.\nL1e — L7e\nRated voltage or pressure: …\n6.1.5.\nL1e — L7e\nDrawing of the mounting device: …’;\n(m) the following Appendix 9a is inserted:\n‘Appendix 9a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n1.\nGENERAL CONSTRUCTION CHARACTERISTICS\n1.7.\nL4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C\nHand of drive: left/right/centre(4): …\n1.7.1.\nL1e — L7e\nVehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units(4): …\n3.\nGENERAL POWERTRAIN CHARACTERISTICS\n3.1\nManufacturer of the propulsion unit\n3.1.1.\nCombustion engine\n3.1.1.1.\nL1e — L7e\nManufacturer: …\n3.1.1.2.\nL1e — L7e\nEngine code (as marked on the engine or other means of identification): …\n3.1.2.\nElectric motor\n3.1.2.1.\nL1e — L7e\nManufacturer: …\n3.1.2.2.\nL1e — L7e\nElectric motor code (as marked on the engine or other means of identification): …\n3.1.3.\nHybrid application\n3.1.3.1.\nL1e — L7e\nManufacturer: …\n3.1.3.2.\nL1e — L7e\nApplication code (as marked on the engine or other means of identification): …\n3.2.\nCombustion engine\n3.2.1.\nSpecific engine information\n3.2.1.2.\nL1e — L7e\nWorking principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): …\n3.2.1.3.\nL1e — L7e\nCycle: four-stroke/two-stroke/rotary/other(4): …\n3.2.1.4.\nL1e — L7e\nCylinders\n3.2.1.4.1.\nL1e — L7e\nNumber: …\n3.2.1.4.2.\nL1e — L7e\nArrangement(26): …\n3.2.1.5.\nL1e — L7e\nEngine capacity(6): …cm3\n3.2.1.9.\nL1e — L7e\nNormal warm engine idling speed: …min-1\n3.2.3.\nFuel\n3.2.3.1.\nL1e — L7e\nFuel type: (9)\n3.2.3.2.\nL1e — L7e\nVehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4)\n3.2.10.\nPowertrain cooling system and control\n3.2.10.2.\nL1e — L7e\nCooling system: liquid: yes/no(4)\n3.2.10.2.2.\nL1e — L7e\nNominal setting of the engine temperature control mechanism: …\n3.2.10.2.3.\nL1e — L7e\nNature of liquid: …\n3.2.10.2.4.\nL1e — L7e\nCirculating pump(s): yes/no(4)\n3.2.10.2.4.1.\nL1e — L7e\nCharacteristics: …\n3.2.10.2.5.\nL1e — L7e\nDrive ratio(s): …\n3.2.10.2.6.\nL1e — L7e\nDescription of the fan and its drive mechanism: …\n3.2.10.3.\nL1e — L7e\nAir cooling: yes/no(4)\n3.2.10.3.3.\nL1e — L7e)\nFan: yes/no(4)\n3.2.10.3.3.1.\nL1e — L7e\nCharacteristics: …\n3.2.13.\nOther electrical systems and control than those intended for the electrical propulsion\n3.2.13.1.\nL1e — L7e\nRated voltage: …V, positive/negative ground(4)\n3.2.13.2.\nL1e — L7e\nGenerator: yes/no(4):\n3.2.13.2.1.\nL1e — L7e\nNominal output: …VA\n3.3.\nPure electric and hybrid electric propulsion and control\n3.3.3.\nElectric propulsion motor\n3.3.3.2.\nL1e — L7e\nType (winding, excitation): …\n3.3.3.3.\nL1e — L7e\nOperating voltage: …V\n3.3.4.\nPropulsion batteries\n3.3.4.1.\nL1e — L7e\nPrimary propulsion battery\n3.3.4.1.1.\nL1e — L7e\nNumber of cells: …\n3.3.4.1.2.\nL1e — L7e\nMass: …kg\n3.3.4.1.3.\nL1e — L7e\nCapacity: …Ah (Amp-hours) / …V\n3.3.4.1.5.\nL1e — L7e\nPosition in the vehicle: …\n3.3.4.2.\nL1e — L7e\nSecondary propulsion battery\n3.3.4.2.1.\nL1e — L7e\nNumber of cells: …\n3.3.4.2.2.\nL1e — L7e\nMass: …kg\n3.3.4.2.3.\nL1e — L7e\nCapacity: …Ah (Amp-hours) / …V\n3.3.4.2.5.\nL1e — L7e\nPosition in the vehicle: …\n3.3.5.\nHybrid electric vehicle\n3.3.5.1.\nL1e — L7e\nEngine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): …\n3.3.5.2.\nL1e — L7e\nCategory of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging:\n3.3.5.3.\nL1e — L7e\nOperating mode switch: with/without(4)\n3.3.5.4.\nL1e — L7e\nSelectable modes: yes/no(4)\n3.3.5.5.\nL1e — L7e\nPure fuel consuming: yes/no(4)\n3.3.5.6.\nL1e — L7e\nVehicle propelled with fuel cell: yes/no(4)\n3.3.5.7.\nL1e — L7e\nHybrid operation modes: yes/no(4) (if yes, short description): …\n3.3.6.\nEnergy storage device\n3.3.6.1.\nL1e — L7e\nDescription: (battery, capacitor, flywheel/generator)(4)\n3.3.6.2.\nL1e — L7e\nIdentification number: …\n* 3.3.6.3.\nL1e — L7e\nKind of electrochemical couple: …\n3.3.6.4.\nL1e — L7e\nEnergy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): …\n3.3.6.5.\nL1e — L7e\nCharger: on-board/external/without(4)\n3.4.\nOther engines, electric motors or combinations (specific information concerning the parts of these motors)\n3.4.1.\nCooling system (temperatures permitted by the manufacturer)\n3.4.1.1.\nL1e — L7e\nLiquid cooling: …\n3.4.1.1.1.\nL1e — L7e\nMaximum temperature at outlet: …K\n3.4.1.2.\nL1e — L7e\nAir cooling: …\n3.4.1.2.1.\nL1e — L7e\nReference point: …\n3.4.1.2.2.\nL1e — L7e\nMaximum temperature at reference point: …K\n6.\nINFORMATION ON FUNCTIONAL SAFETY\n6.5.\nGlazing, windscreen wipers and washers, and defrosting and demisting systems\n6.5.1.\nWindscreen\n6.5.1.1.\nL2e, L5e, L6e, L7e\nMaterials used: …\n6.5.1.2.\nL2e, L5e, L6e, L7e\nMethod of mounting: …\n6.5.1.3.\nL2e, L5e, L6e, L7e\nAngle of inclination: …\n6.5.1.4.\nL2e, L5e, L6e, L7e\nWindscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: …\n6.5.1.5.\nL2e, L5e, L6e, L7e\nDrawing of the windscreen with dimensions: …\n6.5.2.\nOther windows\n6.5.2.1.\nL2e, L5e, L6e, L7e\nMaterials used: …\n6.5.2.2\nL2e, L5e, L6e, L7e\nA brief description of the electrical/electronic components (if any) of the window lifting mechanism: …\n6.5.3.\nOpening roof glazing\n6.5.3.1.\nL2e, L5e, L6e, L7e\nMaterials used: …\n6.5.4.\nOther glass panes\n6.5.4.1.\nL2e, L5e, L6e, L7e\nMaterials used: …\n6.6.\nWindscreen wiper(s)\n6.6.1.