{
  "url": "https://openlegislation.uk/eu-regulation-2017-1134/annex-I",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-1134/annex-I.json",
  "legislation": "eur/2017/1134",
  "legislation_title": "Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-1134",
  "path": "annex/I",
  "kind": "annex",
  "number": "I",
  "heading": null,
  "text": "CN code\nTARIC\nDescription\nRate of autonomous duty\nSupplementary Unit\nDate foreseen for mandatory review\n*ex 2818 30 00\n30\nAluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)\n0 %\n—\n31.12.2018\nex 2825 70 00\n20\nMolybdic Acid (CAS RN 7782-91-4)\n0 %\n—\n31.12.2021\n*ex 2842 10 00\n40\nAluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (2)\n0 %\n—\n31.12.2021\n*ex 2905 11 00\nex 2905 19 00\n20\n35\nMethyl methanesulphonate (CAS RN 66-27-3)\n0 %\n—\n31.12.2021\nex 2905 22 00\n20\n3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)\n0 %\n—\n31.12.2021\nex 2909 30 90\n15\n{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)\n0 %\n—\n31.12.2021\nex 2909 30 90\n25\n1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane\n0 %\n—\n31.12.2021\n*ex 2909 60 00\n40\n1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)\n0 %\n—\n31.12.2017\nex 2912 19 00\n10\nUndecanal (CAS RN 112-44-7)\n0 %\n—\n31.12.2021\nex 2915 12 00\n10\nAqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)\n0 %\n—\n31.12.2021\n*ex 2916 14 00\n30\nAllyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:\n0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),\n0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and\n0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)\n0 %\n—\n31.12.2020\nex 2916 39 90\n33\nMethyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)\n0 %\n—\n31.12.2021\nex 2916 39 90\n73\n(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)\n0 %\n—\n31.12.2021\n*ex 2920 29 00\nex 2920 90 70\n50\n50\nFosetyl-aluminium (CAS RN 39148-24-8)\n0 %\n—\n31.12.2018\n*ex 2920 29 00\nex 2920 90 70\n60\n40\nFosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (2)\n0 %\n—\n31.12.2021\nex 2922 19 00\n40\n(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)\n0 %\n—\n31.12.2021\nex 2924 29 70\n30\nSodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)\n0 %\n—\n31.12.2021\nex 2924 29 70\n50\nN-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)\n0 %\n—\n31.12.2021\nex 2926 90 70\n30\n4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)\n0 %\n—\n31.12.2021\n*ex 2931 90 00\n05\nDiethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN\n0 %\n—\n31.12.2020\n*ex 2932 14 00\nex 2940 00 00\n10\n40\n1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)\n0 %\n—\n31.12.2019\nex 2932 99 00\n13\n(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)\n0 %\n—\n31.12.2021\nex 2932 99 00\n18\n4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)\n0 %\n—\n31.12.2021\nex 2933 19 90\n45\n5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)\n0 %\n—\n31.12.2021\nex 2933 19 90\n55\n5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)\n0 %\n—\n31.12.2021\nex 2933 29 90\n75\n2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)\n0 %\n—\n31.12.2021\nex 2933 39 99\n10\n2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)\n0 %\n—\n31.12.2021\nex 2933 39 99\n33\n5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)\n0 %\n—\n31.12.2021\nex 2933 39 99\n41\n2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)\n0 %\n—\n31.12.2021\nex 2933 39 99\n46\nFluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2)\n0 %\n—\n31.12.2021\n*ex 2933 59 95\nex 2933 99 80\n88\n51\nDiquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (2)\n0 %\n—\n31.12.2021\nex 2933 99 80\n42\n(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)\n0 %\n—\n31.12.2021\nex 2933 99 80\n44\n(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)\n0 %\n—\n31.12.2021\n*ex 2933 99 80\n53\nPotassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)\n0 %\n—\n31.12.2018\n*ex 2933 99 80\n72\n1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)\n0 %\n—\n31.12.2018\nex 2934 99 90\n46\n4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)\n0 %\n—\n31.12.2021\nex 2934 99 90\n47\nThidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (2)\n0 %\n—\n31.12.2021\nex 2934 99 90\n49\nCytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)\n0 %\n—\n31.12.2021\nex 2934 99 90\n53\n4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)\n0 %\n—\n31.12.2021\nex 