# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 3.2.1.1.3.4


If the methane FID is calibrated through the cutter, EM shall be 0.
The equation to calculate CCH4 in paragraph 3.2.1.1.3.2. (case (b)) in this Sub-Annex becomes:
CCH4=CHC(w/NMC)The equation to calculate CNMHC in paragraph 3.2.1.1.3.2. (case (b)) in this Sub-Annex becomes:
CNMHC=CHC(w/oNMC)− CHC(w/NMC)× rhThe density used for NMHC mass calculations shall be equal to that of total hydrocarbons at 273,15 K (0 °C) and 101,325 kPa and is fuel-dependent.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/7/division/division/3./division/3.2./division/3.2.1./division/3.2.1.1./division/3.2.1.1.3./division/3.2.1.1.3.4. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/7/division/division-3./division-3.2./division-3.2.1./division-3.2.1.1./division-3.2.1.1.3./division-3.2.1.1.3.4.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