\nL2e, L5e, L6e, L7e\nDetailed technical description (including photographs or drawings): …\n6.7.\nWindscreen washer\n6.7.1.\nL2e, L5e, L6e, L7e\nDetailed technical description (including photographs or drawings): …\n6.7.2.\nL2e, L5e, L6e, L7e\nCapacity of the reservoir: …l\n6.8.\nDefrosting and demisting\n6.8.1.\nL2e, L5e, L6e, L7e\nDetailed technical description (including photographs or drawings): …\n6.16.\nSeating positions (saddles and seats)\n6.16.1.\nL1e — L7e\nNumber of seating positions: …\n6.16.1.1.\nL2e, L5e, L6e, L7e\nLocation and arrangement(8): …\n6.16.4.\nL2e, L4e, L5e-B, L6e-B, L7e\nCoordinates or drawing of the R-point(s) of all seating positions: …\n6.16.4.1.\nL2e, L4e, L5e-B, L6e-B, L7e\nDriver's seat: …\n6.16.5.\nL1e — L7e\nDesign torso angle: …\n6.16.5.1.\nL1e — L7e\nDriver's seat: …\n6.20.\nVehicle occupant protection, including interior fittings and vehicle doors\n6.20.1.\nBodywork\n6.20.1.1.\nL2e, L5e-B, L6e-B, L7e\nMaterials used and methods of construction: …\n6.20.2.\nOccupant doors, latches and hinges\n6.20.2.1.\nL2e, L5e, L6e, L7e\nNumber of doors, and its configuration, dimensions and maximum angle of opening(5): …\n6.20.3.\nInterior protection for occupants)\n6.20.3.1.\nL2e, L5e, L6e, L7e\nPhotographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …’;\n(n) the following Appendix 9b is inserted:\n‘Appendix 9b\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, te ll-tales and indicators system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n1.\nGENERAL CONSTRUCTION CHARACTERISTICS\n1.7.\nL4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C\nHand of drive: left/right/centre(4): …\n6.9.\nDriver-operated controls including identification of controls, tell-tales and indicators\n6.9.1.\nL1e — L7e\nArrangement and identification of controls, tell-tales and indicators: …\n6.9.2.\nL1e — L7e\nPhotographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: …\n6.9.3.\nL1e — L7e\nControls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose:\n6.9.4.\nL1e — L7e\nSummary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales(4)\nControls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose\n(+) x yes\n- no or not separately available\no optional.\n(++) d directly on control, indicator or tell-tale\nc in close vicinity.\nSymbol No\nDevice\nControl / indicator available\nIdentified by symbol\nWhere\nTell-tale available\nIdentified by symbol\nWhere\n1\nMaster light\n2\nDipped-beam head lamps\n3\nMain-beam head lamps\n4\nPosition (side) lamps\n5\nFront fog lamps\n6\nRear fog lamp\n7\nHeadlamp levelling device\n8\nParking lamps\n9\nDirection indicators\n10\nHazard warning\n11\nWindscreen wiper\n12\nWindscreen washer\n13\nWindscreen wiper and washer\n14\nHeadlamp cleaning device\n15\nWindscreen demisting and defrosting\n16\nRear window demisting and defrosting\n17\nVentilating fan\n18\nDiesel pre-heat\n19\nChoke\n20\nBrake failure\n21\nFuel level\n22\nBattery charging condition\n23\nEngine coolant temperature\n24\nMalfunction indicator light (MI)\n6.9.5.\nL1e — L7e\nControls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified\n(+) x yes\n- no or not separately available\no optional.\n(++) d directly on control, indicator or tell-tale\nc in close vicinity.’;\nSymbol No\nDevice\nControl / indicator available\nIdentified by symbol\nWhere\nTell-tale available\nIdentified by symbol\nWhere\n1\nParking brake\n2\nRear window wiper\n3\nRear window washer\n4\nRear window wiper and washer\n5\nIntermittent windscreen wiper\n6\nAudible warning device (horn)\n7\nFront hood (bonnet)\n8\nRear hood (boot)\n9\nSeat belt\n10\nEngine oil pressure\n11\nUnleaded petrol\n12\n…\n13\n…\n(o) the following Appendix 11a is inserted:\n‘Appendix 11a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n1.\nGENERAL CONSTRUCTION CHARACTERISTICS\n1.4.\nL1e — L7e\nChassis (if any) (overall drawing): …\n1.5.\nL2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C\nMaterial used for the bodywork: …\n1.7.\nL4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C\nHand of drive: left/right/centre(4): …\n6.\nINFORMATION ON FUNCTIONAL SAFETY\n6.14.\nSafety belts and/or other restraints\n6.14.1.\nL2e, L4e, L5e-B, L6e-B, L7e\nNumber and position of safety belts and restraint systems and seats on which they can be used, please fill out table below:\n(L = left side, R = right side, C = centre)\nSafety belt configuration and associated information\nL = left, C = centre, R = right\nComplete EU type-approval mark\nVariant, if applicable\nBelt adjustment device for height (indicate yes/no/optional)\nFirst row of seats\nL\nC\nR\nSecond row of seats\nL\nC\nR\n6.14.2.\nL2e, L4e, L5e-B, L6e-B, L7e\nDescription of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: …\n6.14.3.\nL2e, L4e, L5e-B, L6e-B, L7e\nNumber and location of the anchorages: …\n6.14.4.\nL2e, L4e, L5e-B, L6e-B, L7e\nBrief description of electrical/electronic components: …\n6.15.\nSafety belt anchorages\n6.15.1.\nL2e, L4e, L5e-B, L6e-B, L7e\nPhotographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …\n6.15.2.\nL2e, L4e, L5e-B, L6e-B, L7e\nDrawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): …\n6.15.3.