# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 4.3.2.5.2: Mechanical drag modelling


Mechanical drag consisting of separate components representing tyre Dtyre and front and rear axle frictional losses, Df and Dr, including transmission losses) shall be modelled as a three-term polynomial as a function of vehicle speed v as in the equation below:
Dmech=Am+ Bmv+ Cmv2where:
Am, Bm, and Cm are determined in the data analysis using the least squares method. These constants reflect the combined driveline and tyre drag.
In the case that the tested vehicle is the representative vehicle of a road load matrix family, the coefficient Bm shall be set to zero and the coefficients Am and Cm shall be recalculated with a least squares regression analysis.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/4/division/division/4./division/4.3./division/4.3.2./division/4.3.2.5./division/4.3.2.5.2. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-4./division-4.3./division-4.3.2./division-4.3.2.5./division-4.3.2.5.2.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

