{
  "url": "https://openlegislation.uk/eu-regulation-2016-799/annex-1/division-5/division-5.2/division-396",
  "json_url": "https://openlegislation.uk/eu-regulation-2016-799/annex-1/division-5/division-5.2/division-396.json",
  "legislation": "eur/2016/799",
  "legislation_title": "Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2016-799",
  "path": "annex/1/division/5/division/5.2/division/396",
  "kind": "division",
  "number": "(396)",
  "heading": "The plaque shall bear at least the following details:",
  "text": "name, address or trade name of the approved fitter or workshop,\ncharacteristic coefficient of the vehicle, in the form ‘w = … imp/km’,\nconstant of the recording equipment, in the form ‘k = … imp/km’,\neffective circumference of the wheel tyres in the form ‘l = … mm’,\ntyre size,\nthe date on which the characteristic coefficient of the vehicle and the effective circumference of the wheel tyres were measured,\nthe vehicle identification number,\nthe presence (or not) of an external GNSS facility,\nthe serial number of the external GNSS facility, if applicable,\nthe serial number of the remote communication device, if any,\nthe serial number of all the seals in place,\nthe part of the vehicle where the adaptor, if any, is installed,\nthe part of the vehicle where the motion sensor is installed, if not connected to the gear-box or an adaptor is not being used,\na description of the colour of the cable between the adaptor and that part of the vehicle providing its incoming impulses,\nthe serial number of the embedded motion sensor of the adaptor.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Commission Implementing Regulation (EU) 2018/502 of 28 February 2018 amending Implementing Regulation (EU) 2016/799 laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2016/799/annex/1/division/5/division/5.2/division/396",
    "retrieved_at": "2026-11-01T14:45:49.686558+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}