\nL2e, L4e, L5e-B, L6e-B, L7e\nDesignation of the types of belts(14) authorised for attachment to the anchorages on the vehicle: …\nSafety-belt anchorage configuration and associated information\nAnchorage location\nVehicle structure\nSeat structure\nFirst row of seats\nRight-hand seat\nLower anchorages\nUpper anchorages\noutboard inboard\nCentre seat\nLower anchorages\nUpper anchorages\nright left\nLeft-hand seat\nLower anchorages\nUpper anchorages\noutboard inboard\nSecond row of seats\nRight-hand seat\nLower anchorages\nUpper anchorages\noutboard inboard\nCentre seat\nLower anchorages\nUpper anchorages\nright left\nLeft-hand seat\nLower anchorages\nUpper anchorages\noutboard inboard\n6.15.4.\nL2e, L4e, L5e-B, L6e-B, L7e\nType-approval mark for each position: …\n6.15.5.\nL2e, L4e, L5e-B, L6e-B, L7e\nSpecial devices (example: seat-height adjustment, preloading device, etc.): …\n6.15.6.\nL2e, L4e, L5e-B, L6e-B, L7e\nPhotographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …\n6.15.7.\nL2e, L4e, L5e-B, L6e-B, L7e\nObservation: …’;\n(p) the following Appendix 11b is inserted:\n‘Appendix 11b\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n1.\nGENERAL CONSTRUCTION CHARACTERISTICS\n1.1.\nL1e — L7e\nPhotographs and/or drawings of a representative vehicle: …\n1.3.\nL1e — L7e\nNumber of axles and wheels: …\n1.3.1.\nL1e — L7e\nAxles with twinned wheels(23): …\n1.3.2.\nL1e — L7e\nPowered axles(23): …\n1.7.\nL4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C\nHand of drive: left/right/centre(4): …\n1.8.\nPropulsion unit performance\n1.8.1.\nL3e, L4e, L5e, L7e-A, L7e-B2\nDeclared maximum vehicle speed: …km/h\n1.8.2.\nL1e, L2e, L6e, L7e-B1, L7e-C\nMaximum design vehicle speed(22): …km/h and gear in which it is reached: …\n2.\nMASSES AND DIMENSIONS\n(in kg and mm.) refer to drawings where applicable\n2.1\nRange of vehicle mass (overall)\n2.1.3.\nL1e — L7e\nTechnically permissible maximum laden mass: …kg\n2.1.3.1.\nL1e — L7e\nTechnically permissible maximum mass on front axle: …kg\n2.1.3.2.\nL1e — L7e\nTechnically permissible maximum mass on rear axle: …kg\n2.1.3.3.\nL4e\nTechnically permissible maximum mass on sidecar axle: …kg\n2.2.\nRange of vehicle dimensions (overall)\n2.2.1.\nL1e — L7e\nLength: …mm\n2.2.2.\nL1e — L7e\nWidth: …mm\n2.2.3.\nL1e — L7e\nHeight: …mm\n2.2.4.\nL1e — L7e\nWheelbase: …mm\n2.2.4.1.\nL4e\nWheelbase sidecar(28): …mm\n2.2.5.\nTrack width\n2.2.5.1.\nL1e — L7e if equipped with twinned wheels L2e, L4e, L5e, L6e, L7e\nTrack width front: …mm.\n2.2.5.2.\nL1e — L7e if equipped with twinned wheels\nTrack width rear: …mm.\n2.2.5.3.\nL2e, L4e, L5e, L6e, L7e\nTrack width sidecar: …mm.\n2.2.6.\nL7e-B\nFront overhang: …mm.\n2.2.7.\nL7e-B\nRear overhang: …mm.\n3.\nGENERAL POWERTRAIN CHARACTERISTICS\n3.5.\nDrive-train and control(13)\n3.5.1.\nL1e — L7e\nBrief description and schematic drawing of the vehicle drive-train and its control system (gear shift control, clutch control or any other element of drive-train): …\n3.6.\nSafe-cornering device\n3.6.1.\nL1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e\nSafe-cornering device (Annex VIII to Regulation (EU) No 168/2013: yes/no(4); differential/other(4)\n3.6.2.\nL1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e\nDifferential lock: yes/no/optional(4)\n3.6.3.\nL1e — L7e\nBrief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: …\n3.7.\nSuspension and control\n3.7.1.\nL1e — L7e\nBrief description and schematic drawing of suspension and its control system: …\n6.\nINFORMATION ON FUNCTIONAL SAFETY\n6.17.\nSteer-ability, cornering properties and turn-ability\n6.17.1.\nL1e — L7e\nSchematic diagram of steered axle(s) showing steering geometry: …\n6.17.2.\nTransmission and control of steering\n6.17.2.1.\nL1e — L7e\nConfiguration of steering transmission (specify for front and rear): …\n6.17.2.2.\nL1e — L7e\nLinkage to wheels (including other than mechanical means; specify for front and rear): …\n6.17.2.2.1.\nL1e — L7e\nA brief description of the electrical/electronic components: …\n6.17.2.3.\nL1e — L7e\nDiagram of the steering transmission: …\n6.17.2.4.\nL2e, L5e, L6e, L7e\nSchematic diagram(s) of the steering control(s): …\n6.17.2.5.\nL2e, L5e, L6e, L7e\nRange and method of adjustment of the steering control(s): …\n6.17.2.6.\nL2e, L5e, L6e, L7e\nMethod of assistance: …\n6.17.3.\nMaximum steering angle of the wheels\n6.17.3.1.\nL1e — L7e\nTo the right: …degrees; number of turns of the steering wheel (or equivalent data): …\n6.17.3.2.\nL1e — L7e\nTo the left: …degrees; number of turns of the steering wheel (or equivalent data): …\n6.18.\nTyres/wheels combination\n6.18.1.\nTyres:\n6.18.1.1.\nSize designation\n6.18.1.1.1.\nL1e — L7e\nAxle 1: …\n6.18.1.1.2.\nL1e — L7e\nAxle 2: …\n6.18.1.1.3.\nL4e\nSidecar wheel: …\n6.18.1.4.\nL1e — L7e\nTyre pressure(s) as recommended by the vehicle manufacturer: …kPa’;\n(q) the following Appendix 13a is inserted:\n‘Appendix 13a\nModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n1.\nGENERAL CONSTRUCTION CHARACTERISTICS\n1.7.\nL4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C\nHand of drive: left/right/centre(4): …\n6.\nINFORMATION ON FUNCTIONAL SAFETY\n6.16.\nSeating positions (saddles and seats)\n6.16.1.\nL1e — L7e\nNumber of seating positions: …\n6.16.1.1.\nL2e, L5e, L6e, L7e\nLocation and arrangement(8): …\n6.16.2.\nL1e — L7e\nSeating position configuration: seat/saddle(4)\n6.16.3.\nL1e — L7e\nDescription and drawings of:\n6.16.3.1.\nL1e — L7e\nThe seats and their anchorages: …\n6.16.3.2.\nL1e — L7e\nThe adjustment system: …\n6.16.3.3.