# Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC (Text with EEA relevance), Division 6.2: The ... type-examination certificate shall contain at least the following information:

Extent: E+W+S+N.I.

(a)the name and identification number of the approved body;
(b)the name and address of the manufacturer and, if the application is lodged by the authorised representative, the latter's name and address;
(c)identification of the PPE covered by the certificate (type number);
(d)a statement that the PPE type complies with the applicable essential health and safety requirements;
(e)where designated standards have been fully or partially applied, the references of those standards or parts thereof;
(f)where other technical specifications have been applied, their references;
(g)where applicable, the performance level(s) or protection class of the PPE;
(h)for PPE produced as a single unit to fit an individual user, the range of permissible variations of relevant parameters based on the approved basic model;
(i)the date of issue, the date of expiry and, where appropriate, the date(s) of renewal;
(j)any conditions attached to the issue of the certificate;
(k)for category III PPE, a statement that the certificate shall only be used in conjunction with one of the conformity assessment procedures referred to in point (c) of Article 19.

---
Source: https://www.legislation.gov.uk/eur/2016/425/annex/V/division/EU/division/6/division/6.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2016-425/annex-V/division-EU/division-6/division-6.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.