{
  "url": "https://openlegislation.uk/eu-regulation-2016-425/annex-V/division-EU/division-6/division-6.2",
  "json_url": "https://openlegislation.uk/eu-regulation-2016-425/annex-V/division-EU/division-6/division-6.2.json",
  "legislation": "eur/2016/425",
  "legislation_title": "Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2016-425",
  "path": "annex/V/division/EU/division/6/division/6.2",
  "kind": "division",
  "number": "6.2",
  "heading": "The ... type-examination certificate shall contain at least the following information:",
  "text": "(a)the name and identification number of the approved body;\n(b)the name and address of the manufacturer and, if the application is lodged by the authorised representative, the latter's name and address;\n(c)identification of the PPE covered by the certificate (type number);\n(d)a statement that the PPE type complies with the applicable essential health and safety requirements;\n(e)where designated standards have been fully or partially applied, the references of those standards or parts thereof;\n(f)where other technical specifications have been applied, their references;\n(g)where applicable, the performance level(s) or protection class of the PPE;\n(h)for PPE produced as a single unit to fit an individual user, the range of permissible variations of relevant parameters based on the approved basic model;\n(i)the date of issue, the date of expiry and, where appropriate, the date(s) of renewal;\n(j)any conditions attached to the issue of the certificate;\n(k)for category III PPE, a statement that the certificate shall only be used in conjunction with one of the conformity assessment procedures referred to in point (c) of Article 19.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Word in Annex 5 para. 6.2 omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(48)(c); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Word in Annex 5 para. 6.2 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(48)(e); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Annex 5 para. 6.2(e) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(48)(j); 2020 c. 1, Sch. 5 para. 1(1)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2016/425/annex/V/division/EU/division/6/division/6.2",
    "retrieved_at": "2026-11-01T14:45:58.157392+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}