2935 90 90\n30\n6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)\n0 %\n—\n31.12.2021\n*ex 3204 16 00\n30\nPreparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:\nColourant Reactive Yellow 201 (CAS RN 27624-67-5),\n1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or\n3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)\n0 %\n—\n31.12.2019\nex 3204 17 00\n22\nColourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight\n0 %\n—\n31.12.2021\n*ex 3204 17 00\n24\nColourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight\n0 %\n—\n31.12.2018\n*ex 3215 90 70\n30\nDisposable cartridge ink, containing by weight:\n1 % or more, but not more than 10 % of amorphous silicon dioxide or\n3,8 % or more of dye C.I. Solvent Black 7 in organic solvents\nfor use in the marking of integrated circuits (2)\n0 %\n—\n31.12.2018\n*ex 3506 91 10\nex 3506 91 90\n50\n50\nPreparation containing by weight:\n15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and\n10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers\ndissolved in:\nMethyl ethyl ketone (CAS RN 78-93-3)\nHeptane (CAS RN 142-82-5), and\nToluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)\n0 %\n—\n31.12.2020\nex 3811 21 00\n11\nDispersing agent and oxidation inhibitor containing:\no-amino polyisobutylenephenol (CAS RN 78330-13-9),\nmore than 30 % by weight but not more than 50 % by weight of mineral oils,\nused in the manufacture of blends of additives for lubricating oils (2)\n0 %\n—\n31.12.2021\n*ex 3811 21 00\n19\nAdditives containing:\na polyisobutylene succinimide based mixture, and\nmore than 30 % but not more than 50 % by weight of mineral oils,\nhaving a total base number of more than 40, for use in the manufacture of lubricating oils (2)\n0 %\n—\n31.12.2019\nex 3811 29 00\n75\nOxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (2)\n0 % (2)\n—\n31.12.2021\nex 3811 90 00\n50\nCorrosion inhibitor containing:\npolyisobutenyl succinic acid and\nmore than 5 % and not more than 20 % by weight of mineral oils\nfor use in the manufacture of blends of additives for fuels (2)\n0 %\n—\n31.12.2021\n*ex 3815 90 90\n40\nCatalyst:\ncontaining molybdenum oxide and other metal oxides in a silicon dioxide matrix,\nin the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm\nfor use in the manufacture of acrylic acid (2)\n0 %\n—\n31.12.2018\nex 3824 99 92\n25\nPreparation containing by weight:\n25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)\n25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)\n10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)\n5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)\n1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)\n1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)\nNot more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)\n0 %\n—\n31.12.2021\nex 3824 99 92\n27\n4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent\n0 %\n—\n31.12.2021\nex 3824 99 92\n30\nAqueous solution of caesium formate and potassium formate containing by weight:\n1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),\n1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and\nwhether or not containing not more than 9 % of additives\n0 %\n—\n31.12.2021\n*ex 3824 99 92\n40\nSolution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent\n0 %\n—\n31.12.2020\n*ex 3824 99 92\n69\nPreparation containing by weight:\n80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)\n7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and\nnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)\n0 %\n—\n31.12.2020\nex 3824 99 93\n45\nSodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:\nnot more than 20 % of disodium sulphate, and\nnot more than 10 % of sodium chloride\n0 %\n—\n31.12.2021\nex 3824 99 96\n70\nPowder containing by weight:\n28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)\n30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)\n17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)\n0 %\n—\n31.12.2021\nex 3824 99 96\n74\nMixture with a non-stoichiometric composition:\nwith a crystalline structure,\nwith a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm\n0 %\n—\n31.12.2021\nex 3824 99 96\n80\nMixture consisting of:\n64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)\n25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and\nnot more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)\n0 %\n—\n31.12.2021\n*ex 3901 10 10\nex 