# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 3.2.3.2.3: Calculation of cycle energy demand


The cycle energy demand of the applicable WLTC, Ek, and the energy demand for all applicable cycle phases Ek,p, shall be calculated according to the procedure in paragraph 5. of this Sub-Annex, for the following sets, k, of road load coefficients and masses:
k=1f0=f*0,L, f1= f1,H, f2= f*2,L, m= TML(test vehicle L)
k=2f0=f0,H, f1= f1,H, f2= f2,H, m= TMH(test vehicle H)
k=3f0=f0,ind, f1= f1,H, f2= f2,ind, m= TMind(an individual vehicle in the interpolation family)
These three sets of road loads may be derived from different road load families.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/7/division/division/3./division/3.2./division/3.2.3./division/3.2.3.2./division/3.2.3.2.3. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/7/division/division-3./division-3.2./division-3.2.3./division-3.2.3.2./division-3.2.3.2.3.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

