{
  "url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-4./division-4.4./division-4.4.3./division-4.4.3.1.",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-4./division-4.4./division-4.4.3./division-4.4.3.1..json",
  "legislation": "eur/2017/1151",
  "legislation_title": "Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-1151",
  "path": "annex/Sub/4/division/division/4./division/4.4./division/4.4.3./division/4.4.3.1.",
  "kind": "division",
  "number": "4.4.3.1",
  "heading": "Calculation process",
  "text": "Arithmetic average velocity vjm, in km/h, and arithmetic average torque Cjm, in Nm, of each measurement shall be calculated from the data sets collected in paragraph 4.4.2.2. of this Sub-Annex using the following equations:\nvjm=1k∑i= 1kvjiand\nCjm=1k∑i= 1kCji− Cjswhere:\nvjiis the actual vehicle speed of the ith data set at reference speed point j, km/h;\nkis the number of data sets in a single measurement;\nCjiis the actual torque of the ith data set, Nm;\nCjsis the compensation term for speed drift, Nm, given by the following equation:\nCjs=mst+ mr× αjrj.Cjs1k∑ki= 1Cji shall be no greater than 0,05 and may be disregarded if αj is not greater than ± 0,005 m/s2;\nmstis the test vehicle mass at the start of the measurements and shall be measured immediately before the warm-up procedure and no earlier, kg;\nmris the equivalent effective mass of rotating components according to paragraph 2.5.1. of this Sub-Annex, kg;\nrjis the dynamic radius of the tyre determined at a reference point of 80 km/h or at the highest reference speed point of the vehicle if this speed is lower than 80 km/h, calculated according to the following equation:\nrj=13,6×vjm2× πn\nwhere:\nnis the rotational frequency of the driven tyre, s-1;\nαjis the arithmetic average acceleration, m/s2, which calculated using the following equation:\nαj=13,6×k∑ki= 1tivji−∑ki= 1ti∑ki= 1vjik×∑ki= 1t2i−∑ki= 1ti2where:\ntiis the time at which the ith data set was sampled, s.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/4/division/division/4./division/4.4./division/4.4.3./division/4.4.3.1.",
    "retrieved_at": "2026-11-01T14:44:48.753743+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}