\nL1e — L7e\nThe displacement and locking systems: …\n6.16.3.4.\nL1e — L7e\nThe seat-belt anchorages incorporated in the seat structure: …\n6.16.3.5.\nL1e — L7e\nThe parts of the vehicle used as anchorages: …\n6.16.4.\nL2e, L4e, L5e-B, L6e-B, L7e\nCoordinates or drawing of the R-point(s) of all seating positions: …\n6.16.4.1.\nL2e, L4e, L5e-B, L6e-B, L7e\nDriver's seat: …\n6.16.4.2.\nL2e, L4e, L5e-B, L6e-B, L7e\nAll other seating positions: …\n6.16.5.\nL1e — L7e\nDesign torso angle: …\n6.16.5.1.\nL1e — L7e\nDriver's seat: …\n6.16.5.2.\nL1e — L7e\nAll other seating positions: …\n6.20.\nVehicle occupant protection, including interior fittings and vehicle doors\n6.20.1.\nBodywork\n6.20.1.1.\nL2e, L5e-B, L6e-B, L7e\nMaterials used and methods of construction:\n6.20.2.\nOccupant doors, latches and hinges\n6.20.2.1.\nL2e, L5e, L6e, L7e\nNumber of doors, and its configuration, dimensions and maximum angle of opening(5): …\n6.20.2.2.\nL2e, L5e, L6e, L7e\nDrawing of latches and hinges and of their position in the doors: …\n6.20.2.3.\nL2e, L5e, L6e, L7e\nTechnical description of latches and hinges: …\n6.20.2.4.\nL2e, L5e, L6e, L7e\nDetails, including dimensions, of entrances, steps and necessary handles where applicable: …\n6.20.3.\nInterior protection for occupants)\n6.20.3.1.\nL2e, L5e, L6e, L7e\nPhotographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …\n6.20.4.\nHead restraints\n6.20.4.1.\nL2e, L5e, L6e, L7e\nHead restraints: integrated/detachable/separate(4)\n6.20.4.2.\nL2e, L5e, L6e, L7e\nDetailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: …\n6.20.4.3.\nL2e, L5e, L6e, L7e\nIn the case of a ‘separate’ head restraint\n6.20.4.3.1.\nL2e, L5e, L6e, L7e\nDetailed description of the structural zone to which the head restraint is intended to be fixed: …\n6.20.4.3.2.\nL2e, L5e, L6e, L7e\nScale drawings of the significant parts of the structure and the head restraint: …’;\n(r) the following Appendix 20a is inserted:\n‘Appendix 20a\nModel information document relating to EU type-approval of a fuel tank as a STU\nOJ L 120, 7.5.2011, p. 1.\nOJ L 72, 14.3.2008, p. 1.’\nItem No.\n(Sub) categories\nDetailed information\nB.\nGeneral information concerning systems, components or separate technical units\n0.7.\nL1e — L7e\nMake(s) (trade name(s) of manufacturer): …\n0.8.\nL1e — L7e\nType: …\n0.8.1.\nL1e — L7e\nCommercial name(s) (if available): …\n0.8.2.\nL1e — L7e\nType-approval number(s) (if available): …\n0.8.3.\nL1e — L7e\nType-approval(s) issued on (date, if available): …\n0.9.\nCompany name and address of manufacturer: …\n0.9.1.\nL1e — L7e\nName(s) and address(es) of assembly plants: …\n0.9.2.\nL1e — L7e\nName and address of manufacturer's authorised representative, if any: …\n0.10.\nVehicle(s) for which the separate technical unit is intended for(21):\n0.10.1.\nL1e — L7e\nType(17): …\n0.10.2.\nL1e — L7e\nVariant(17): …\n0.10.3.\nL1e — L7e\nVersion(17): …\n0.10.4.\nL1e — L7e\nCommercial name(s) (if available): …\n0.10.5.\nL1e — L7e\nCategory, subcategory and sub-subcategory of vehicle(2): …\nC.\nGeneral information concerning vehicle, systems, components or separate technical units\n0.12.\nConformity of production\n0.12.1.\nL1e — L7e\nDescription of overall quality-assurance management systems.\n4.\nGENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE\n4.3.\nEvaporative emission control system\n4.3.7.\nL1e — L7e\nSchematic drawing of the fuel tank, indicating capacity and material:\n7.\nINFORMATION ON VEHICLE CONSTRUCTION\n7.5.\nFuel storage\n7.5.1.1.\nFuel tank\n7.5.1.1.1.\nL1e — L7e\nMaximum capacity: …\n7.5.1.1.2.\nL1e — L7e\nMaterials used: …\n7.5.1.1.3.\nL1e — L7e\nFuel tank inlet: restricted orifice/label(4)…\n7.5.1.3.\nL1e — L7e\nDrawing and technical description of the tank with connections and lines of the breathing and venting system, locks, valves, fastening devices: …\n7.5.2.\nCompressed natural gas (CNG) container\n7.5.2.1.\nL1e — L7e\nApplicable information document set out in UNECE regulation No 110 as prescribed for vehicle category M1 shall supplement this information document with regards to the CNG container and related equipment.\n7.5.3.\nL1e — L7e\nLiquefied petroleum gas (LPG)container(s)\n7.5.3.1.\nL1e — L7e\nApplicable information document set out in UNECE regulation No 67 as prescribed for vehicle category M1 shall supplement this information document with regards to the LPG container and related equipment.\n(s) Appendix 24 is replaced by the following:\nAppendix 24\nManufacturer's declaration for vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa\nManufacturer's declaration of conversion of (L3e/L4e)-A2 to (L3e/L4e)-A3 motorcycle characteristics and vice-versa\nA duly-completed version of this statement shall be included in the information folder.\nThe undersigned: […(full name and position)]\n0.4.\nCompany name and address of manufacturer: …\n0.4.2.\nName and address of the manufacturer's representative (if any)(0): …\nDeclares that\nThe (L3e/L4e)-A2 or (L3e/L4e)-A3(1) motorcycle:\n0.2.\nType(4): …\n0.2.1.\nVariant(s)(4): …\n0.2.2.\nVersion(s)(4): …\n0.2.3\nCommercial name(s) (if available): …\n0.3.\nCategory, subcategory and sub-subcategory of vehicle(5): …\n1.\nType-approval number (if available): …\n1.1.\nType-approval issued on (date, if available): …\n3.2.2.1.