3901 90 80\n20\n50\nHigh flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with\na melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min and\na density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and\na vicat softening temperature of min. 94 °C\n0 %\n—\n31.12.2019\nex 3906 90 90\n53\nPolyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:\n75 % or more but not more than 85 % of polyacrylamide and\n15 % or more but not more than 25 % of polyethylene glycol\n0 %\n—\n31.12.2021\nex 3906 90 90\n63\nCopolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)\n0 %\n—\n31.12.2021\nex 3910 00 00\n45\nDimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)\n0 %\n—\n31.12.2021\nex 3910 00 00\n55\nPreparation containing by weight:\n55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),\n30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and\n1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)\n0 %\n—\n31.12.2021\n*ex 3913 90 00\n30\nProtein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000\n0 %\n—\n31.12.2018\nex 3920 99 59\n70\nTetrafluoroethylene film, put up in rolls, with:\na thickness of 50 μm,\na melting point of 260 °C, and\na specific gravity of 1,75 (ASTM D792)\nfor use in the manufacture of semiconductor devices (2)\n0 %\n—\n31.12.2021\n*ex 3921 13 10\n10\nSheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092\n0 %\n—\n31.12.2018\nex 3921 19 00\n50\nPorous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:\na total thickness of more than 0,05 mm but not more than 0,20 mm,\na water entry pressure between 5 and 200 kPa according to ISO 811, and\nan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5\n0 %\n—\n31.12.2021\n*ex 3923 10 90\n10\nPhotomask or wafer compacts:\nconsisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,\nhaving non porous, abrasion resistant or impact resistant surface properties,\nfitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and\nwith or without a gasket seal,\nof a kind used in the photolithography or other semiconductor production to house photomasks or wafers\n0 %\n—\n31.12.2021\n*ex 3926 30 00\nex 8708 29 10\nex 8708 29 90\n10\n10\n10\nPlastic cover with cips for the exterior rear-view mirror of motor vehicles\n0 %\np/st\n31.12.2020\n*ex 3926 90 97\n20\nHousings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls\n0 %\np/st\n31.12.2019\nex 3926 90 97\nex 8512 90 90\n77\n10\nSilicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems\n0 %\np/st\n31.12.2021\nex 4016 99 57\n10\nAir intake hose for air supply to the combustion part of the engine comprising at least:\none flexible rubber hose,\none plastic hose, and\nmetal clips,\nwhether or not a resonator\nfor use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\nex 4016 99 57\n20\nRubber bumper strip with a silicone coating of a length not more than 1 200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\n*ex 5911 90 99\nex 8421 99 90\n30\n92\nParts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more\n0 %\n—\n31.12.2018\n*ex 5911 90 99\n40\nMulti-layered non-woven polyester polishing pads, impregnated with polyurethane\n0 %\n—\n31.12.2019\nex 6805 30 00\n10\nProbe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (2)\n0 %\n—\n31.12.2021\nex 7318 19 00\n30\nConnecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\n*ex 7410 11 00\nex 8507 90 80\nex 8545 90 90\n10\n60\n30\nRoll of laminate foil of graphite and copper, with:\na width of 610 mm or more but not more than 620 mm, and\na diameter of 690 mm or more but not more than 710 mm,\nfor use in the manufacture of lithium-ion electric rechargeable batteries (2)\n0 %\n—\n31.12.2021\n*ex 7607 11 90\nex 7607 11 90\n47\n57\nAluminium foil in rolls:\nhaving a purity of 99,99 % by weight,\nof a thickness of 0,021 mm or more but not more than 0,2 mm,\nwith a width of 500 mm,\nwith a surface oxide layer by 3 to 4 nm thick,\nand with a cubic texture of more than 95 %\n0 %\n—\n31.12.2021\n*ex 7607 19 90\nex 8507 90 80\n10\n80\nSheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:\na width of 595 mm or more but not more than 605 mm, and\na diameter of 690 mm or more but not more than 710 mm,\nfor use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2)\n0 %\n—\n31.12.2021\n*ex 7616 99 10\nex 8708 99 10\nex 8708 99 97\n30\n60\n50\nAluminium engine bracket, with dimensions of:\nheight of more than 10 mm but not more than 200 mm\nwidth of more than 10 mm but not more than 