# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 3.3.1.1: Where correction for the background particulate mass from the dilution system has been used, this shall be determined in accordance with paragraph 2.1.3.1. of Sub-Annex 6. In this case, particulate mass (mg/km) shall be calculated using the following equations:


PM=PeVep−PaVap×1−1DF×Vmix+ Vepd
in the case that the exhaust gases are vented outside the tunnel;
and:
PM=PeVep−PaVap×1−1DF×Vmixd
in the case that the exhaust gases are returned to the tunnel;
where:
Vapis the volume of tunnel air flowing through the background particulate filter under standard conditions;
Pais the particulate mass from the dilution air, or the dilution tunnel background air, as determined by the one of the methods described in paragraph 2.1.3.1. of Sub-Annex 6;
DFis the dilution factor determined in paragraph 3.2.1.1.1. of this Sub-Annex.
Where application of a background correction results in a negative result, it shall be considered to be zero mg/km.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/7/division/division/3./division/3.3./division/3.3.1./division/3.3.1.1. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/7/division/division-3./division-3.3./division-3.3.1./division-3.3.1.1.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

