# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 7.3.4.3.3: The cycle energy demand calculated according to paragraph 5. of Sub-Annex 7 with corrected road load coefficients f0a, f1a and f2a, for the alternative warm-up procedure shall be equal to or higher than the cycle energy demand calculated with the target road load coefficients f0, f1, and f2, for each applicable phase.


The corrected road load coefficients f0a, f1a and f2a, shall be calculated according to the following equations:
f0a=f0+ Ad_alt− Ad_WLTCf1a=f1+ Bd_alt− Bd_WLTCf2a=f2+ Cd_alt− Cd_WLTC
where:
Ad_alt, Bd_alt and Cd_altare the chassis dynamometer setting coefficients after the alternative warm-up procedure;
Ad_WLTC, Bd_WLTC and Cd_WLTCare the chassis dynamometer setting coefficients after a WLTC warm-up procedure described in paragraph 7.3.4.1. of this Sub-Annex and a valid chassis dynamometer setting according to paragraph 8. of this Sub-Annex.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/4/division/division/7./division/7.3./division/7.3.4./division/7.3.4.3./division/7.3.4.3.3. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/4/division/division-7./division-7.3./division-7.3.4./division-7.3.4.3./division-7.3.4.3.3.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

