# Commission Regulation (EU) 2016/646 of 20 April 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (Text with EEA relevance), Annex I

Extent: E+W+S+N.I.

In Appendix 6 to Annex I to Regulation (EC) No 692/2008, Table 1 is amended as follows:
(1) rows ZD, ZE, ZF are replaced by the following:
‘
ZD
Euro 6c
Euro 6-2
M, N1 class I
PI, CI
1.9.2018
31.8.2019
ZE
Euro 6c
Euro 6-2
N1 class II
PI, CI
1.9.2019
31.8.2020
ZF
Euro 6c
Euro 6-2
N1 class III, N2
PI, CI
1.9.2019
31.8.2020
’
(2) the following rows are inserted after row ZF:
‘
ZG
Euro 6d-TEMP
Euro 6-2
M, N1 class I
PI, CI
1.9.2017
1.9.2019
31.12.2020
ZH
Euro 6d-TEMP
Euro 6-2
N1 class II
PI, CI
1.9.2018
1.9.2020
31.12.2021
ZI
Euro 6d-TEMP
Euro 6-2
N1 class III, N2
PI, CI
1.9.2018
1.9.2020
31.12.2021
ZJ
Euro 6d
Euro 6-2
M, N1 class I
PI, CI
1.1.2020
1.1.2021
ZK
Euro 6d
Euro 6-2
N1 class II
PI, CI
1.1.2021
1.1.2022
PLN
Euro 6d
Euro 6-2
N1 class III, N2
PI, CI
1.1.2021
1.1.2022
’
(3) in the key to the table, the following paragraphs are inserted after the paragraph concerning the ‘Euro 6b’ emissions standard:
“Euro 6c” emissions standard ‘Full Euro 6 emission requirements but without quantitative RDE requirements, i.e. Euro 6b emission standard, final particle number standards for PI vehicles, use of E10 and B7 reference fuel (where applicable) assessed on regulatory lab test cycle and RDE testing for monitoring only (no NTE emission limits applied);
“Euro 6d-TEMP” emissions standard Full Euro 6 emission requirements, i.e. Euro 6b emission standard, final particle number standards for PI vehicles, use of E10 and B7 reference fuel (where applicable) assessed on regulatory lab test cycle and RDE testing against temporary conformity factors;’;
(4) in the key to the table, the paragraph concerning the ‘Euro 6c’ emissions standard is replaced by the following:
“Euro 6d” emissions standard ‘Full Euro 6 emission requirements, i.e. Euro 6b emission standard, final particle number standards for PI vehicles, use of E10 and B7 reference fuel (where applicable) assessed on regulatory lab test cycle and RDE testing against final conformity factors;’.

---
Source: https://www.legislation.gov.uk/eur/2016/646/annex/I (the official version)
Page: https://openlegislation.uk/eu-regulation-2016-646/annex-I
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.