\nPCUs/ECUs(1) software identification number(s): …and calibration verification number(s): …\nis technically suitable to be retrofitted to the (L3e/L4e)-A2 or (L3e/L4e)-A3(1) vehicle identified below:\n0.2.\nType(4): …\n0.2.1.\nVariant(s)(4): …\n0.2.2.\nVersion(s)(4): …\n0.2.3\nCommercial name(s) (if available): …\n0.3.\nCategory, subcategory and sub-subcategory of vehicle(5): …\n1.\nType-approval number (if available): …\n1.1.\nType-approval issued on (date, if available): …\n3.2.2.1.\nPCUs/ECUs(1) software identification number(s): …and calibration verification number(s): …\nWith the following technical characteristics:\nGeneral construction characteristics(3)\n1.8.\nMaximum design vehicle speed: …km/h\n1.9.\nMaximum net power: …kW (at …min-1)(1)\n1.10.\nRatio maximum net power/mass of the vehicle in running order: …kW/kg\nEnvironmental performance(3)\n4.0.6.\nSound level measured according to(2): …\n4.0.6.1.\nStationary: …dB(A) at engine speed: …min-1\n4.0.6.2.\nDrive-by: …dB(A)\n4.0.6.3.\nLimit value for Lurban (0)(7): …dB(A)\n3.2.15.\nExhaust emissions measured according to(2): …\n3.2.15.1.\nType I test: tailpipe emissions after cold start, including the deterioration factor:\nCO: …mg/km\nTHC: …mg/km\nNMHC(0): …mg/km\nNOx: …mg/km\nTHC+NOx(0): …mg/km\nPM(0): …mg/km\n8.7.3.2.\nType II test: tailpipe emissions at (increased) idle and free acceleration:\nHC: …ppm at normal idling speed and: …ppm at high idle speed\nCO: …% vol. at normal idling speed and: …% vol. at high idle speed\n8.7.3.2.1.\nSmoke corrected absorption coefficient: …m–1\nEnergy efficiency measured according to(2)(3):\n4.0.2.\nFuel consumption(0)(6): …l or kg/100 km\n4.0.3.\nCO2 emissions(0)(6): …g/km\n4.0.4.\nEnergy consumption(0)(6): …Wh/km\n4.0.5.\nElectric range(0): …km\nby modifying the following components, parts, software, etc.: …\n…\nPlace: …\nDate: …\nSignature: …\nName and position in the company: …\nExplanatory notes relating to Appendix 24\n(Footnotes and explanations not to be stated on the Manufacturer's declaration)\n(0)\nSuppress the entry if not applicable.\n(1)\nDelete where not applicable (no deletion required when more than one entry is applicable).\n(2)\nNumber of the Commission Delegated Regulation and latest amending Commission Delegated Regulation applicable to the type-approval. In the case of a Commission Delegated Regulation with two or more implementation stages; indicate also the implementation stage and/or code. Alternatively indicate the number of the applicable UNECE Regulation.\n(3)\nRound the units of measure to the nearest whole number for dB(A), Wh/ km, mg/ km, g/km, ppm and km; to the nearest tenth for kW, l/ 100 km, kg/ 100 km, m3/ 100 km and for % vol; and to the nearest hundredth for kW/ kg and for m–1.\n(4)\nIndicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I.\n(5)\nClassified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A2’ for a medium-performance motorcycle.\n(6)\nFor externally chargeable hybrid electric vehicles, the “weighted, combined” values for CO2, fuel consumption and electric energy consumption shall be indicated.\n(7)\nOnly applicable for vehicle category L3e.\n(t) the explanatory notes relating to Annex I are amended as follows:\n(i) explanatory note (16) is replaced by the following:\n‘(16)\nRounded to the nearest whole number for dB(A).’;\n(ii) explanatory note (24) is replaced by the following:\n‘(24)\nFor vehicles equipped with CVT indicate the following: 1 “gear ratio at maximum design vehicle speed”; 2 “gear ratio at maximum peak power”; 3 “gear ration at maximum peak torque”. The gear ratios shall include the gear ratio of the primary transmission ratio (if applicable) and be supplemented with an acceptable tolerance band to the satisfaction of the approval authority. For wheel hub engines without gear drive, indicate “n/a” or “1”.’.\n(2) Annex IV is amended as follows:\n(a) Appendix 1 is amended as follows:\n(i) in MODEL A — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;\n(ii) in MODEL B — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;\n(iii) in MODEL C — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;\n(iv) in Section 2, the heading ‘Section 2’ is replaced by the following:\n‘ SECTION 2(O) ’;\n(v) in Section 2, entry 4.0.1. is replaced by the following:\n‘\n4.0.1.\nEnvironmental step: Euro …(3/4/5) (1)\n’\n(vi) in Section 2, entries 4.0.2., 4.0.2.1. and 4.0.2.2. are deleted;\n(vii) in Section 2, the following entries 4.0.6. to 4.0.6.3. are inserted after entry 4.0.1.:\n‘\n4.0.6.\nSound level measured according to(m):\n4.0.6.1.\nStationary: …dB(A) (CV*: …dB(A))(3i) at engine speed: …min-1 (CV*: …min-1)(3i)\n4.0.6.2.\nDrive-by: …dB(A) (CV*: …dB(A))(3i)\n4.0.6.3.\nLimit value for Lurban (3r): …dB(A) (CV*: …dB(A))(3i)\n’;\n(viii) in Section 2, entry 3.2.15.1. is replaced by the following:\n‘\n3.2.15.1.\nType I test: tailpipe emissions after cold start, including the deterioration factor, if applicable:\nCO:\nmg/km\n(CV*:… mg/km)(3i)\nTHC:\nmg/km\n(CV*:… mg/km)(3i)\nNMHC:\nmg/km (3)\n(CV*:… mg/km)(3i)\nNOx:\nmg/km\n(CV*:… mg/km)(3i)\nTHC+NOx:\nmg/km(3)\n(CV*:… mg/km)(3i)\nPM:\nmg/km(3)\n(CV*:… mg/km)(3i)\n’\n(ix) in Section 2, the heading ‘Energy efficiency’, including all its entries, is replaced by the following:\n‘ Energy efficiency(m)(o):\n4.0.2.\nFuel consumption(3)(q):\nl or kg/100 km\n(CV*:… l or kg/100 km)(3)(q)(3i)\n4.0.3.