# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 4.3.2.6.1: Determining calibration coefficients


If not previously determined, calibration factors to correct for vehicle blockage shall be determined for relative wind speed and yaw angle. Vehicle speed v, relative wind velocity vr and yaw Y measurements during the warm-up phase of the test procedure shall be recorded. Paired runs in alternate directions on the test track at a constant velocity of 80 km/h shall be performed, and the arithmetic average values of v, vr and Y for each run shall be determined. Calibration factors that minimise the total errors in head and cross winds over all the run pairs, i.e. the sum of (headi – headi+1)2, etc., shall be selected where headi and headi+1 refer to wind speed and wind direction from the paired test runs in opposing directions during the vehicle warm-up/stabilization prior to testing.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/4/division/division/4./division/4.3./division/4.3.2./division/4.3.2.6./division/4.3.2.6.1. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-4./division-4.3./division-4.3.2./division-4.3.2.6./division-4.3.2.6.1.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

