# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 6.5.1.2: Vehicle restraint system


The dynamometer shall be equipped with a centring device aligning the vehicle within a tolerance of ± 0.5 degrees of rotation around the z-axis. The restraint system shall maintain the centred drive wheel position throughout the coastdown runs of the road load determination within the following limits:
6.5.1.2.1.Lateral position (y-axis)
The vehicle shall remain aligned in the y-direction and lateral movement shall be minimised.
6.5.1.2.2.Front and rear position (x-axis)
Without prejudice to the requirement of paragraph 6.5.1.2.1. of this Sub-Annex, both wheel axes shall be within ± 10 mm of the belt’s lateral centre lines.
6.5.1.2.3.Vertical force
The restraint system shall be designed so as to impose no vertical force on the drive wheels.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/4/division/division/6./division/6.5./division/6.5.1./division/6.5.1.2. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-6./division-6.5./division-6.5.1./division-6.5.1.2.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