\nCO2 emissions(3)(q)(n):\ng/km\n(CV*:… g/km)(3)(q)(3i)\n4.0.4.\nEnergy consumption(3)(q):\nWh/km\n(CV*:… Wh/km)(3)(q)(3i)\n4.0.5.\nElectric range(3):\nkm\n(CV*:… km)(3)(3i)\n’\n(b) Appendix 2 is amended as follows:\n(i) entry 0.3. is replaced by the following:\n‘\n0.3.\nCategory, subcategory and sub-subcategory of vehicle(6)(u):…\n’\n(ii) the heading ‘Energy efficiency’, including all its entries, is replaced by the following:\n‘ Energy efficiency:\n4.0.2.\nFuel consumption(3)(q):\nl or kg/100 km\n(CV*:… l or kg/100 km)(3)(q)(3i)\n4.0.3.\nCO2 emissions(3)(q)(n):\ng/km\n(CV*:… g/km)(3)(q)(3i)\n4.0.4.\nEnergy consumption(3)(q):\nWh/km\n(CV*:… Wh/km)(3)(q)(3i)\n4.0.5.\nElectric range(3):\nkm\n(CV*:… km)(3)(3i)\n’\n(c) the explanatory notes relating to Annex IV are amended as follows:\n(i) explanatory note (9) is replaced by the following:\n‘(9)\nIndicate the following value according to the category of the vehicle:\nfor (sub) categories: L1e, L2e, L6e, L7e-B1, L7e-C: the measured maximum speed of the vehicle;\nfor (sub) categories L3e, L4e, L5e, L7e-A and L7e-B2: the maximum design vehicle speed.\nfor cycles designed to pedal (L1e): suppress this entry of the certificate of conformity’;\n(ii) explanatory note (n) is deleted;\n(iii) explanatory note (o) is replaced by the following:\n‘(o)\nRound the values to the nearest whole number for dB(A), Wh/ km, mg/ km, g/km, ppm, mm, kg, km and km/ h; to the nearest tenth for kW, l/ 100 km, kg/ 100 km, m3/ 100 km and for % vol; and to the nearest hundredth for kW/ kg and for m-1.’;\n(iv) explanatory note (p) is deleted;\n(v) the second explanatory note (s) below explanatory note (t) is deleted;\n(vi) the following explanatory note (u) is inserted:\n‘(u)\nThe information contained in this entry shall be stated in entry No 04. “Vehicle category” of the certificates of conformity issued in accordance with the template set out in Annex IV to Directive 2002/24/EC.’;\n(vii) the following explanatory note (3r) is inserted:\n‘(3r)\nOnly applicable for vehicle category L3e’.\n(3) Annex V is amended as follows:\n(a) point 3.1.6. is replaced by the following:\n‘3.1.6.\nThe existence of measures taken by the manufacturer to ensure the traceability of the vehicle referred to in point 3.1.5. needs not be checked at the time of the type-approval.’;\n(b) point 3.2.8. is replaced by the following:\n‘3.2.8.\nThe vehicle identification number shall, if possible, be presented on a single line. When the VIN is marked on two lines, the beginning and the end of the VIN shall be limited by one symbol at the choice of the manufacturer which should neither be a Roman capital letter nor an Arabic numeral.’\n(c) in Appendix 1, point 5 is replaced by the following:\n‘5.\nExample for a L3e-A3 motorcycle with additional information for the converted vehicle (CV), a L3e-A2 motorcycle, outside the clearly marked rectangle. In this case for the purpose of a temporary and reversible manufacturer's authorised modification to the first registered L3e-A3 motorcycle in order to register it nationally after its conversion as a reduced-power L3e-A2 configuration (e.g. for vehicle operators with A2 driving licence):\nMOTORUDOLPH\nL3e-A3\ne4*168/2013*2691\nJRM00DBP008002211\n84 dB(A) — 4 250 min-1\nmax 352 kg\nL3e-A2\ne4*168/2013*2692\n83 dB(A) — 3 750 min-1\n35 kW’.\n(4) Annex VI is amended as follows:\n(a) in Appendix 1, in Section III, entry 2.1. is replaced by the following:\n‘\n2.1.\nThe approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy(6).\n’\n(b) Appendix 2 is amended as follows:\n(i) in Section III, entry 4.1. is replaced by the following:\n‘\n4.1.\nThe approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy(6).\n’\n(ii) in Section III, the first indent under ‘NB:’ is replaced by the following:\n‘If this model is used for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 40 of Regulation (EU) No 168/2013, the heading of the certificate shall read ‘EU WHOLE-VEHICLE PROVISIONAL TYPE-APPROVAL CERTIFICATE VALID ONLY ON THE TERRITORY OF …(5)’. The provisional type-approval certificate shall also specify the restrictions that have been imposed as to its validity and the waivers which have been applied in accordance with Article 30(4) of Regulation (EU) No 168/2013.’\n(iii) the explanatory notes related to Appendix 2 are replaced by the following:\n‘Explanatory notes relating to Appendix 2\n(Footnotes and explanations not to be stated on the type-approval certificate)\n(1)\nDelete where not applicable.\n(2)\nIndicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I.\n(3)\nClassified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A1E’ for a low-performance Enduro motor-cycle.\n(4)\nSee section 2.\n(5)\nIndicate the Member State.\n(6)\nApplicable only for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 40 of Regulation (EU) No 168/2013.\n(7)\nApplicable only for vehicle type-approval for a national small series, pursuant to Article 42 of Regulation (EU) No 168/2013.\n(8)\nIndicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) 168/2013, according to the amendment applied for the EU type-approval.’;\n(c) in Appendix 4, in Section II, the following entries 4a. and 4a.1. are inserted before entry 5.:\n‘\n4a.\nThe approval is granted/extended/refused/withdrawn(1)\n4a.1.