200 mm\nlength of more than 10 mm but not more than 200 mm\nequipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:\ninternal porosity not more than 1 mm;\nouter porosity not more than 2 mm;\nRockwell hardness HRB 10 or more\nof a kind used in the production of suspensions systems for engines in motor vehicles\n0 %\np/st\n31.12.2019\n*ex 8108 90 30\n20\nBars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 40 (2)\n0 %\n—\n31.12.2017\n*ex 8108 90 50\n10\nAlloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 (2)\n0 %\n—\n31.12.2018\n*ex 8108 90 50\n35\nPlates, sheets and strips of an alloy of titanium\n0 %\n—\n31.12.2021\n*ex 8301 60 00\nex 8413 91 00\nex 8419 90 85\nex 8438 90 00\nex 8468 90 00\nex 8476 90 90\nex 8479 90 70\nex 8481 90 00\nex 8503 00 99\nex 8515 90 80\nex 8536 90 95\nex 8537 10 98\nex 8708 91 20\nex 8708 91 99\nex 8708 99 10\nex 8708 99 97\n20\n40\n30\n20\n20\n20\n83\n30\n70\n30\n95\n70\n10\n20\n50\n40\nKeypads of silicone or plastic,\nwhether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,\nwhether or not printed or surface treated,\nwhether or not with electrical conducting elements,\nwhether or not with keypads foil glued on the keyboard,\nwhether or not with protective foil,\nsingle or multilayer\n0 %\np/st\n31.12.2020\n*ex 8409 91 00\nex 8409 99 00\n30\n50\nExhaust manifold with spiral-shaped gas turbine turbocharger component with:\na heat-resistance of not more than 1 050 °C, and\na turbine wheel hole diameter of 30 mm or more, but not more than 110 mm\n0 %\np/st\n31.12.2018\nex 8409 99 00\n40\nPlastic or aluminum cylinder head cover with:\na camshaft position sensor (CMPS),\nmetal brackets for mounting on an engine, and\ntwo or more gaskets,\nfor use in the manufacture of engines of motor vehicles (2)\n0 %\np/st\n31.12.2021\nex 8411 99 00\n65\nSpiral-shaped gas turbine turbocharger component:\nwith a heat-resistance of not more than 1 050 °C, and\nwith a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm\n0 %\np/st\n31.12.2021\nex 8413 30 20\n30\nSingle-cylinder radial-piston high pressure pump for gasoline direct injection with:\nan operating pressure of 200 bar or more, but not more than 350 bar,\na flow control, and\na pressure relief valve,\nfor use in the manufacture of engines of motor vehicles (2)\n0 %\n—\n31.12.2021\nex 8479 90 70\n87\nFuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (2)\n0 %\np/st\n31.12.2021\nex 8481 80 59\n20\nPressure regulating valve for incorporation into compressors of motor vehicle air condition units (2)\n0 %\np/st\n31.12.2021\nex 8484 20 00\n10\nMechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (2)\n0 %\np/st\n31.12.2021\nex 8501 10 99\n56\nDC Motor:\nwith a speed rotation of not more than 7 000 rpm (without load),\nwith a nominal voltage of 12 V (± 4 V),\nwith a maximum power of 13,78 W (at 3,09 A),\nwith a specified temperature range from – 40 °C to 160 °C,\nwith a gear connection,\nwith a mechanical attachment interface,\nwith 2 electrical connections,\nwith a maximum torque of 100 Nm\n0 %\n—\n31.12.2021\nex 8501 10 99\n58\nDC Motor:\nwith a speed rotation of not more than 6 500 rpm (without load),\nwith a nominal voltage of 12 V (± 4 V),\nwith a maximal power below than 20 W,\nwith a specified temperature range from – 40 °C to 160 °C,\nwith a worm gear drive,\nwith a mechanical attachment interface,\nwith 2 electrical connections,\nwith a maximum torque of 75 Nm\n0 %\n—\n31.12.2021\n*ex 8501 10 99\n65\nElectric turbocharger actuator, with:\na DC motor,\nan integrated gear mechanism,\na (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,\na (pulling) force of 250 N or more in each position of its stroke,\nan effective stroke of 15 mm or more but not more than 25 mm,\nwith or without an on-board diagnostics interface\n0 %\n—\n31.12.2020\n*ex 8504 31 80\n50\nTransformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (2)\n0 %\n—\n31.12.2021\n*ex 8504 40 90\n25\nDirect current to direct current converter\nwithout housing or\nwith housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing\n0 %\np/st\n31.12.2021\nex 8504 50 95\n70\nSolenoid coil with:\na rated power of more than 10 W but not more than 15 W,\nan insulation resistance of 100 M Ohms or more,\na DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,\na rated current of not more than 1,22 A,\na rated voltage of not more than 25 V\n0 %\np/st\n31.12.2021\n*ex 8505 11 00\n65\nPermanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having\na