# Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance), Appendix 3

Extent: E+W+S+N.I.

PICTOGRAMS
PIC_001
The tachograph may optionally use the following pictograms and pictogram combinations (or pictograms and combination similar enough to be unambiguously identifiable with these):
1..BASIC PICTOGRAMS
People
Actions
Modes of operation
Company
Company mode
Controller
Control
Control mode
Driver
Driving
Operational mode
Workshop/test station
Inspection/calibration
Calibration mode
Manufacturer
Activities
Duration
Available
Current availability period
Driving
Continuous driving time
Rest
Current rest period
Other Work
Current work period
Break
Cumulative break time
Unknown
Equipment
Functions
Driver slot
Co-driver slot
Card
Clock
Display
Displaying
External storage
Downloading
Power supply
Printer/printout
Printing
Sensor
Tyre size
Vehicle/vehicle unit
GNSS facility
Remote Detection facility
ITS interface
Specific conditions
Out of scope
Ferry/train crossing
Miscellaneous
Events
Faults
Start of daily work period
End of daily work period
Location
Manual entry of driver activities
Security
Speed
Time
Total/summary
Qualifiers
24h
Daily
Weekly
Two weeks
From or to
2..PICTOGRAM COMBINATIONS
Miscellaneous
Control place
Location start of daily work period
Location end of daily work period
Position after 3 hours accumulated driving time
From time
To time
From vehicle
Out of scope begin
Out of scope end
Cards
Driver card
Company card
Control card
Workshop card
No card
Driving
Crew driving
Driving time for one week
Driving time for two weeks
Printouts
Driver activities from card daily printout
Driver activities from VU daily printout
Events and faults from card printout
Events and faults from VU printout
Technical data printout
Over speeding printout
Events
Insertion of a non valid card
Card conflict
Time overlap
Driving without an appropriate card
Card insertion while driving
Last card session not correctly closed
Over speeding
Power supply interruption
Motion data error
Vehicle motion conflict
Security breach
Time conflict or time adjustment (by workshop)
Over speeding control
Absence of position information from GNSS receiver or Communication error with the external GNSS facility
Communication error with the remote communication facility
Faults
Card fault (driver slot)
Card fault (co-driver slot)
Display fault
Downloading fault
Printer fault
Sensor fault
VU internal fault
GNSS fault
Remote Detection fault
Manual entries procedure
Still same daily work period ?
End of previous work period ?
Confirm or enter location of end of work period
Enter start time
Enter location of start of work period.
Note: Additional pictogram combinations to form printout blocks or record identifiers are defined in Appendix 4.

---
Source: https://www.legislation.gov.uk/eur/2016/799/annex/1/appendix/3 (the official version)
Page: https://openlegislation.uk/eu-regulation-2016-799/annex-1/appendix-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.