\nThe approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and its validity is thus limited to dd/mm/yyyy(5).\n’\n(d) Section II of Appendix 5 is amended as follows:\n(i) the following entries 4a. and 4a.1. are inserted before entry 5.:\n‘\n4a.\nThe approval is granted/extended/refused/withdrawn(1)\n4a.1.\nThe approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and its validity is thus limited to dd/mm/yyyy(5).\n’\n(ii) entry 5. is replaced by the following:\n‘\n5.\nRestrictions of validity(1)(5): …\n’\n(iii) entry 6. is replaced by the following:\n‘\n6.\nWaivers applied(1)(5): …\n’\n(5) Annex VII is amended as follows:\n(a) in point 4., table 1 is deleted;\n(b) point 5. is replaced by the following:\n‘5.\nCodification for the numbering system of EU type-approval certificates of systems, components and separate technical units\nTable 1\nCodification for the numbering system of EU type-approval certificates of systems, components and separate technical units\nLIST I — Environmental and propulsion unit performance requirements\nSystem or component/separate technical unit (STU)\nCommission Delegated Regulation (EU) No\nalphanumerical character\nSystem: engine emissions (Euro 4 stage)\n134/2014\nA1\nSystem: engine emissions (Euro 5 stage)\n134/2014\nA2\nSystem: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.1. to 1.4.3 of Annex IV to Regulation (EU) 168/2013)\n134/2014\nB1\nSystem: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.4. to 1.4.6 of Annex IV to Regulation (EU) 168/2013)\n134/2014\nB2\nSystem: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.7. to 1.4.8 of Annex IV to Regulation (EU) 168/2013)\n134/2014\nB3\nSystem: environmental on-board diagnostic (OBD Stage I: point 1.8.1. to 1.8.2 of Annex IV to Regulation (EU) 168/2013)\n134/2014\nC1\nSystem: environmental on-board diagnostic (OBD Stage II: point 1.8.3. of Annex IV to Regulation (EU) 168/2013)\n134/2014\nC2\nSystem: sound level\n134/2014\nD\nSystem: propulsion unit performance\n134/2014\nE\nSystem: maximum torque and a maximum net power of a propulsion unit\n134/2014\nE1\nSTU: pollution-control device\n134/2014\nF\nSTU: noise-abatement device\n134/2014\nG\nSTU: exhaust device (pollution-control device and noise-abatement device)\n134/2014\nH\nLIST II — Vehicle functional safety requirements\nSystem or component/separate technical unit (STU)\nCommission Delegated Regulation (EU) No\nalphanumerical character\nSystem: braking\n3/2014\nJ\nSystem: installation of lighting and light-signalling devices\n3/2014\nK\nSystem: roll-over protective structure (ROPS)\n3/2014\nL\nSystem: installation of tyres\n3/2014\nM\nSystem: installation of audible warning devices\n3/2014\nAA\nSystem: installation of glazing, windscreen wipers and defrosting and demisting devices\n3/2014\nAB\nSystem: identification of controls, tell-tales and indicators\n3/2014\nAC\nSystem: safety belt anchorages\n3/2014\nAD\nSystem: steer-ability, cornering properties and turn ability\n3/2014\nAE\nSystem: vehicle occupant protection, including interior fittings, head restraint and vehicle doors\n3/2014\nAF\nComponent/STU: audible warning device\n3/2014\nN\nComponent/STU: non-glazing front windscreen\n3/2014\nO\nComponent/STU: windscreen washer device\n3/2014\nP\nComponent/STU: rearward visibility device\n3/2014\nQ\nComponent/STU: safety belts\n3/2014\nR\nComponent/STU: seating position (saddle/seat)\n3/2014\nS\nLIST III — Vehicle construction and general type-approval requirements\nSystem or component/separate technical unit (STU)\nCommission Delegated Regulation (EU) No\nalphanumerical character\nSystem: functional on-board diagnostics (OBD Stage I: point 1.8.1. to 1.8.2 of Annex IV to Regulation (EU) 168/2013)\n44/2014\nT1\nSystem: functional on-board diagnostics (OBD Stage II: point 1.8.3. of Annex IV to Regulation (EU) 168/2013)\n44/2014\nT2\nSTU: trailer coupling device\n44/2014\nU\nSTU: devices to prevent unauthorised use\n44/2014\nV\nSTU: passenger handholds\n44/2014\nW\nSTU: footrests\n44/2014\nX\nSTU: side-car\n44/2014\nY\nSTU: fuel tank\n44/2014\nZ\n’\n(6) Annex VIII is amended as follows:\n(a) item 2.2.1.3.3. is replaced by the following:\n‘2.2.1.3.3.\nType II test results(3):\nTable 5-2\nTest type II results\nTest\nHC (ppm)\nCO(% vol.)\nLambda\nEngine speed (min-)\nEngine oil temperature (K)\nMeasured & corrected value of absorption coefficient(m-1)\nPI: Low idle test\n—\nPI: High idle test\n—\nCI — Free acceleration test / Smoke opacity test results\n—\n—\n—\n—\n—\n’\n(b) items 2.2.1.8.6. and 2.2.1.8.7. are replaced by the following:\n‘2.2.1.8.6.\nCO2 emissions and fuel consumption(3)\nTable 5-8\nTest Type VII result table for propulsions equipped with a combustion engine only or equipped with not-externally-chargeable (NOVC) hybrid electric propulsion\nWhere applicable.\nRound to 2 decimal places.\nRound to 4 decimal places.\nRound to 0 decimal places\nSet Ki = 1 in case:\n(a) the vehicle is not equipped with a periodically regenerating emission abatement system or;\n(b) the vehicle is not a hybrid electric vehicle.\nTest Type VII Test Results (TRTTVII)\nTest No\nCO2(g/km)\nFuel consumption(l/100km) or (kg/100 km)\nTRTTI Measured x\n1\n2\n3\nTRTTI Measured Mean\nKi\n(no unit )\nTRTTVIIx =\nKi · TRTTI Measured x Mean\nCO2 and Fuel consumption as declared by the manufacturer\n—\n2.2.1.8.7.