length of not more than 140 mm,\na width of not more than 90 mm, and\na thickness of not more than 55 mm,\nor in the shape of curved rectangle (tile type) having\na length of not more than 75 mm,\na width of not more than 40 mm,\na thickness of not more than 7 mm, and\na radius of curvature of more than 86 mm but not more than 241 mm\nor in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre\n0 %\np/st\n31.12.2018\n*ex 8505 11 00\n75\nA quarter sleeve intended to become permanent magnet after magnetization,\nconsisting of at least neodymium, iron and boron,\nwith a width of 9,1 mm or more but not more than 10,5 mm,\nwith a length of 20 mm or more but not more than 30,1 mm,\nof a kind used on rotors for the manufacture of fuel pumps\n0 %\np/st\n31.12.2019\n*ex 8507 90 80\n70\nCut plate of nickel-plated copper foil, with:\na width of 70 mm (± 5 mm),\na thickness of 0,4 mm (± 0,2 mm),\na length of not more than 55 mm,\nfor use in the manufacture of lithium-ion electric rechargeable batteries (2)\n0 %\np/st\n31.12.2021\nex 8518 40 80\n93\nAudio power amplifier with:\nan output power of 50 W,\nan operating voltage of more than 9 V but not more than 16 V,\nan electrical impedance of not more than 4 Ohm,\na sensitivity of more than 80 dB\nin a metal housing\nfor use in the manufacture of motor vehicles (2)\n0 %\np/st\n31.12.2021\n*ex 8522 90 80\nex 8529 90 92\n30\n57\nMetal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (2)\n0 %\np/st\n31.12.2021\n*ex 8529 90 65\nex 8529 90 92\n65\n53\nPrinted circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module\n0 %\np/st\n31.12.2020\n*ex 8529 90 92\n59\nLCD modules with:\na diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,\na LED backlight,\na printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,\n6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,\nwhether or not in a housing,\nfor permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (2)\n0 %\np/st\n31.12.2020\n*ex 8529 90 92\n63\nLCD module\nwith a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,\nwith or without a touch screen,\nwith an LED backlight,\nwith a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,\nwith a plug for power supply and CAN and LVDS interfaces,\nwith or without electronic components for dynamic adjustments of colour,\nin a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,\nsuitable for installation in motor vehicles of Chapter 87 (2)\n0 %\np/st\n31.12.2020\n*ex 8529 90 92\n67\nColour LCD display panel for LCD monitors of heading 8528:\nwith a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,\nwith or without a touch screen,\nwith backlight, micro-controller,\nwith a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,\nin a housing with or without a heat sink at the back of the housing,\nwithout a signal-processing module,\nwhether or not with haptic and acoustical feedback,\nfor use in the manufacture of vehicles of Chapter 87 (2)\n0 %\np/st\n31.12.2020\n*ex 8536 90 95\n20\nSemiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1 000 V\n0 %\np/st\n31.12.2020\n*ex 8536 90 95\n92\nMetallic stamped frame with connections\n0 %\np/st\n31.12.2018\n*ex 8536 90 95\nex 8544 49 93\n94\n10\nElastomeric connector, of rubber or silicone, consisting of one or more conductor elements\n0 %\np/st\n31.12.2018\nex 8537 10 98\n65\nLever for control module under the steering wheel:\nwith one or more single or multi-positional electrical switches (push-button, rotary or other),\nwhether or not equipped with printed circuit boards and electrical cables,\nfor a voltage of 9 V or more but not more than 16 V,\nof a kind used in the manufacture of motor vehicles of Chapter 87\n0 %\np/st\n31.12.2021\nex 8537 10 98\n75\nControl unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:\nan antenna,\na connector,\na metal holder,\nfor use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\n*ex 8537 10 98\n92\nTouch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors\n0 %\np/st\n31.12.2018\nex 8538 90 99\n60\nFront control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87\n0 %\np/st\n31.12.2021\nex 8543 70 90\n15\nLaminated electrochromic film consisting of:\ntwo outer layers of polyester,\na middle layer of acrylic polymer and silicone, and\ntwo electric connection terminals\n0 %\n—\n31.12.2021\n*ex 8543 70 90\n33\nHigh-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing\n0 %\n—\n31.12.2021\nex 