# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 6.5.2.1: Preconditioning


The vehicle shall be conditioned on the dynamometer as described in paragraphs 4.2.4.1.1. to 4.2.4.1.3. inclusive of this Sub-Annex.
The dynamometer load setting Fd, for the preconditioning shall be:
Fd=ad+ bd× v+ cd× v2where:
ad0
bd0;
cdCD× Af×ρ02×13,62
The equivalent inertia of the dynamometer shall be the test mass.
The aerodynamic drag used for the load setting shall be taken from paragraph 6.7.2. of this Sub-Annex and may be set directly as input. Otherwise, ad, bd, and cd from this paragraph shall be used.
At the request of the manufacturer, as an alternative to paragraph 4.2.4.1.2. of this Sub-Annex, the warm-up may be conducted by driving the vehicle with the flat belt.
In this case, the warm-up speed shall be 110 per cent of the maximum speed of the applicable WLTC and the duration shall exceed 1 200 seconds until the change of measured force over a period of 200 seconds is less than 5 N.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/4/division/division/6./division/6.5./division/6.5.2./division/6.5.2.1. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-6./division-6.5./division-6.5.2./division-6.5.2.1.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