\nCO2 emissions/fuel consumption (manufacturer's declared values)(3)\nElectric energy consumption and electric range(3):\nTable 5-9\nTest Type VII result table for pure electric propulsion or not-externally-chargeable (NOVC) propulsions equipped with an electric motor for propulsion\nMeasured electric energy consumption(Wh/km)\nDeclared electric energy consumption(Wh/km)\nMeasured electric range(km)\nDeclared electric range(km)\nPure electric powertrain\nNOVC hybrid electric powertrain\n’;\n(c) in point 2.2.1.10.9., Table 5-13 is replaced by the following:\n‘\nTable 5-13\nTest result requirements regarding sound level\nSound emission level\nEuro 4\nEuro 5\nSound level limits\nAnnex VI(D) to Regulation (EU) No 168/2013\nEquivalent UNECE sound level limits to Annex VI(D) to Regulation (EU) No 168/2013\nAnnex VI(D) to Regulation (EU) No 168/2013\nTest requirements\nAnnex VIII to Regulation (EU) No 168/2013\nUNECE Regulations referred to in Annex VI(D) to Regulation (EU) No 168/2013\nUNECE Regulations referred to in Annex VI(D) to Regulation (EU) No 168/2013\nAdministrative requirements for vehicle subcategories regarding sound level:\nVehicle (sub)categories\nL1e, L6e-A\nAnnex I to UNECE Regulation No 63\nUNECE Regulation No 63\nL3e\nAnnex I to UNECE Regulation No 41\nUNECE Regulation No 41\nL2e, L4e, L5e, L6e-B, L7e\nAnnex I to UNECE Regulation No 9\nUNECE Regulation No 9\nReplacement exhaust noise-abatement devices all categories\nAnnex I to UNECE Regulation No 92\nUNECE Regulation No 92\n’\n(d) in point 2.2.1.10.11., Table 5-14 is replaced by the following:\n‘\nTable 5-14\nSound level test results Euro 4 or Euro 5\nVehicle category\nPropulsion class\nEuro 4 sound level limitSLEU4 (dB(A)) / Euro 4 test results TRTTIXEU4 (dB(A))& (% of SLEU4)\nEuro 4 sound test procedure\nEuro 5 sound level limitSLEU5 (dB(A)) / Euro 5 test results TRTTIXEU5 (dB(A)) & (% of SLEU5)\nEuro 5 sound test procedure\nL1e-A\nPI / CI / Hybrid\nSLEU4:63\nCommission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 63\nSLEU5:\nUNECE Regulation No 63\nTRTTIXEU4:\nTRTTIXEU5:\nL1e-B\nPI / CI / Hybrid\nvmax ≤ 25 km/h\nSLEU4:66\nSLEU5:\nTRTTIXEU4:\nTRTTIXEU5:\nPI / CI / Hybrid\nvmax ≤ 45 km/h\nSLEU4:71\nSLEU5:\nTRTTIXEU4:\nTRTTIXEU5:\nL2e\nPI / CI / Hybrid\nSLEU4:76\nCommission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9\nSLEU5:\nUNECE Regulation No 9\nSTREU4:\nSTREU5:\nL3e\nPI / CI / Hybrid\nPMR ≤ 25\nSLEU4:73\nUNECE Regulation No 41\nSLEU5:\nUNECE Regulation No 41\nTRTTIXEU4:\nTRTTIXEU5:\nPI / CI / Hybrid\n25 < PMR ≤ 50\nSLEU4:74\nSLEU5:\nSTREU4:\nSTREU5:\nPI / CI / Hybrid\nPMR > 50\nSLEU4:77\nSLEU5:\nTRTTIXEU4:\nTRTTIXEU5:\nL4e\nPI / CI / Hybrid\nSLEU4:80\nCommission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9\nSLEU5:\nUNECE Regulation No 9\nTRTTIXEU4\nTRTTIXEU5:\nL5e-A\nPI / CI / Hybrid\nSLEU4:80\nCommission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9\nSLEU5:\nUNECE Regulation No 9\nSTREU4:\nSTREU5:\nL5e-B\nPI / CI / Hybrid\nSLEU4:80\nSLEU5:\nSTREU4:\nSTREU5:\nL6e-A\nPI / CI / Hybrid\nSLEU4:80\nCommission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 63\nSLEU5:\nUNECE Regulation No 63\nTRTTIXEU4:\nTRTTIXEU5:\nL6e-B\nPI / CI / Hybrid\nSLEU4:80\nCommission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9\nSLEU5:\nUNECE Regulation No 9\nTRTTIXEU4:\nTRTTIXEU5:\nL7e-A\nPI / CI / Hybrid\nSLEU4:80\nSLEU5:\nTRTTIXEU4:\nTRTTIXEU5:\nL7e-B\nPI / CI / Hybrid\nSLEU4:80\nSLEU5:\nTRTTIXEU4:\nTRTTIXEU5:\nL7e-C\nPI / CI / Hybrid\nSLEU4:80\nSLEU5:\nTRTTIXEU4\nTRTTIXEU5:\n’\n(e) items 2.2.1.10.12.and 2.2.1.10.13. are replaced by the following:\n‘\n2.2.1.10.12.\nStationary sound level: …dB(A) at engine speed: …min-1\n2.2.1.10.13.\nReplacement noise-abatement device(s) make(s) and type(s) (3): …\n’;\n(f) the following item 2.2.1.10.14. is inserted:\n‘\n2.2.1.10.14.\nLocation of the type-approval number (add drawings, photographs) (3): …\n’.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "(+) x yes - no or not separately available o optional."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "(++) d directly on control, indicator or tell-tale c in close vicinity."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "(+) x yes - no or not separately available o optional."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "(++) d directly on control, indicator or tell-tale c in close vicinity.’;"
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "OJ L 120, 7.5.2011, p. 1."
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "OJ L 72, 14.3.2008, p. 1.’"
    },
    {
      "type": "footnote",
      "label": "f7",
      "text": "Where applicable."
    },
    {
      "type": "footnote",
      "label": "f8",
      "text": "Round to 2 decimal places."
    },
    {
      "type": "footnote",
      "label": "f9",
      "text": "Round to 4 decimal places."
    },
    {
      "type": "footnote",
      "label": "f10",
      "text": "Set Ki = 1 in case: (a) the vehicle is not equipped with a periodically regenerating emission abatement system or; (b) the vehicle is not a hybrid electric vehicle."
    },
    {
      "type": "footnote",
      "label": "f11",
      "text": "Round to 0 decimal places"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2016/1825/annex",
    "retrieved_at": "2026-11-01T14:45:25.916146+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}