8544 42 90\n80\n12-wire connecting cable containing two connectors\nof a voltage of 5 V,\nwith a length of not more than 300 mm\nfor use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\nex 8708 10 10\nex 8708 10 90\n10\n10\nPlastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\n*ex 8708 30 10\nex 8708 30 91\nex 8708 30 99\n20\n60\n10\nMotor powered brake actuation unit\nwith a rating of 13,5 V (± 0,5 V) and\na ball screw mechanism to control brake fluid pressure in the master cylinder\nfor use in the manufacture of electric motor vehicles (2)\n0 %\np/st\n31.12.2019\n*ex 8708 30 10\nex 8708 30 91\n40\n30\nBody of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2019\n*ex 8708 30 10\nex 8708 30 91\n50\n10\nDrum type parking brake:\noperating within the service brake disk,\nwith a diameter of 170 mm or more but not more than 195 mm\nfor use in the manufacture of motor vehicles (2)\n0 %\np/st\n31.12.2021\n*ex 8708 30 10\nex 8708 30 91\n60\n20\nNon-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2019\n*ex 8708 30 10\nex 8708 30 91\n70\n40\nDuctile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n*ex 8708 40 20\nex 8708 40 50\n20\n10\nAutomatic hydrodynamic gearbox\nwith a hydraulic torque converter,\nwithout transfer box and cardan shaft,\nwhether or not with front differential,\nfor use in the manufacture of motor vehicles of Chapter 87 (2)\n0 %\np/st\n31.12.2020\n*ex 8708 50 20\nex 8708 50 55\n10\n10\nCar axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703\n0 %\np/st\n31.12.2020\n*ex 8708 50 20\nex 8708 50 99\n20\n10\nTransmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle\nof a length of 1 m or more but not more than 2 m,\nof a weight of 6 kg or more but not more than 9 kg\n0 %\np/st\n31.12.2020\n*ex 8708 50 20\nex 8708 50 99\nex 8708 99 10\nex 8708 99 97\n30\n20\n20\n70\nSingle input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:\ntwo electro-magnetic one direction clutches, working in opposite sides,\nan input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, and\na coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth spline\nfor use in the manufacture of all-terrain vehicles or utility task vehicles (2)\n0 %\n—\n31.12.2021\n*ex 8708 80 20\nex 8708 80 35\n10\n10\nUpper strut insulator containing\na metal holder with three mounting screws, and\na rubber bump\nof a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n*ex 8708 80 20\nex 8708 80 91\n20\n10\nRear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\n*ex 8708 80 20\nex 8708 80 91\n30\n20\nRear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\nex 8708 80 99\n10\nStabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\n*ex 8708 91 20\nex 8708 91 35\n20\n10\nAluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2019\n*ex 8708 91 20\nex 8708 91 99\n30\n30\nAluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:\nan insulating area flatness of not more than 0,1 mm,\na permissible particle quantity of 0,3 mg per tank,\na distance between pores of 2 mm or more,\npore sizes of not more than 0,4 mm, and\nnot more than 3 pores larger than 0,2 mm\nof a kind used in heat exchangers for car cooling systems\n0 %\np/st\n31.12.2020\n*ex 8708 94 20\nex 8708 94 35\n10\n20\nRack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2019\n*ex 8708 95 10\nex 8708 95 99\n40\n10\nFront passenger airbag composed of:\na metal housing with at least six mounting brackets,\nan embedded safety cushion,\na cartridge filled with compressed gas\nof a kind used in the manufacture of goods of Chapter 87\n0 %\np/st\n31.12.2020\nex 8708 99 10\nex 8708 99 97\n30\n15\nFront radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\nex 8708 99 10\nex 8708 99 97\n40\n25\nSupport bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2)\n0 %\np/st\n31.12.2021\n*ex 8714 91 30\nex 8714 91 30\nex 8714 91 30\n25\n35\n72\nFront forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (2)\n0 %\n—\n31.12.2018\n*ex 9013 80 90\n20\nElectronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:\none or more monolithic application-specific integrated circuits (ASIC),\none or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material\nof a kind used for incorporation into products of Chapters 84 to 90 and 95\n0 %\np/st\n31.12.2019",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/1134/annex/I",
    "retrieved_at": "2026-11-01T14:44:50.608385+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}